Tender For Remaining Repair And Maintenance Work In 6 Usq And 34 Lsq At Police Thana Bajaj Nagar Jaipur East Commissionerate Jaipur.
Tender Value
44 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
10 days left
EMD
88000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remaining Repair And Maintenance Work In 6 Usq And 34 Lsq At Police Thana Bajaj Nagar Jaipur East Commissionerate Jaipur.
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of Earth, Sand, Lime, Morrum manure or sludge etc. including loading and unloading complete with all lead (G-4/4.1.9) |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.:All kinds of soil (B-1/1.28) |
| 3 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 25mm thick (B-12/12 .3.1) |
| 4 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish : 20mm thick |
| 5 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) (B-13/13.1) |
| 6 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. (B-14/14.55) |
| 7 | Cement, Concrete flooring/ cement plaster/ Cement Concret Road, Plain or RCC work & water retaining works providing and mixing Additive of Synthetic polypropylene Fibrillated mesh fibers free form any reprocess Olefins &comfirming to ASTM C 1116 Type III 4.1.3Having grade 6mm/12mm /18mm melting point of 165 deg.C., strength> 600 mpa Sp. Gravity:0.92g/cc, diameter 10-70 microns. It is required in specified ratio @ 0.25% (125 Gm. Fibers in50 Kg. cement) for use. Mix it directly with contents in rotating site rmxer direction of Engineer m charge with all leads and lifts. (B- 3/3.9) |
| 8 | Supply of wire mesh expended metal size 20-25mm 18 SWG(G-1220) |
| 9 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps i) Chopping lose and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papenng , cleaning of concrete surface with water as necessary and getting dried. ii) Applying Epoxy pnmer on the exposed steel bars. iii) Applying Epoxy hardener and resin mix (as per manufacture's specification) on concrete and steel bars with brush.iv) Spreading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. vi) Cure the plastered surface for 15 days All work including scaffolding etc. complete in all respect. (B-13/13.29) |
| 10 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing m position and binding (including cost of bindingwire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS: 1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) (B-4/4.13.3) |
| 11 | Refebrication work with ex1stmg steel work including cutting, welding& refebrication as per requirement with fixing at site complete as per direction of Engineer In charge (B- 13/13.28) |
| 12 | Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs (B- 717.3.3) |
| 13 | Supplying and fixing m walls machine cut and polished stone shelves tands and in CM 1:3 with machine cut edges Sand or other approved stone 50mm thick (B- |
| 14 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30 mm thick . Commercial Veneer both side (B-8/8.13.2.1) |
| 15 | Providing & Fixing Allu Sheet of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer m charge. 0.8mm thick mica (B-8/8.35.2) |
| 16 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 9.8.1 |
| 17 | Repair of door, window shutters including cost of material and labour for change of damaged : (B-13/13.33) |
| 18 | Style I rail of teak wood 30mm thick/ Aluminium Section 6\\" wide (B-13/ 13.33(a)(ii) |
| 19 | Panel by Shuttering Ply - 9mm thick (Commercial) (B-13/13.33(b)(i) |
| 20 | Wire Gauge 14 mesh x 24 gauge (B- 13/13.33(b)(ii) |
| 21 | Aldrop of mild Steel 12\\" long xl 2mm dia (B-13/13.33( c)(i) |
| 22 | Stopper of Aluminium with Double Rubber Gutka (B-13/13.33(d)(ii) |
| 23 | Steel Hinges For Stone Chowkhat,4\\"size (B-13/13.33(t)(iii) |
| 24 | Grading roof for water proofing treatment with water proffing compound I Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 25 | Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of Roof with & quiring againt fixed our 20 mmth cm. 1:4 joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. |
| 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. (B-14/14.2.1) |
| 27 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in- charge. (14.1) |
| 28 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. (B-11/11.3.2) |
| 29 | Precast terrazo tiles of approved make, 20mm thick with marble chips of size upto 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement sand mortar 1 : 4. Medium shade using approximately 50% white cement and 50% ordinary cement. (B- 11/11.13.2) |
| 30 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete (B- 13/13.23) |
| 31 | Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 5 mm (B- 13/13.4.2) |
| 32 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 1Omm x 1Omm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer in -charge Window openable. (B- 9/9.28. l) |
| 33 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. (B-9/9.26) |
| 34 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if |
| 35 | Providing and laying in position cement concrete including curing, compaction etc. complete m specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement :4 coarse sand 8 graded stone aggregate 40 mm nominal size). |
| 36 | Flyash live bricks superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1 : 4 ( 1 cement : 4 coarse sand) (B-5/5.2.1) |
| 37 | Add extra for Square or Rectangular Pillars in Superstructure brick work up to five storey Upto 45 cm length and two comers are free (B-5/5.3.2) |
| 38 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in Cement Mortar 1:4 ( 1-Cement 4-Sand). (B- 6/6.1.4) |
| 39 | Providing and fixing 50mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 38mm thick cement concrete 1:2:4 ( I-cement : 2-coarse sand 4-graded stone aggregate 20mm thick nominal size) and top layer of 12mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 2Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete. (B-11/11.4) |
| 40 | Half brick masonry in Superstructure above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 41 | Making holes in stone masonry wall upto 450 mm x 450 mm size and making good m CM 1:6. (B- 13/13.19) |
| 42 | Repair to stone masonry in cement sand mortar 1:6 with old and new stone. (B-13/13.12) |
| 43 | Pointing on stone masonry m cement sand mortar 1:3 (1 cement : 3 sand) Raised and cut pointing. (B- 12/12.32.2) |
| 44 | Providing and fixing double scaffolding system on the exterior side, upto five story made with 4\\" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding.Note : This item to be used for maintence work judically (B-13/13 .22) |
| 45 | Supply of Cement sand Mortar 1 : 4 (1 cement : 4 sand) (B-2/2 .3) |
| 46 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate lOmm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design (B= l0/10.22) |
| 47 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding New work (two or more coats) over and including scrapping and priming coat with cement primer. (b-12/12.37.1) |
| 48 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with pnmer,putty, lippy etc complete m all |
| 49 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). (B- 12/12.42) |
| 50 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding New work (Two or more coats applied @ 3.84 kg/10 sqm). (B-12/12.41.1) |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work (B-12/12.46 .1) |
| 52 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 53 | Providing and fixing 1st quality MAT finished erarmc tile size 300x300mm confirming to IS 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). (S-1/1/62) |
| 54 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound@ 0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints,comers, junction with polymer mixed slurry. (B-15/15.3) |
| 55 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 56 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. |
| 57 | p & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100mm vitreous china P or s trapincluding cutting and making good the wall and floor Size 580x440mm. (S-1/1.2.2) |
| 58 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor (S-1/1.3) |
| 59 | P & F water closet Seat Covers with brass hinges complete Solid PVC (IS 2548 marked) grade-I White for EWC (S-1/1.7.2) |
| 60 | Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. (S-1/1.9) |
| 61 | p & F Flush Cock I Flush Valve (IS : 9758 Mark) for WC of approved quality make I CP Brass flush valve 32mm nominal bore (2.14-2.14.10) |
| 62 | P & F WVC wash basin (1st quality, LS. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall Size 580 mm x 450 mm (S- 1/1.36.4) |
| 63 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick (S-1/1.44.1) |
| 64 | p & F Toilet Shelf of approved quality/make Acrylic shelf on C.P. brass casted brackets & guard rail of approved make as per direction of EI of size 550x125mm (S-1/146.5) |
| 65 | p & F Towel Rail or Ring of approved quality/make C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). (S-1/1.47.2) |
| 66 | p & F Grating of approved quality/make C.P. brass with frame (Heavy) & supenor quality size 125mm dia. (S-1/1.48.6) |
| 67 | p & F Soap Dish or Tray of approved quality/make C.P. brass heavy and supenor quality. (S- 1/1.52.2) |
| 68 | P & F Twin- peg of approved quality I make C.P. brass (heavy)Superior quality (S-1/1.53.3) |
| 69 | Making connection of G.I. distribution branch with G.I. mam including all fitting. Upto 25mm dia (S-2/2.3.1) |
| 70 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make |
| 71 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm (S-2/2.7.4) |
| 72 | C.P. Brass bib cock, 15mm nominal bore. (S-2/2.7.3) |
| 73 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make C.P. Brass Concealed Stop Cock 15mm. (S-2/2.8.5) |
| 74 | p & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection with 60 cm long thread and nut (S- 2/2.12.3) |
| 75 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 25mm nominal bore. (S- 2/2.15.3) |
| 76 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. |
| 77 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : |
| 78 | 25mm dia nominal bore |
| 79 | 50mm dia nominal bore |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) |
| 81 | 15 mm nominal outer dia pipes |
| 82 | 25 mm nominal outer dia pipes |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 84 | 32mm nominal outer dia pipes |
| 85 | 40 mm nominal outer dia pipes |
| 86 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 4500 X 4500 mm depth upto 0.5 M Cement cover with frame. |
| 87 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. |
| 88 | 100mm dia |
| 89 | 150mm dia |
| 90 | 230mm dia |
| 91 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe) |
| 92 | 100mm dia S.W. pipe |
| 93 | 150mm dia S.W. pipe |
| 94 | 230mm dia S.W. pipe |
| 95 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. |
| 96 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. |
| 97 | Depth up to 0.5 M |
| 98 | Add extra over item 3.19.1 for every additional 0.10m depth above 0.5 m depth. |
| 99 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make |
| 100 | 75 mm dia |
| 101 | 110 mm dia |
| 102 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make |
| 103 | Coupler |
| 104 | 75mm dia |
| 105 | 110mm dia |
| 106 | Repair Coupler 110mm dia |
| 107 | Door Bend 87.5 Dg.110mm dia |
| 108 | Single Tee 110mm dia |
| 109 | Nahni Trap without Jali 4” 110mm dia |
| 110 | Vent Cowel |
| 111 | 75 mm |
| 112 | 110mm dia |
| 113 | Mechanised Cleaning of sewer line of diameter upto 200mm with the help of trolley mounted electrical driven machine having flexible steel springs of length 20ft. Each which are rotated with the help of electric motor and clutch assembly. |
| 114 | P& F waste Pipe with all fitting P.V.C with C.P nut 32 mm |
| 115 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock Elbow action, 15 mm nominal bore. |
| 116 | P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 600mm |
| 117 | Providing and fixing superior quality PVC Tank Cover complete as per approved by Engineer In Charge 500 Lt. capacity |
| 118 | Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size.500mm dia 12 Kg.-do-15 MT centre point load (medium duty). |
| 119 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia |
| 120 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 121 | Door Bend (Top Side)110mm dia |
| 122 | Plain Tee 110mm dia |
| 123 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design :Depth up to 1.5 M |
| 124 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.50mm dia nominal bore'B' Class |
| 125 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two or more coats on new work. |
| 126 | Raising manhole cover and frames slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately).Rectangular manhole 90x60 cm |
| 127 | 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.37 x 18 x 7 17x15x7 (with drain board) |
| 128 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. |
| 129 | 20 mm |
| 130 | 25 mm |
| 131 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. |
| 132 | Short point (up to 3 mtr.) |
| 133 | Medium point (up to 6 mtr.) |
| 134 | Long point (up to 10 mtr..) |
| 135 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. |
| 136 | On board |
| 137 | Medium point (up to 6 mtr.) |
| 138 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. |
| 139 | 3x 1.5 sq.mm |
| 140 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 141 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 142 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 143 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required. |
| 144 | P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. |
| 145 | 3.0 mm thick |
| 146 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. |
| 147 | Single pole MCB |
| 148 | 6 A to 32 A rating |
| 149 | Double pole MCB |
| 150 | 6 A to 32 A rating |
| 151 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. |
| 152 | Double door (single phase) |
| 153 | 12 Way |
| 154 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. |
| 155 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required |
| 156 | 5 step fan regulator 2 Module |
| 157 | P & F following size mounting grid plates with cover plates |
| 158 | 3 Module |
| 159 | P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. |
| 160 | 3 Module |
| 161 | Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. |
| 162 | With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating |
| 163 | GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip |
| 164 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 165 | 8 SWG G.I. ( Hot Dipped ) Wire |
| 166 | P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. |
| 167 | 1200 mm sweep |
| 168 | P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. |
| 169 | 225 mm sweep |
| 170 | P&F of IP 20 LED tube light 20W with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tubelights,integral driver, 2000 lumens +/- 5% tolerance, system lumens efficacy of 100 lm/watt minimum, expected life time of 25000 burning hours, CCT 5700K, ANSI, CRI 80, Driver efficiency >85%, Life expectancy of driver min. 30000 hrs. PF 0.95 at full load/ 230 volt AC. |
| 171 | P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
| 172 | P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
| 173 | P & F of 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 174 | P & F 3/6 pin 16 amp flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 175 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. |
| 176 | P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required. |
| 177 | P & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender