Tender For Construction Of 4 Nos. Class Room (G+1), Toilet, Septic Tank, Cycle Shed And Other Miscellaneous Construction Work In Upgraded High School, Sarukudar Under Block - Bishnugarh, District :- Hazaribag
Tender Value
95.16 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
6 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hazaribagh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 4 Nos. Class Room (G+1), Toilet, Septic Tank, Cycle Shed And Other Miscellaneous Construction Work In Upgraded High School, Sarukudar Under Block - Bishnugarh, District :- Hazaribag
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in foundation trenches in hard soil (vide classification of soil item - A+B ) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundtion trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I B.C.D.S.O.R No 5.1.1 |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) B.C.D.S.O.R No 5.1.2 |
| 3 | Providing sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all load and lifts including cost of all materials, labours, royelty and taxes all complete as per building specification & direction of E/I B.C.D.S.O.R No 5.1.10 |
| 4 | Providing Class 75B brick flat soling joint filled with local sandincluding cost of watering taxes, royelty all complete as per building specification and direction of E/I B.C.D.S.O.R No 5.6.3 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D.S.O.R No 5.3.1.2 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D.S.O.R No 5.3.1 |
| 7 | providing designation 75B brick work in C.M ( 1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints cost of screening materials rankig out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I B.C.D.S.O.R No 5.2.6 |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) B.C.D.S.O.R No 5.3.10 |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size. B.C.D.S.O.R No 5.3.9.1 |
| 10 | providing and laying damp-proof coarse 50mm thick with cement concrete 1;2:4 (1 cement : 2 coarse sand ( zone -lll ) :4 graded stone aggregate 20mm nominal size ) B.C.D.S.O.R No 5.3.5 |
| 11 | providing designation 75B brick work in Cement Mortar (1:6) in super structure with approved quality of clean coarse sand of F M 2 to 2.5 including providing 10mm thick mortal joints, cost of sceening materials, racking out joints to 15mm depth , curing taxes and royelty all complete of job as per building specification and direction of E/I B.C.D. S.O.R. Item No 5.2.14 |
| 12 | Reinforced cement concre work in beams,suspened floors, roofs having slope up to 15' landing, balconies, shelves, chajjas, lintels,bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level , excluding cost of centring, shuttering, finishing and reinforcement with : 1:1.5.3 (1 cement : 1.5 coars (zone-lll) : 3 graded stone aggregate 20 mm normal size) B.C.D.S.O.R No 5.3.11 |
| 13 | Centering and shuttering including strutting, propping etc. and removal of from for - Foundations,footings, bases of columns etc for mass concrete B.C.D.S.O.R No 5.3.17.1 |
| 14 | Centering and shuttering including strutting, propping etc. and removal of from for Lintels, beams, plinth beams, girders, bressumers and cantilevers. B.C.D.S.O.R No 5.3.17.5 |
| 15 | Centering and shuttering including strutting, propping etc. and removal of from for Columns, pillars, piers, Abutments, posts and struts B.C.D.S.O.R No 5.3.17.6 |
| 16 | Centering and shuttering including strutting, propping etc. and removal of from for Suspendeds, floors, roofs, landings, balconies and access platform B.C.D.S.O.R No 5.3.17.3 |
| 17 | Centering and shuttering including strutting, propping etc. and removal of from for Weather shade, Chajjas, corbels etc., including edges B.C.D.S.O.R No 5.3.17.19 |
| 18 | Centering and shuttering including strutting, propping etc. and removal of from for Stairs, (excluding landings) except spiral-staircases B.C.D.S.O.R No 5.3.17.7 |
| 19 | Providing and fixing fan hook of 16 mm dia TMT M.S bar 1 metre long bent to requred size and shape placed in position and fixed in R.C.C slab/Beam at the time of casting all complete as per specification and direction of E/I.B.C.D.S.O.R No 5.5.13 |
| 20 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) .B.C.D.S.O.R No 5.5.12 |
| 21 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube D.S R 10.26.1 |
| 22 | Providing and fixing 1mm thick M.S. sheet door & window with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces D.S.R 10.5.1 |
| 23 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. 5.5.14 |
| 24 | Providing 12mm cement plaster (1:6) with clean cdarse sand of F M 1.5 including cost of sceening, curing with all leads and lifts of water, scaffolding, taxes and royelty all complete as per building specification and direction E/I B.C.D.S.O.R No 5.7.3 |
| 25 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royelty all complete as per specification and direction of E/I B.C.D.S.O.R No 5.7.2 |
| 26 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. B.C.D.S.O.R No 5.7.11 |
| 27 | Providing 6mm cement plaster (1:4) in ceiling with clean cdarse sand of F M 1.5 including cost of sceening, curing with all leads and lifts of water, scaffolding, taxes and royelty all complete as per building specification and direction E/I B.C.D.S.O.R No 5.7.6 |
| 28 | Providing 12 mm water proof cement plaster ( 1: 3 ) with clean coarse sand of F.M 1.5 with 5% cico any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as specification and direction of E/I B.C.D.S.O.R No 5.7.14 |
| 29 | Providing 12 mm water proof cement plaster ( 1: 3 ) with clean coarse sand of F.M 1.5 with 5% cico any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as specification and direction of E/I B.C.D.S.O.R No 5.7.11 |
| 30 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .B.C.D.S.O.R No 5.6.28 |
| 31 | Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. 600X600 mm Sqm B.C.D.S.O.R No 5.6.20 |
| 32 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade white 15X15cm Tiles. B.C.D.S.O.R No 5.6.23.2 |
| 33 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete D.S.R 11.38 |
| 34 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.B.C.D.S.O.R No 5.3.8 |
| 35 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. B.C.D.S.O.R No 5.10.34 |
| 36 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) B.C.D.S.O.R No 5.5.4 |
| 37 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) } B.C.D.S.O.R No 5.5.5 (a) |
| 38 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) } B.C.D.S.O.R No 5.5.5 (b) |
| 39 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) B.C.D.S.O.R No 5.1.7 |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( D.S.R. 13.80 ) |
| 41 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. B.C.D.S.O.R No 5.8.18 |
| 42 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) ( D.S.R. 13.47.1 ) |
| 43 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D.S.O.R No 5.8.43 |
| 44 | Providing and laying factory made charfered edge cement concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc of required strength, thickness/ shape, made by table vibrator method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of course sand, compacting proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibrator compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping exta sand, all complete as per manufacture's specification & direction of Engineerin-charge .80mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern. D.R.S 16.91.2 |
| 45 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. D.S.R. 10.25.1 |
| 46 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 47 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I.(i) Cement |
| 48 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (ii) Sand |
| 49 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I.(iii) Stone Chips |
| 50 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (iv) Stone Dust |
| 51 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (v) Steel |
| 52 | Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I (vi).Bricks |
| 53 | Point wiring in PVC consuit, with piano type switch -Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as requiredGroup C |
| 54 | Point wiring in PVC consuit, with piano type switch -Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as requiredGroup A |
| 55 | Power plug wiring in PVC conduit (2 x 4 sq.mm) - Wiring for light/power plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 56 | Circuit/submain wiring in PVC conduit - Wiring for Circuit/submain wiring along with earth wire the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 57 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire |
| 58 | 2x6 Sqmm + 1x6 sq mm earth wire |
| 59 | 2 x 6.0 sq.mm + 1 x 6.0 sq.mm earth wire |
| 60 | S/F piano type switch/socket - Supplying and fixing following piano tyep switch/socket on the existing switch box/cover including connections etc. as required.5/6 amps, one way switch |
| 61 | 3 pin 5/6 amps, socket outlet |
| 62 | Electronic step fan regulator, deluxe |
| 63 | S/F light plug point with piano type accessories - Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 5 pin, 5/6 amps socket outlet and 5/6 amps piano tyep switch connection, painting etc. as required. |
| 64 | S/F light plug point with piano type accessories - Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 5 pin, 5/6 amps socket outlet and 5/6 amps piano tyep switch connection, painting etc. as required. |
| 65 | S/F ceiling rose - Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/wooden block including connection etc. as required. |
| 66 | S/F Batten holder - Supplying and fixing batten/angle holder including connection etc. as required. |
| 67 | S/F rewireable double pole/TP&N switch disconnector - Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as required.63 amps, double pole |
| 68 | S/F S.P. MCB DB - Supplying and fixing following way single pole netural, sheet, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)8 way, Double door |
| 69 | S/F 'B' series, S.P. MCB -Supplying and fixing 6 amps to rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required6/32 amps, single pole \\"B\\" series |
| 70 | Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 71 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 72 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 73 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 74 | P/F G.I. lightning condutor finial :-Providing and fixing of lighting conductor finial , made of 25mm dia 300mm long , G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required. |
| 75 | Reverting, sweating and soldering lightning conductor tape :-Reverting , sweating and soldering of copper / G.I. tape (with another copper / G.I. tape , base of the finial or any other metallic object ) as required. |
| 76 | P/F G.I. lightning conductor tape in horizontal run :-Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Horizontal run ). |
| 77 | P/F G.I. lightning conductor tape in vertical run :-Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Vertical run ). |
| 78 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 79 | Supply, Installation, testing and commissioning of following, size ceiling fan 3 Blades confirming to IS : 374 : 2019 including wiring the down rods of standard length (up to 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.1200mm (48\\") BLDC 5star rating 32W Ceiling Fan |
| 80 | S.I.T.C. of following rating, surface mounted LED light fitting, suitable for 230V 50Hz, single phase supply etc. complete as required.20/22W LED Tube Light |
| 81 | Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab 16Sq.mm, 2 core |
| 82 | Wiring in existing conduit - Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.3x1.5 sq mm |
| 83 | Wiring in existing conduit - Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.3x2.5 sq mm |
| 84 | S/F PVC /G.I. boxes - Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc. as required.72mm x 146mm x 48mm deep/(4\\" x 7\\") |
| 85 | 147mm x 93mm x 47mm deep/(5\\" x 7\\") |
| 86 | 72mm x 226mm x 48mm deep/(4\\" x 10\\") |
| 87 | 15/16 amps, one way switch |
| 88 | 6 pin15/16 amps, socket outlet |
| 89 | Electronic step fan regulator, mini |
| 90 | ITC fluorescent fitting directly on surface - Installtion, testing and commissioning of Pre-wired, fluorescent fitting/compact fluorescent fitting of all type, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq.mm. FR PVC insulated, copper conduit. |
| 91 | S/F rewireable double pole/TP&N switch disconnector - Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as required.32 amps, double pole |
| 92 | S/F S.P. MCB DB - Supplying and fixing following way single pole netural, sheet, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)8 way, Single door |
| 93 | 9/10Watt LED Bulb |
| 94 | S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required40 amps |
| 95 | 15/16 Watt LED Bulb |
| 96 | 12\\" (300mm) metal exhaust fan |
| 97 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complere as per specification and direction of E/I. |
| 98 | Providing and fixing Gun metal full way valve of approved quality all complete as per specification and direction of E/I.25mm dia |
| 99 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.125mm thick wall |
| 100 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.250mm thick wall |
| 101 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.C.P. brass soap dish container medium quality with screw and hinges etc. |
| 102 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I.580mm long - With 10 liter low level PVC cistern |
| 103 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of Hindustan 'Parry' or any other approved I.S.S. make with 5 litres capacity C.i. automatic flusing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm PVC/Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including priming coat of red oxide, cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.Flat back or standard corner (600mm x 350mm) |
| 104 | Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindl stop cock approved quality of weight not less than 30 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 105 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.For classification of soil item - A- 20x0.30x0.50 |
| 106 | Lbour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I.150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L. |
| 107 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 108 | Supplying and fixing NP2 Hume pipe etc. (150mm dia) |
| 109 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes75 mm |
| 110 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes110 mm |
| 111 | Single tee with door - 75x75x75 mm |
| 112 | Single tee with door - 110x110x110 mm |
| 113 | Single tee without door - 75x75x75 mm |
| 114 | Single tee without door - 110x110x110 mm |
| 115 | Bend 87.5° - 75mm |
| 116 | Bend 87.5° - 110mm |
| 117 | Shoe - 110mm |
| 118 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall25 mm nominal outer dia Pipes |
| 119 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes |
| 120 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes |
| 121 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 122 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 |
| 123 | Add-G.S.T ( Good & Service Tax ) |
| 124 | Add- Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender