Tender For Restoration Of Old Uma Devi Mandir At Wuyan P Ore.
Tender Value
17.53 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
35060
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Old Uma Devi Mandir At Wuyan P Ore.
BOQ
| Sl. No. | Item Description |
| 1 | Felling of trees of girth (measured at a height of 1 M above ground level) including cutting of trunck and branches , removing of roots and staking of servicible material and disposeal of unservicible material |
| 2 | Beyond 30cm girth icluding 60cm girth |
| 3 | Beyond 60cm girth icluding 120cm girth |
| 4 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 5 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above |
| 6 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: IN CEMENT MORTAR |
| 7 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge in cement mortar. |
| 8 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 9 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un- loading and stacking etc complete job. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Providing laying dry stone soling /boulder filling including watering hand ramming and carraige complete. |
| 16 | Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in: Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage complete. |
| 17 | Extra for tile bricks masonry with common burnt clay tile bricks in superstructure above plinth level upto floor five level. |
| 18 | 15mm thick plaster 1:2:1 (1 Non-Hydrated lime : 2 sand : 1 Surkhi) as per the Conservation & methodology procudure (using Gour/Gud, Urad dal, husk, methi, resa, Gealfal and all required materials) including Head load etc charges complete job. |
| 19 | Providing and fixing of fine chisselled and dressed Devri Stone of uniform width in flooring incl. chiselling and laying in 1:3 mix of cement mortar incl. pointing of joint complete job. including carriage of all materials involved and head load complete, (4\\" to 6\\" thickness). |
| 20 | Centering and shuttering including strutting propping etc. removal of form work in Foundations, footings, bases of columns etc. and walls for mass concrete. |
| 21 | Centering and shuttering including strutting propping etc. removal of form work in Suspended floors, roofs, landings, balconies and access platforms |
| 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood |
| 23 | Providing and fixing 32mm thick glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. KD wood French Style (One side CNC Carved of required pattern) incl touchwood polish. |
| 24 | Providing and fixing 32mm thick Panelled Door Shutter using 1st class kail wood with carving on one sides as per the approved pattern complete job incl touchwood polish |
| 25 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :KD wood French Style (One side Carved of required pattern)incl touchwood polish 32mm thick. |
| 26 | Providing and fixing of Pinjra Kari Heritage type work as per approved pattern / design of budloo wood complete job with 3.5mm thick glass panes on both sides including Beading & necessary nails and all materials complete. |
| 27 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.) |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 30 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 31 | Providing and laying 04 layer 18 guage plain stainless steel railing of approved make i/c master pillar and boster on alternate steps or equlant i/c welding, polishing as per directions of engineer incharge complete job |
| 32 | Providing and fixing of hardware items of approved brand including cost of screws all complete. |
| 33 | Handles 6\\" |
| 34 | Handles 4\\" |
| 35 | Tower bolt 4\\" |
| 36 | Tower bolt 6\\" |
| 37 | L drop |
| 38 | Providing and fixing of conduit pipe of 25mm dia fan boxes and lightining boxes for electric fittings including embedding in walls complete job |
| 39 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete. Popular wood |
| 40 | Providing & fixing colour coated profile sheets 0.50 mm (tile profile) including providing and fixing of ridges, valleys or hips over all width plain Colour coated Sheets using self drilling and self tapping fasteners of reputed make with purlins sheet using self drilling and self tapping fasteners (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete. |
| 41 | Providing and fixing of color coated iron sheet for soffits/ eaves boardings of specified thickness. |
| 42 | Carriage of materails By Mech.Transport, from source to site of work |
| 43 | Stone agg. 20 MM for an avg lead of 5 km |
| 44 | SAND for an avg lead of 15 km |
| 45 | Stone agg. 40 MMfor an avg lead of 5 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender