Bids Are invited for Repair And Overhauling Service - Repair Refurbishment Of Rudder Stock And Associated Bush Sleeves In Ship; Any Other Suitable Brand; No; Buyer Premises - Removal/ Refurbishment Of The Rudder Stock, Fin, Tiller Bearing And Link Tu

Sharing tender

Bids Are invited for Repair And Overhauling Service - Repair Refurbishment Of Rudder Stock And Associated Bush Sleeves In Ship; Any Other Suitable Brand; No; Buyer Premises - Removal/ Refurbishment Of The Rudder Stock, Fin, Tiller Bearing And Link Tube With Associate Components. Carryout The Measurement Of Radial Clearance Between Hull Bush And Sleeve Of Top & Bottom Bush As Per Br 3001 , Removal/ Refurbishment Of The Rudder Stock, Fin, Tiller Bearing And Link Tube With Associate Components. Remove The Rudder, Check The Dimensions Of Lower Sleeve And Bush. Renew The Top And Bottom Bush Or Sleeves As Per Recommendations From User Department If The Clearances Found Excessive. Hull Cartridge Inner Diameter Eccentricity/Ovality To Be Corrected By In-Situ Boring If Required Renewal Of Rudder Seals , Removal/ Refurbishment Of The Rudder Stock, Fin, Tiller Bearing And Link Tube With Associate Components. Carryout Survey Of Rudder Stock Post Lowering/Dismantling And Check For Nicks/Dents/Corrosion Plts Marks On Surface. The Rudder Stocks Should Be Subjected To Ndt. Carryout Metal Build/ Low Thermal Metal Spray If Required And Repair To Restore The Original Dimensions If Required. , Removal/ Refurbishment Of The Rudder Stock, Fin, Tiller Bearing And Link Tube With Associate Components. Jumping Stopper To Be Inspected If Any Wear And Tear Observed Stopper To Be Renewed. Check The Reamer Bolts Of Rudder If Any Slack Observed Renew The Reamer Bolts With Nuts. Positive Locking Is To Be Provided Post Fitment Of Reamer Bolts. All Fasteners To Be Renewed , Repair/Refurbishment Of Actuators. Dismantle All Actuators Check The Pits/Dents/Nicks/Corrosion On Ram Surface/Cylinder Bore Reconditioning Of Metal Build Up And Polishing To Be Carried Out On Ram (Hard Chromium/Electro Planting Coating) If Required And To Be Restore The Original Dimensions. , Repair/Refurbishment Of Actuators. Renew Actuator Packings Seals And End Cover Seals Renew Actuators And Link Tube End Spherical Plain Radial Bearings , Repair/Refurbishment Of Actuators. Pressure Testing Of Actuators As Per Oem Manual , Grease Pipe Line . Check The All Grease Pipe Lines, Renew If Any Damages On Pipe Lines. , Stw And Trials . Post Integration And Refitment Onboard Trials And Stw To Be Undertaken By The Firm In Harbour And At Sea Including Performance To Meet Naval Standards