Tender for Tender for Fencing Material Purchase Purchase Of Fencing Material (Rcc Pole)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
3.75 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chhindwara → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fencing Material Purchase Purchase Of Fencing Material (Rcc Pole)
BOQ
| Sl. No. | Item Description |
| 1 | FENCING MATERIAL RCC Pole |
| 2 | RCC Fencing Pole Height – 2 .0 MType – StraightLength – 2.00 M, Dimensions – Bottom 10 x 10 cm square, Top 8x8 cm squareCement Concrete Mix – Cement Sand and metal 1:2:4 with 12.5 nominal size coarse aggregate. Sand used should be free from clay and salt. Concrete mix shall be conforming to grade M-15 of IS :456:2000Reinforcement – 4 round vertical bars of 6 mm diameter 11 nos of stirrups of 6 mm diameter round MS Bar 20 cm centre to centreHooks – 5 no, bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.Manufacturing – In order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm. |
| 3 | RCC Fencing Pole Height – 2.45 MType – StraightLength – 2.45 M, Dimensions – Bottom 10 x 10 cm square, Top 8x8 cm square.Cement Concrete Mix – Cement Sand and metal 1:2:4 with 12.5 nominal size coarse aggregate. Sand used should be free from clay and salt. Concrete mix shall be conforming to grade M-15 Reinforcement – 4 round vertical bars of 6 mm diameter 13 nos of stirrups of 6 mm diameter round MS Bar 25 cm centre to centreHooks – 7 no, Top hook should be provided 100 cm below the top of poles, and bottom hook should be provided 500 cm above the bottom of poles. The central distance between the top and bottom hooks shall be equally divided to fix remining hooks. Manufacturing- in order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators, Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5cm |
| 4 | PRCC Fencing Pole Height – 2.0 MEach fencing pole shall be of square cross-section measuring 100mmx100mm.The pole shall contain 4 Nos. vertical reinforcements mode of 4 mm diameter high tensile steel wire. Each2.4 Meter fencing pole shall be provided with 7 Nos. Holes.The top hole shall be provided at 100 mm below the top of the pole. The bottom hole shall be provided at 500 mm above the bottom of the pole. The center to center distance between the top and bottom holes shall be equally divided for the remining holes. 'J' hooks shall be made of 6 mm diameter MS bars with proper threading at one end, along with nut and washer for tightening purpose.The 'J' bolts/hooks shall pass through the holes provided in the fencing poles. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender