Tender For Work Of Electrification Of Hostel/Barrack And 01 Investigation Room For 32 Personnel In Hathras Junction Police Station Of Hathras District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
13 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Electrification Of Hostel/Barrack And 01 Investigation Room For 32 Personnel In Hathras Junction Police Station Of Hathras District.
BOQ
| Sl. No. | Item Description |
| 1 | PART-A HOSTEL /BARRACK:-Wiring for light point/Fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable recessed medium class PVC conduit with modular type switch, modular plate, suitable GI box and with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required group B |
| 2 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 3 | Supplying and Fixing 3 pin 5 A ceiling rose on the existing junction box including connections etc as required |
| 4 | Supplying and Fixingpvc batten/angle holder including connections etc as required |
| 5 | Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc as required |
| 6 | Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 A& 15/16A modular socket outlet and15/16 A modular switch connections etc as required |
| 7 | Supplying and drawing of 1x1.5 sqmm of FRLS PVC insulated copper conductor, single core (multi stranded) cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 8 | Supplying and fixing 4 way (4+12) double door horizontal type three pole and netural ,sheet steel , MCB distribution board 415 V on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) |
| 9 | Supplying and fixing 8way spndb double door single pole and netural ,sheet steel , MCB distribution board 230 V on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) |
| 10 | Supplying and fixing 12way spndb double door single pole and netural ,sheet steel , MCB distribution board 230 V on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) |
| 11 | Supplying and fixing 5 A to 32 A rating 240/415 V 10 kA C Curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required single pole |
| 12 | Supplying and fixing 5 A to 32 A rating 240/415 V 10 kA C Curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required double pole |
| 13 | Wiring For circuit /Submain wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x1.5 sqmm +1x1.5 sqmm earth wire |
| 14 | Wiring For circuit /Submain wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x2.5 sqmm +1x2.5 sqmm earth wire |
| 15 | Wiring For circuit /Submain wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x4 sqmm +1x4 sqmm earth wire |
| 16 | Wiring For circuit /Submain wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x6 sqmm +1x6 sqmm earth wire |
| 17 | Wiring For circuit /Submain wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 4x6 sqmm +2x6 sqmm earth wire |
| 18 | Wiring For circuit /Submain wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 4x10 sqmm +2x6 sqmm earth wire |
| 19 | Earthing with G I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 20 | Providing and fixing 25 mm X 5 mm G I strip on surface or in recess for connections etc. as required. |
| 21 | Installation of exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.upto 450 mm sweep |
| 22 | Extra for fixing the louvers / shutters complete with frame for exhaust fans of all sizes. |
| 23 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 24 | S/F Single pole MCB blanking plate |
| 25 | LED Batten light (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement withDriver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test Powder Coated CRCA Sheet Body (Thickness > 0.50 mm)report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).18- 22 Watt |
| 26 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protectionEMI- EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 watt |
| 27 | Supply & fixing of water tight-oblong 10 watt LED Bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity /transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 [Ir Continuous Operation, Complete in All respect, compelete in all respect1100 system lumens, >110Lm/W, PF>0.95, CRI >70, with 3 years warrantee |
| 28 | Supply and fixing of IP 20, Front Lit, Mid Power SMD type: LED Light, recess Surface in otinting round 6 Watt to 9 Walt, Cut out Min 125mm; Height Min 40 mm, LED Down Lighter having Powder coated die cast aluminium Latising with heat sink, High purity/ transmisivity UV Stabilized Non yellowish diffuser/Reflector for uniform light distribution, detachable driver set. suitable for 24 Hr. Continuous Operation, Complete in. All respect. 1660-990 systein lumens, >110 Lm/W, PF>0.95, THD <10% at full lead; CRI>80 with 3 years warrantee. |
| 29 | Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand ali around and protected with burnt bricks on sides and on top as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.95 Sq mm 3.5 Core |
| 30 | S/f of brass nickle plated compression gland 95sqmm 3.5 core |
| 31 | Supply of Fresh Air Fan fan 300mm sweep single phase 900rmp 230/250V, 50 hz (light duty) |
| 32 | Supply of Fresh Air Fan fan 300mm sweep single phase 900rmp 230/250V, 50 hz (Heavy duty) |
| 33 | Supply and fixing LED Bulb 12 watt lumen 810 to 945 complete in all respect. |
| 34 | S/L of 1800x900x12 mm thick chequred rubber mating of tested and quality |
| 35 | S/F of shock Treatmemt Chart (prescribed under IE rules) |
| 36 | S/F of hexagonal Fan box |
| 37 | S/F of lug 1.5 to 2.5 sqmm |
| 38 | S/F of lug 4 sqmm |
| 39 | S/F of lug 6 sqmm |
| 40 | S/F of lug 10 sqmm |
| 41 | S/F of lug 95 sqmm |
| 42 | supply and fixing of fire extinguisher ABC Type 6.00kg capacity (ISI Marked IS : 15683 & TAC approved ) complete with initial charge and wall bracket along with supply of all material and labour for proper complete of work. |
| 43 | supply and fixing of fire extinguisher C02 Type 6.50kg capacity (ISI Marked IS : 2878 & TAC approved ) complete with initial charge and wall bracket along with supply of all material and labour for proper complete of work. |
| 44 | s/f of fire bucket , round bottom made of G.I sheet 9-11 litre capacity duly painted as fire bridgede design suported on hanging bracet chained and locked initialy filled with fine sand com. In all respact |
| 45 | Supplying and fixing 6 to 32 A rating four pole MCB 10 KA C Curve |
| 46 | Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting. M.S. Channel Base with bottom and top cable entries Electrical Control Panel with TPN MCCB's (Four Pole 36KA) with thermal magnetic release) Complete and instrument chamber etc., complete in all respect. The Instrument Chamber shall be separate and shall comprise of flush type digital metering system for phase-to-phase voltage and single-phase voltage, current and other parameter (KVA, PF, KW etc.) in each phase with touch type Selector switches for different readings, instrument fuses, current transformer etc. The Panel Board shall have suitable capacity electrolytic Aluminum Busbar insulated with heat shrink sleeving and mounted on non-hygroscopic support such as CMC/DMC support with detachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp an incoming etc.The job includes the grouting of the board as per directions of Engineer-in-charge. All outgoings of 100Amp and above shall have an ammeter. The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switchboard shall be of cat A & B only.INCOMING:-1. MCCB 150A FP 36KA -01No2. DIGITAL METERING (MFM) -01 Set3. PHASE INDICATOR (R,Y,B) -01 SetOUTGOING: -1. MCCB 32A FP 36KA -05 Nos.BUS BARS:-1. 150A FP ALUMINIUM BUSBAR -01 Set |
| 47 | PART-B Vivechana RoomWiring for light point/Fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable recessed medium class PVC conduit with modular type switch, modular plate, suitable GI box and with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required group C |
| 48 | Supplying and Fixing 3 pin 5 A ceiling rose on the existing junction box including connections etc as required |
| 49 | Supplying and Fixing pvc batten/angle holder including connections etc as required |
| 50 | Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc as required |
| 51 | Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 A & 15/16A modular socket outlet and15/16 A modular switch connections etc as required |
| 52 | Supplying and drawing of 1x1.5 sqmm of FRLS PVC insulated copper conductor, single core (multi stranded) cable .for Inverter in the existing surface/ recessed steel/ PVC conduit as required. |
| 53 | Supplying and fixing 4 way double door horizontal type TPNDB,sheet steel , MCB distribution board 415v, on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) |
| 54 | Supplying and fixing 12 way double door horizontal type SPNDB,sheet steel , MCB distribution board on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) |
| 55 | Supplying and fixing 5 A to 32 A rating 240/415 V 10 kA C Curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required single pole Single pole |
| 56 | Double pole |
| 57 | Tripple pole & Neutral |
| 58 | Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x2.5 sqmm +1x2.5 sqmm earth wire |
| 59 | Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x4 sqmm +1x4 sqmm earth wire |
| 60 | Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x6 sqmm +1x6 sqmm earth wire |
| 61 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 62 | Providing and fixing 25 mm X 5 mm G I strip on surface or in recess for connections etc. as required. |
| 63 | Installation of exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.upto 450 mm sweep |
| 64 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion)less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperaturerise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 65 | S&F single pole MCB blanking plate |
| 66 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. |
| 67 | Extra for fixing the louvers / shutters complete with frame for exhaust fans of all sizes. |
| 68 | Supplying and drawing following pair 0.5 sqmm FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.2 Pair |
| 69 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:25mm |
| 70 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.Telephone socket outlet |
| 71 | Supplying and fixing following size/modules, Gl box alon with modular base & cover plate for modular switches i recess etc as required.1 or 2 module (75mm X 75 mm) |
| 72 | LED Batten light (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement withDriver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test Powder Coated CRCA Sheet Body (Thickness > 0.50 mm)report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).18- 22 Watt |
| 73 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protectionEMI- EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 watt |
| 74 | Supply & fixing of water tight-oblong 10 watt LED Bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity /transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 [Ir Continuous Operation, Complete in All respect, compelete in all respect 1100 system lumens, >110Lm/W, PF>0.95, CRI >70, with 3 years warrantee |
| 75 | Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand ali around and protected with burnt bricks on sides and on top as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10Sq mm 4 Core |
| 76 | S/F brass compression gland for size 10sqmm 4 core |
| 77 | Supply and fixing LED Bulb 12 watt lumen 810 to 945 complete in all respect. |
| 78 | S/F of lug 4 sqmm |
| 79 | S/F of lug 10 sqmm |
| 80 | S/F of lug 2.5 sqmm |
| 81 | S/F of lug 6 sqmm |
| 82 | S/F of hexagonal Fan box |
| 83 | supply and fixing of fire extinguisher ABC Type 4.00kg capacity (ISI Marked IS : 15683 & T&P approved ) complete with initial charge and wall bracket along with supply of all material and labour . |
| 84 | Supply of fresh air Fan 300mm 1-phase 900 rpm,230/250 volts,50Hz. |
| 85 | Supply and Fixing of Lamp based LED 11W Luman 800 mirror light complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender