Tender For Comprehensive Misc Repairs To Otm Accn Of Tpt And Msl And Ge Banar Under Ge Banar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Misc Repairs To Otm Accn Of Tpt And Msl And Ge Banar Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 2 | M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. |
| 3 | M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces complete all as specified. |
| 4 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified. |
| 5 | Material and labour for 15mm thick rendering in two layer, 5mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr complete all as specified.Note:- WPC shall be measured and paid separately. |
| 6 | Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified. |
| 7 | M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified. |
| 8 | M&L for two coats of cement base paint on old plastered/pointed surfaces of walls including necessary preparation of surfaces complete all as specified. |
| 9 | M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified. |
| 10 | M&L for 10 mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 12 | M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed. |
| 13 | Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified. |
| 14 | M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified. |
| 15 | M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified. |
| 16 | M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified. |
| 17 | M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified. |
| 18 | M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site complete all as specified. |
| 19 | M&L for providing steel scafolding & formwork etc for supporting RCC Slabs etc for carrying out the rehabilitation works complete all as specified.Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal. |
| 20 | M&L for providing steel scafolding & formwork etc for supporting RCC Beams etc for carrying out the rehabilitation works complete all as specified & directed . Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal. |
| 21 | Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 22 | Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified. |
| 23 | M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified. |
| 24 | M&L for square rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified. |
| 25 | All as per item No. 24 but except stone. |
| 26 | Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified. |
| 27 | Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 28 | M&L for coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified. |
| 29 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified. |
| 30 | M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor finish complete all as specified. |
| 31 | M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurr and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 32 | All as per item No 31 but as in skirting incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 33 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 34 | All as per item No 33 above but as in skirting incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 35 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 36 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified. |
| 37 | M&L 18/20mm thick any shade marble (Green marble) slab in cooking platform/partion and the like, set in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade 15 mm thick screed bed in CM 1:6 completed all as specified |
| 38 | M&L 20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including moulding (U type) on edges in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 39 | M&L for 40mm thick PCC 1:2:4, Type B-0 using 20mm graded aggregates as in floor, hard standing flooring finished even and smooth without using extra cement complete all as specified. |
| 40 | M&L for 20-25mm thick machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified. |
| 41 | M&L machine cut Kota stone 16-18 mm thick in riser of steps, skirting dado and pillar laid over 10 mm thick screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) complete all as specified. |
| 42 | Cleaning and removing all scale and dirt, etc, from tanks exc 250 but n exc 500 liter cacpacity and from mouths of circulating pipes, through joot/cotton bags and also wash by bleaching powder as approved complete all as specified. |
| 43 | Cleaning and removing all scale and dirt, etc, from tanks exc 500 but n exc 1000 liter cacpacity and from mouths of circulating pipes, through joot/cotton bags and also wash by bleaching powder as approved complete all as specified. |
| 44 | S&F ISI marked 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified. |
| 45 | S&F ISI marked 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified. |
| 46 | S&F in repair Tank cover for 500 liter /1000 liter water storage tank complete all as specified. |
| 47 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 48 | S&F in repair Bib taps for 15mm bore dia pipe, cast copper alloy cromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 49 | M & L in repair 15 mm stop valve (concealed cromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions and fixed complete all as specified. |
| 50 | M & L in repair 20 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified. |
| 51 | M & L in repair 25 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified. |
| 52 | S &F in repairs 15mm bore stop/angle valve of copper alloy, CP with flange complete all as specified. |
| 53 | S &F in repairs Pillar taps(long nose), cast copper alloy chromium plated 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 54 | S &F in repairs Central hole basin mixture cast copper alloy chromium plated fancy type 15 mm bore all as specified & directed. |
| 55 | S &F in repairs Mixing valve (wall Mixer) 3 in 1 with flexible tube & hand shower complete chromium plated fancy type 15 mm bore complete all as specified. |
| 56 | S &F in repairs PVC connection 15 mm bore of length 450 mm complete all as specified. |
| 57 | S &F in repairs PVC connection 15 mm bore of length 600 mm complete all as specified. |
| 58 | S&F in repair PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr complete all as specified. |
| 59 | S &F in repairs PVC flushing cistern 10 Ltr Capacity including Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified. |
| 60 | S &F in repairs CP waste coupling 40 mm size with rubber gasket etc for SS sink complete all as specifeied |
| 61 | S &F in repairs CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specifeied |
| 62 | S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified. |
| 63 | S&F in repair stainless steel towel ring complete all as specified. |
| 64 | S&F looking mirror (borderless) fancy type fixed with suitable number of stainless steel cup screws (Minimum 4 Nos) complete all as spefified. |
| 65 | S&F in repair stainless steel shop dish size 160x 160x90mm complete all as specified. |
| 66 | S &F in repairs PTMT body Ball cock /Float Valve 15 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified . |
| 67 | S &F in repairs PTMT body Ball cock /Float Valve 20 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified . |
| 68 | S &F in repairs HDPE flush pipe 32 mm dia of flush cistern to WC complete all as specified. |
| 69 | S &F in repairs GI Nipple 20 mm bore 75mm long for tank connection complete all as specified. |
| 70 | S &F in repairs GI Nipple 25 mm bore 75mm long for tank connection complete all as specified. |
| 71 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 72 | S &F in repairs mild steel Cromium Plated hygeine wash Jet spray assembly with 1200 mm long flexible tube complete all as specified. |
| 73 | S &F in repairs 15 mm bore angle cock, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. |
| 74 | S &F in repairs 15 mm bore bib taps, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. |
| 75 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass 5.5 mm thick, mounted on 6mm thick AC/PVC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 76 | S &F in repairs SS chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as per sample |
| 77 | S &F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as per sample |
| 78 | S &F in repairs Sheet glass shelf assembly consisting of 6-8 mm thick sheet glass shelf 10-15cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 79 | S &F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 80 | S &F in repairs 125mm dia CP Grating with or without hole (for waste Pipe) complete all as specified. |
| 81 | S &F in repairs Vitreous China wash hand basin size 550x400 mm size with pedestal with a pair of brackets, waste pipe, waste coupling complete all as specified. |
| 82 | S & F in repair Vitreous china premium/1st quality wash basin (under counter/counter top), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.Note : The items for counter will be measured and paid separately. |
| 83 | S &F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests complete all as specified. |
| 84 | S &F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified. |
| 85 | S&F as in repairs stainless steel plate rack of size 30\\"x24\\"x10\\" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample . |
| 86 | S&F in repair Decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample superior quality complete and incl brackets and Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for holding & end cover complete all as specified and as directed |
| 87 | S&F in repairs PVC Cabinet mirror of size ( 355mmx 455mm ) of selected quality glass and fixed to plugs with chromium plated brass screws and cup washers complete all as specified. |
| 88 | S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 89 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 90 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 91 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 92 | S &F 15 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified. |
| 93 | S&F 20 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified. |
| 94 | S & F 25 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified. |
| 95 | Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 96 | Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 97 | Refixing 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 98 | S &F in repairs sink cock , cast copper alloy cromium plated for 15 mm bore pipe complete all as specified. |
| 99 | S&F in repairs vitreous china wash down water closet (Pedestal pattern EWC) one piece, coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified. |
| 100 | S&F in repairs vitreous china wash down water closet EWC, floor mounted coupled with closet, including connection to drain (or outgoing pipe), including WC seat cover closed pattern with flat bottom and necessary fittings complete all as specified. |
| 101 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 102 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 103 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 104 | Dismantaling cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified. |
| 105 | M&L for 35 mm thick pre-cast cement concrete louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding and set in cement mortar 1:4 complete all as specified. |
| 106 | Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area n. exc 1.5sqm each complete all as specified. |
| 107 | Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5sqm but not exc. 4 Sqm each complete all as specified. |
| 108 | Taking down steel windows / ventilator with frame of any description and any size complete |
| 109 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 110 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 111 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., Fe 410-W (Gde E-250) quality-A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 112 | S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,Both face is covered with decorative face veneer with lipping/frame to match complete all as specified. |
| 113 | S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete. |
| 114 | Framed work such as grills, gratings, cooler stand etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 115 | S & F galvanised MS wire cloth 0.56 mm nominal dia of wire & 1.18 mm average width of apperture fixed complete all as specified. |
| 116 | S&F in repairs galvanised ms wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete all as specified. |
| 117 | S&F 100mm size SS butt hinges (ISI Marked) complete all as specified. |
| 118 | S&F 300mm long Mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on tapple plate and fixed complete all as specified. |
| 119 | S&F 200mm MS barral tower bolts stove enamelled black with bright bolt and fixed complete all as specified. |
| 120 | S&F in repairs 200mm MS barral tower bolts stove enamelled black with bright bolt and fixed complete all as specified. |
| 121 | S&F 150mm MS pressed handle oval type stove enamelled black |
| 122 | S&F in repairs, 150mm MS pressed handle oval type stove enamelled black complete all as specified. |
| 123 | S&F in repairs 140 mm size best quality Floor door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe all as per sample complete all as specified. |
| 124 | M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 125 | M&L Preparation of old wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 126 | S&F solar control film of 25 micron reflective type sticked with glass as per manufacturer instuction in any size in each pane complete all as specified. |
| 127 | Supply and fixing in repairs Aluminium Anodised extruded section ISI Marked tower bolt of size 200 mm complete all as specified. |
| 128 | Supply and fixing in repairs Anodised aluminium extruded section ISI marked door handles size 150 mm complete all as specified. |
| 129 | S& F in repairs MS sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a mini of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified. |
| 130 | S & F in repairs mild steel 300mm ordinary rat tail rod pattern spring incl roller and roller plat complete all as specified. |
| 131 | Supply and fixing in repairs Mild Steel Butt hinges medium weight cold rolled 100mm size complete all as specified. |
| 132 | S&F in repairs Stainless Steel medium weight 100mm size Butt hinges complete all as specified. |
| 133 | S&F in repair cast iron body door closer hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 134 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified. |
| 135 | S & F in repairs 40mm dia cupboard knobs fixed the screw and washer of MS bright finished complete all as specified. |
| 136 | S & F in repairs Mild steel body peg stays 250 mm long (minimum) to steel windows & vents complete all as specified. |
| 137 | S & F in repairs Mild steel body window handles (Left or right) any size to steel windows & vents complete all as specified. |
| 138 | S & F in repairs Door seal as per trade pattern with powder coated aluminium strip 25-30 mm width length having suitable dia holes (for fixing screws) & synthetic strip at bottom to avoid entry of dust etc fixed complete all as specified. |
| 139 | Hacking out old broken glass any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing complete all as specified. |
| 140 | S & F 3mm thick Plain sheet glass panes cut to size required n exc 0.50 sqm each complete all as specified. |
| 141 | S & F 4mm thick figured glass pin headed type n exc 0.50 sqm each complete all as specified. |
| 142 | Supply & fix continuous paino hinges 40 mm width of flap mild steel body electro galvanised finish complete all as specified. |
| 143 | S&F of 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified. |
| 144 | Resucuring /easing and adjusting shutters without taking down of any description and in any position area exc 1 sqm but n exc 2 sqm complete all as specified. |
| 145 | Resucuring /easing and adjusting to steel windows / vents incl necessary welding rivetting etc complete all as specified. |
| 146 | S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (min thickness of powder coating 50 micron) |
| 147 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. (min thickness of powder coating 50 micron) |
| 148 | S&F power coated Anodised aluminium window and ventilator shutters(Thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 149 | S&F 5.5mm thick Sheet glass ordinary quality glass and glazing in any size in each pane complete all as specified. |
| 150 | S&F Anodised aluminium powder coated decogrill for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 151 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 152 | S&F in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified. |
| 153 | Repairs to joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified. Please Enable Macros to View BoQ information |
| 154 | Repairs to joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender