Tender For Repairs To Footpath, Compound Wall, Parapet And Connected Works Under Age B/R -Ii At Ge Dssc Wellington.
Tender Value
44.10 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Footpath, Compound Wall, Parapet And Connected Works Under Age B/R -Ii At Ge Dssc Wellington.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for drain,coping,parepet wall etc complete all as specified and directed. |
| 3 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for rafter,purlin etc complete all as specified and directed. |
| 5 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 7 | Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) complete all as specified and directed. |
| 8 | M&L PCC 1:4:8 type D2 with 40mm graded stone aggregate as in foundation ,fliiing and mass concrete as in sunken floor,sub base floor concrete etc complete all as specified and directed. |
| 9 | M&L for precast cement concrete solid building blocks masonary exc 10 cm in width and setting in cement mortar 1:4, type C-1, 1:3:6 (20 mm graded agregate ) complete all as specified and as directed |
| 10 | M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed. |
| 11 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls for weep hole etc.complete as specified and as directed. |
| 12 | M&L cement concrete 1:3:6 type C-1 (20mm graded aggregate) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed |
| 13 | M&L for providing PCC 1:4:8, type D2, 75mm thick using 40mm graded stone aggregate as a sub base complete all as specified and as directed |
| 14 | M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggragate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 15 | M&L for Precast RCC cover slab ( for manholes )CM 1:2:4, type B1, using 20mm graded stone aggregate with plain faces including setting in CM 1:6 complete all as specified and directed |
| 16 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed. |
| 17 | M&L for TMT bars, 6 to 8mm dia cut to length bent to shape required incl cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 18 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of aggregate of size n exc 10mm and below grade and proper embedding/ laying of inter locking paver blocks into the aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specifed and directetd. |
| 19 | Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in drain / surface channel including necessary form work complete all as specified and as directed. |
| 20 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed |
| 21 | Dismantling of old/existing kerb stone of any size of any description complete all as specifed and directed. |
| 22 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed |
| 23 | M&L for 2 coats of synthetic enamel painting over a coat of priming paint plaster coat on new Brick, Stone, concrete, Asbestos cement plaster surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed |
| 24 | M&L for 2 coats of synthetic enamel painting on Old Brick, Stone, concrete, Asbestos cement plaster surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed |
| 25 | M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 26 | S&F Welded steel wire fabric supplied and fixed complete to wood or steel members N exc 4 kg complete all as specified and as directed. |
| 27 | M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and directed |
| 28 | M&L for heavy duty vitrified unpolished porcelain floor tiles of size 300 x 300mm, 10mm thick of make Neo Deccan Natural of somany or Endura of Johnson or equivalent of other specified makes suitable for heavy vehicle movement, laid in floors /skerting of parepet etc of pattern as approved, pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete and jointed with Ezy Grout with spacers of somany to match complete all as specified and as directed. |
| 29 | M&L for elevation tiles of size 600 mm x 300 mm x 8 to 9 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting/cladding set in 10mm thick CM 1:3 complete all as specified and directed. |
| 30 | M&L Chequered cement concrete coloured tiles 300mm x 300mm and 22-25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 20 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 31 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 32 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 33 | Rendering 10mm thick in cement mortar 1:4 on fair face of brick or concrete finished even and smooth without to using extra cement complete all as specified and as directed |
| 34 | M&L for preparation of new plastered or unplasterd surfaces and applying two coats of cement base paint over on coat of chalk white primer complete all as specified and as directed |
| 35 | M&L for removing the steel gates with or without removing the gate pillars and re-fixing the gates to the existing or new pillars by changing the location of the hinges through necessary cutting and rewelding /re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed |
| 36 | M&L raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses including raking out joints to existing random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and as directed. |
| 37 | M&L for preparation of old plastered surfaces of wall and applying one coat of cement coat paint on external wall of compound wall , retaing wall etc, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender