Tender For Construction Of Day Care Phc Building At Pithabhuin Of Tangarpali Block Xv Fc For The Year 2024 25
Tender Value
1.20 Crore
Estimated cost
Bid Submission
14 Jul 2026
10 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Day Care Phc Building At Pithabhuin Of Tangarpali Block Xv Fc For The Year 2024 25
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone masonary in cement mortar upto 3.00m height including all costs complete. Stacking the useful materials for reuse and removing the debris 50 mtr lead as per the direction of Engineer-in-charge. |
| 2 | Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed. initial leads and lifts as per the direction of Engineer-in-charge. |
| 3 | Filling in foundation and plinth with excavated earth including watering and ramming as directed by the Engineer-in-charge. |
| 4 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete as per the direction of Engineer-in-charge. |
| 5 | Cement Concrete (1:3:6)using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T&P etc complete as per the direction of Engineer-in-charge. |
| 6 | R.C.C. M-20 grade with 20mm and down grade C.B. chips including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but cost of reinforcement complete as per the direction of Engineer-in-charge. |
| 7 | Ground Floor |
| 8 | Column Base & Footing |
| 9 | Plinth Beam (Grade Beam) |
| 10 | Lintel |
| 11 | Chajja |
| 12 | Column & Beam in Superstructure |
| 13 | Roof Slab |
| 14 | Staircase |
| 15 | First Floor |
| 16 | Column & Beam in Superstructure |
| 17 | Chajja |
| 18 | Roof Slab |
| 19 | Cutting, straightening, coiled or bent up M.S/T.S rod (HYSD Fe 500) including cutting, bending, binding, welding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steelas per the direction of Engineer-in-charge. |
| 20 | Ground Floor |
| 21 | First Floor |
| 22 | Brick work with Fly Ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation&Plinth including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 23 | Brick work with Fly Ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Superstructure including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 24 | Ground Floor |
| 25 | First Floor |
| 26 | Supplying M.S Door, Window grill made out with ms flat , angle of approved design & specification including cost of all materials cost of manufacture, cost of one coat of primer, all taxes T&P etc complete as per the direction of Engineer-in-charge. |
| 27 | Labour charge for fitting,fixing of MS door,window, grill, Gate including all cost etc complete as per the direction of Engineer-in-charge. |
| 28 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 29 | Ground Floor |
| 30 | First Floor |
| 31 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in-charge. |
| 32 | Ground Floor |
| 33 | First Floor |
| 34 | Supplying, fitting and fixing Vitrified tile in floors treads or steps and landing of size 1200mm x 600mm Coloured /Printed series (Homogeneous) laid on 25mm thick cement mortar (1:1) 1cement:1 course sand and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-charge. |
| 35 | Supplying, fitting and fixing Glazed tile in floors treads or steps and landing of size 400mm x 400mm of printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 laid on 25mm thick cement mortar (1:1) 1cement:1 course sand and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-charge. |
| 36 | Supplying, fitting and fixing Granite in floors treads or steps and landing (Above 0.10 Sqm. to 0.40 Sqm) laid on 25mm thick cement mortar (1:1) 1cement:1 course sand and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-charge. |
| 37 | Fixing Vitrified tiles in dados skirting and risers of steps of size 1200mm x 600mm Coloured / Printed series (Homogeneous) on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including all costs complete as per direction of Engineer-in-charge. |
| 38 | Supplying, fitting, fixing of Glazed tiles in dados skirting and risers of steps of size 450mm x 300mm (Plain White) ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including all costs complete as per direction of Engineer-in-charge. |
| 39 | Dressed seasoned sal wood (50mm. to 150mm. & above 2.75m. long.) work framed and fixed (wrought and put up) in frames of doors, windows, ventilators and beams as per the direction of Engineer-in-charge. |
| 40 | Supplying, Fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete as per direction of Engineer-in-charge. |
| 41 | Supplying, fitting and fixing of Two Track sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters, all fittings and fixtures as per direction of Engineer-in-charge. |
| 42 | Providing, fitting and fixing up Mosquito Net with aluminium anodized section No 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and section 4660 as tapered clip and jointing angle No 1855 etc excluding cost of laminated board as per direction of Engineer-in-charge. |
| 43 | Painting 2 coats with any approved paint in new iron works including sand papering, polising surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of Engg-in charge. |
| 44 | Finishing plastered surface of wall surface with Acrylic wall putty (Water based ) & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per the direction of Engineer-in-charge. |
| 45 | Ground Floor |
| 46 | First Floor |
| 47 | Priming 1 coat with wall primer (water bond) of any approved shade including all costs complete as per the direction of Engineer-in-charge. |
| 48 | Ground Floor |
| 49 | First Floor |
| 50 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete as per direction of Engineer-in-charge. |
| 51 | Ground Floor |
| 52 | First Floor |
| 53 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats over 1 coat of primer to give an even shade including cost of weather coat all cost of all labours and T&P etc complete as per the direction of Engineer-in-charge. |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour as per the direction of Engineer-in-charge. |
| 57 | Providing and fixing of wall case/wall almirah made with BWR ply wood (ISI) with laminate both side including all type of fittings such as hangle, lock magnet, chain, channel, screw, blot & nuts etc. jointing finishing to a flush bonded with adhesive etc. complete as per direction of the Engineer-in-charge. |
| 58 | 20mm thick grading plaster (1:4) in finished smooth over roof slab after cleaning the surface including watering, curing complete with cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work as directed by the Engineer-in-charge. |
| 59 | Ground Floor |
| 60 | First Floor |
| 61 | Cement Concrete (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete as per the direction of Engineer-in-charge. |
| 62 | Recessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 63 | -do- (Gr.B) (1.1.2-1.24.2) |
| 64 | -do- (Gr.C) (1.1.3-1.24.2) |
| 65 | Recessed wiring to Fan Point in... |
| 66 | -do- (Gr.B) (1.1.2-1.24.2) |
| 67 | -do- (Gr.C) (1.1.3-1.24.2) |
| 68 | Recessed wiring to Wall Fan Point in... |
| 69 | -do- (Gr.B) (1.1.2-1.24.2) |
| 70 | Recessed wiring to Call Bell Point in |
| 71 | -do- (Gr.C) (1.1.3-1.24.2) |
| 72 | Recessed wiring to Exhaust Fan Point in |
| 73 | -do- (Gr.B) (1.1.2-1.24.2) |
| 74 | -do- (Gr.C) (1.1.3-1.24.2) |
| 75 | S/F of M.S. Box for 2 Module 18 swg |
| 76 | S/F of M.S. Box for 4 Module 18 swg |
| 77 | S/F of M.S. Box for 6 Module 18 swg |
| 78 | S/F of M.S. Box for 8 Module 18 swg |
| 79 | S/F of M.S. Box for 12 Module 18 swg |
| 80 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 81 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 82 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) |
| 83 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Inverter Connection |
| 84 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 85 | S/F of 15A Socket on 2 module for AC |
| 86 | S/F of computer board consisting of 3 nos. of 5 amp modular plug and modular switch and 1no. Of 6 amp Mini MCB, complete with wiring on 12 modular type M.S.box with modular cover. |
| 87 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 88 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 89 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 90 | -do- 4x6 sqmm + 2 x 2.5 sqmm (1.8.10) |
| 91 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 92 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 93 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 94 | S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) |
| 95 | S/F of 63A FOUR POLE MCB C Type ( Make - L&T /Equivalent) |
| 96 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 97 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 98 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 99 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 100 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 101 | S/F of Fan hook S, Type on ceiling. |
| 102 | S/F of step type modular fan regulator |
| 103 | Supply of instalation, Testing commissioning of 13 Watt. LED bulb |
| 104 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB |
| 105 | S/F of 10 Watt Bulk Head (Make-Havells) |
| 106 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 107 | Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 108 | S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 109 | S/F of 18W Recess Mount(Round/Square) Type Ceiling light or Portico Light (Havels/crompton/philips/panasonic) |
| 110 | S/F of 400mm A.C. wall fan with all accessories (Make:Usha-Max air ultra/Polycab-Aery HS/Crompton-wmhiflo wave /Havels-Accelero HS/Anchor-Altrix HS/Orient- Wall 43/ Great white- WYNO Pro HS) |
| 111 | S/F of 2000 VA/24V Inverter with 2 nos. 150Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous |
| 112 | S/F of 1.5T 5Star split type AC Machine, Make-Carrier /Blue Star /Hitachi |
| 113 | S/F of Voltage Stabilizer(130-300V) Upto 1.5 Ton AC, Make-Microtech/V-Guard |
| 114 | Supply of 3.5core 35sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable/equivalent) |
| 115 | Laying of MV cable above 25sqmm to 120 sqmm in ground (5.1.2) |
| 116 | Laying of MV cable above 25sqmm to 120 sqmm on surface (Horizontally)(5.5.2) |
| 117 | MAIN DB Supply and fixing of 63A TPN pannel board 1)63A 4P MCCB(36KA)(MAKE-Legrand/Seimens/L&T/C&S) & 100A kitkat &63A Copper Busbar with all accessories. 2)63A Spreader Link-1Set 3)32A DP MCB-4 nos 4)Digital Voltmeter and Ammeter three phase and RYB Indicator. 5)All accesories & connections (Rating and Danger Board) 6)Internal wiring with copper lugs,Wire and other accesories. |
| 118 | Fire bucket MS Capacity 9/10 Liters(Make:Life guard/Equivalent) |
| 119 | Fire bucket stand suitable for 4 buckets(Make:Life guard/Equivalent) |
| 120 | S/F of CO2 type fire Extinguisher of 4.5K.G. Capacity complete with delivery hose horn, Wheel type release valve,Locking rrangement,operation manual and bracket.operating temperature: -30 to +60(Brand Life guard or equivalent) |
| 121 | Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C. |
| 122 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes |
| 123 | (b)110mm dia.U-PVC P-trap |
| 124 | (c)110mm dia.U-PVC HR Bend |
| 125 | (d)110mm dia.U-PVC SWR Double junction door |
| 126 | (e)110mm dia.U-PVC SWR Single junction door |
| 127 | (f)110mm dia.U-PVC SWR door bend |
| 128 | (g)110mm dia.U-PVC SWR Offset |
| 129 | (h)110mm dia.U-PVC SWR plain bend |
| 130 | (i)110mm dia.U-PVC SWR Plain Tee |
| 131 | (j)110mm dia.U-PVC SWR vent cowl |
| 132 | (k)125mm dia CP greatings |
| 133 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(a)375mm thick wall |
| 134 | (b)Roof cutting |
| 135 | Supplying all materials,labour,T&P and fixing water closet,squatting pan (Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1: 5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan(Nycer/Cera/ Hind ware/Parryware) |
| 136 | Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with P&S trap plain (Nycer/Cera/Hindware/Parryware) |
| 137 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 138 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hind ware) |
| 139 | Supplying all materials, labour T&P and fixing Pedestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware) |
| 140 | supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C.(a)600mmx450mmx200mm Steel sink with 40mm dia CP west,west pipe and brackets. |
| 141 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.(a)CP Soap holder |
| 142 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.(a)600mmx450mm B.E.Mirror |
| 143 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C(a)(125x600)mm size glass-shelf with CP Guard rail. |
| 144 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)25mmx600mm long CP towel rail |
| 145 | (b)CP Towel Ring |
| 146 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware) |
| 147 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding & shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3) with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size 760mm x 760mm x 460mm |
| 148 | Supplying all materials,labour,T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method cc(1:3:6)using 40mm size HG metal on bed of the trenches and all round concrete encashing with cc(1:4:8)using 40mm size HG metal,earthwork in excavation in trenches in all kinds of soil refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.(a)110mm dia PVC pipe with allround Hunch top |
| 149 | Supplying all materials,labour,T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonry brickwork gravel packing in the rear of well steining,RCC cover slab in cc(1:1.5:3)using 12mm HG chips,fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering,curing,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a)Soak way Pit 1.20m dia x 2.00m Deep |
| 150 | Factory made FRP(alternately called GRP)doorframe of size 75mmx100mm fabricated using E-glass chopped strand mat(CSM)UV stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thickness of the GRP skins shall not be less than 2.00mm.The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,Six numbers of 260mmx25mmx5mm size 'S' shaped MS flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications.The finish of door frame will be plain colour white/Ivory/ Beige/Light grey/Golden brown/ Mahogany/Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C. |
| 151 | Factory made single leaf rigid FRP(alternately called GRP)sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450gsm E-glass Chopped Strand Mat(CSM)impregnated with orthopthalic palyester resin.The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickn ess and a density of 20kg/cu.mtr shall be used as core material. wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fitting the metal fittings such as tower bolts,aldrops, handles etc shall be provided.A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the salwood reiforcements and the skins.the material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 152 | Supplying all materials,labour,T&P and providing cc(1:3:6)with 4cm size HG metal including watering,curing,conveyance of all materials to worksite, payment of royalty,taxes etc all complete as per specification and direction of the E.I.C. |
| 153 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1)joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. |
| 154 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. |
| 155 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.(a)Initial lift up to 1.50m |
| 156 | (b)From 1.5m to 3.00m depth |
| 157 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 158 | Supplying all materials labour T&P and providing brickwork with KB Brickwork in cm(1:4) F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. |
| 159 | Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3)on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 160 | Supplying all materials labour T&P and providing cement punning for skirting including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 161 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 162 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 163 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing, conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 164 | Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank dulyembedded in cc(1:3:6)all complete as per PH. specification and direction E.I.C. |
| 165 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 166 | Supplying all materials,labour,T&P and providing 110mm dia PVC Tee inside the septic tank including cutting holes and duly embeded in cc(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 167 | Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 168 | Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 169 | Supplying all materials,labour,T&P and construction of masonry staging with providing 1stclass KB brickwork in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC beam of 0.25mx0.30mx 2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering,bending and binding of rod etc watering,curring,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a)2000 lits capacity on the roof of Ground floor |
| 170 | Supplying all material,labour,T&P and Fitting & Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)2000 lits capacity on the roof of 1st floor |
| 171 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a)20mm dia C-PVC Pipe (Internal) |
| 172 | (b)25mm dia U-PVC Pipe(External) |
| 173 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 174 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 175 | Supplying all materials,labour,T&P and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Jaquar Make)(a)15mm dia CP Bib cock |
| 176 | (b)15mm dia CP(LB) Bib cock |
| 177 | (c)15mm dia CP Two way Bib cock |
| 178 | (d)15mm dia CP Pillar cock Elbow action |
| 179 | (e)15mm dia CP Angle stop cock |
| 180 | (f)15mm dia CP Concealed stop cock |
| 181 | (g)15mm dia CP Revolving Shower with shower Arm |
| 182 | (h)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 183 | (i)25mm dia PVC F.W.V. |
| 184 | (j)15mm dia CP Flange |
| 185 | 200mmx150mm Size Bore Well Through DTH Method:- |
| 186 | Labour for drilling of perfactly vertical bore holes as specified dia. For a specified depth below GL through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium, hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No)(a)Drilling of 200mm. dia. Bore- |
| 187 | (b)Drilling 200mm dia. Bore- |
| 188 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I)supplied by the contractor (including cost of pipe)(a)Lowring of 200mm dia pipes- |
| 189 | (b)Cost of 200mm dia PVC casing pipes- |
| 190 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 191 | 1.00HP Single Phase Submersible Pump Set |
| 192 | Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit./Hour & a head-55/70mtr.of reputed make(CRI/KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 193 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 194 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 195 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/ Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 196 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stain less steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C. |
| 197 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 198 | Supply of all materials,labour,T&P and fitting & fixing of 5KW automatic voltage stabilizer having range from 50Volt to 220Volt suitable to run 0.50HP Submersible pump set including electrical connection from the existing mains & with the control panels of the pump set etc.all complete as per specification and direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender