Supply Of Furniture Items For The Staff Of Secretary Rvpn And Cpo Rvpn At Vidyut Bhawan Jaipur

Sharing tender

Supply Of Furniture Items For The Staff Of Secretary Rvpn And Cpo Rvpn At Vidyut Bhawan Jaipur--1 Supply Of Visitor Cushioned Chair With Seat/Back Made Up Of Dimensions 50.0 Cm (W) X 45.0 Cm (H) (Approx.) And Overall Height Of Chair 80.0 Cm (Approx.) With A Seat Height Of 45.0 Cm (Approx.) ; Overall Width And Depth Of Chair From Pedestal 55.0 Cm (W) X61.0 Cm(D)(Approx) Upsholstered With Fabric High Resilende Polystyrene From Armrestes And Tubular Frame. For Office Of Sect Office- 30 30.00 Each 2 Providing & Fixing Of Manager Table With Pedestal Of Size 1350 X 750 X 750 Mm With 25 Mm Thick Top Prelaminated With Mdf Board & Rest Structure & Side Unit With 18 Mm Thick Prelaminated Mdf Board With 1 Mm Thick Pvc Edge Beading Finish Along With Three Drawers Running On Tc Channel Sect -6 6.00 Each 3 Supply Of Executive High Back Revolving Chair-: The Seat And Back Shall Be Made Up Of 1.2+0.1Cm. Thick Hot Pressed Plywood Measured As Per Qa Method Described In Ocр-Lta 4- 18 And Shall Bè Upholstered With Fabric And Mounded Polyurethane Foam With Pvc Lipping All Round. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of The Back Shall Be 19.0Cm(W) X71.0Cm And Of Seat Shall Be 19.0Cm(W) X44.0Cm (D). The Hr.Polyurethane Foam Shall Be Moulded With Density = 45+- 2Kg/M3 And Hardness Load 16+2Kgf As Per Is:7888 For 25% Compression The Armrest Tops Shall Be Injection Moulded Form Black Polypropylene. They Shall Be Fitted To Tubular Armrest Supports Made Of Dia 2.54+0.03Cmx0.16+0.0128Cm Thk.M.S. E.R.W. Tube And Black Powder Coated (Dft 40-60Microns) The Tubular Armrest Supports Should Hold Together The Seat And Back. The Mechanism Shall Be Designed With 360 Revolving Type 1R+2 Maximum Tilt On Plvot, At Center, Upright Position Locking, Tilt Tension Adjustment. The Pedestal Shall Be Fabricated From 0.2+0.02Cm Thick Hr Sheet (Is:Dd 1079/Hr) Powder Coated (Dft 40- 60Microns) And Fitted With And Injection Moulded Black Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded Black Polypropylene The Hub Cap And 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 60.0+45Cm Pitch -Center Dia (70.0+1.0Cm With Castors) The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height Min 42.4 To Max 53.4Vm Hight Min102.4 To Max 113.4Cm Width & Depth Of Chair As Measured Form Pedestal . Widht 70.0Cm And Depth 70.0Cm Cpo -2 2.00 Each 4 Supply Of Executive High Back Revolving Chair - The Seat And Back Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14- 18 And Shall Be Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of The Back Shall Be 49.0 Cm. (W) X 71.0 Cm And Of Seat Shall Be 49.0 Cm. (W) X 44.0 Cm. (D). The Hr Polyurethane Foam Shall Be Moulded With Density= 45 ±2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Armrest Tops Shall Be Injection Moulded From Black Polypropylene. They Shall Be Fitted To Tubular Armrest Supports Made Of Dia 2.54 ±0.03Cm. X 0.16 ±0.0128Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ). The Tubular Armrest Supports Should Hold Together The Seat And Back. The Mechanism Shall Be Designed With 360° Revolving Type, 1R ±2° Maximum Tilt On Pivot At Center, Upright Position Locking, Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hrsheet (Is :Dd 1079/ Hr ), Powder Coated .(Dft 40-60 Microns ) And Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 60.0 ±0.5Cm. Pitch-Centre Dia. (70.0 ±1.0 Cm. With Castors).The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 42.4 To Max 53.4Cm, Height - Min102.4 To Max 113.4Cm, Width & Depth Of Chair As Measured From Pedestal - Width-70.0 Cm And Depth-70.0 Cm. Or Office Of Sect= 6 (Cpo- 15 5 Supply Of Executive Medium Back Chair With Seat/Back Made Of Dimensions 50.0 Cm (W) X 45.0 Cm(H) (Approx.) And Overall Height Of Chair 90.0 Cm (Approx.) With A Seat Height Of 55.0 Cm (Approx.) ; Overall Width & Depth Of Chair From Pedestal 70.0 Cm (W) X 70.0 Cm (D) (Approx.) ; Upholstered With Fabric, High Resilience Polyurethane Foam Armrests And Tubular Frame; Center Tilt Mechanism, 360 Degree Revolving Mechanism, 17 + /- 2 Deg Tilt On Pivot At Center, Upright Position Locking. Tilt Tension Adjustment Pneumatic Height Adjustment, Telescopic Bellow Assemble, Pedestal Assembly With Twin Wheel Castors Of Standard Make.1079/ Hr ), Powder Coated .(Dft 40-60 Microns ) And Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 60.0 ±0.5Cm. Pitch-Centre Dia. (70.0 ±1.0 Cm. With Castors).The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 42.4 To Max 53.4Cm, Height - Min102.4 To Max 113.4Cm, Width & Depth Of Chair As Measured From Pedestal - Width-70.0 Cm And Depth-70.0 Cm. (Cpo -44) 44.00 Each 6 Supply Of Steel Almirah With Spray Paint Finish With 2 Steel Doors, 3 Way Bolting System Having A Rigid 7 Lever Unpickable Lock With Duplicate Cp Key Doors & Shelves Made Out Of 20 Gauge Sheet & Rest Body Made Out Of 22 Gauge Sheet Size 50”X36”X19”(Including 5“ Bottom Support In Over All Height) With Three Fix Shelves So As To Make Four Compartment. Sect -4, Cs-4 8.00 Each 7 Supply Of Wooden Side Rack Of Size 1200X750X450Mm Fitted With 3Nos Wooden Self-Having 18Mdf Board, Rubber Stopper -At Bottom At Three Side Covered 2Mm Pvc Bidding & Fronts Side Door With Handle Sect-6