Tender For Special Repair To Certain Md Accn At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
Tender Value
47.57 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
17 days left
EMD
95140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Md Accn At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling or stone flooring including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete unreinforced in ground floors and pavings not exc 15cm thickness below or above ground level etc, complete all as specified and directed. |
| 3 | M&L for coloured printed non skid tiles area of each tile exceeding exc 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor, and including 15 mm thick screed bed cement mortar in CM 1:4 and including the chipping of the existing PCC floor, complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for first quality glazed ceramic coloured tiles of (300 x 450) x 7mm thick (Shade and colour as approved by GE) laid on vertical surface such as skirting, dadosand risers to steps etc laid over and incl 10 mm thick cement plaster in CM 1: 4, set and joint in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed. |
| 5 | M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and incl 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 6 | M&L for 600mm x 600mm x 10mm thick coloured vetrified light shade tiles shade as approved flooring (in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor, complete all as specified and directed. |
| 7 | M&L for 600mm x 600mm x 10mm thick coloured vetrified light shade tiles shade as approved (in any pattern) in vertical surfaces as skirting and jointed with neat cement slurry over fixed to wall as skirting with 10 mm thik cement sand mortar in CM 1: 4 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed. |
| 8 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg 40mm thick, complete all as specified and directed. |
| 9 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection, complete all as specified and directed. |
| 10 | Taking down existing water proofing treament any nos of layers and of any description, incl demolition and taking off PCC padding/plaster on RCC slab, also including removing of bitument coating to show the concrete surface to its true colour and roughening etc and also removing the debris outside the MOD land, complete all as specified and directed. |
| 11 | Taking down existing mud puska any nos of layers and of any description, including removing of the debris outside from MOD Land up to distance 250 mtr, complete all as specified and directed. |
| 12 | Cutting out cracks to V-Section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 including macthing existing surfaces, complete all as specified and directed. |
| 13 | M&L for cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) on roof padding,coping and ect. finished even and fair complete all as specified and directed. |
| 14 | M&L for 15 mm thick screed bed in cement mortar 1:3 mixed with integral water proofing compound @ 3% by weight of cement, complete all as specified and directed. |
| 15 | M&L for laying APP modified membarane with non woven polyester reinforcement mat (concrete core) not less than 3 mm thick & not less than 3.5 kg /sqm, the over the lap otching shall be 100 mm on length side & 100 mm on width side over a tack coat of Industrial bitumen of 1.20 kg/Sqm over Bituminious based primer IS No. 3383 @ 250 gms/sqm including apply of Aluminium colour synthetic enamel paint @ 200 gms/sqm all as per manufacture's instruction, complete all as specified and directed.Note: Supply only integral water proofing compound shall be measured and paid separately. |
| 16 | Supply only integral water proofing liquid ( ISI marked) complete all as specified and directed. |
| 17 | Demolition of brick work built in cement mortar of any description, complete all as specified and directed. |
| 18 | M&L for brick work with sub class 'B' Bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 as in manholes and drain, complete all as specified and directed. |
| 19 | Dimolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 20 | M&L for RCC 1:2:4 B0 (using of 12.5 mm Stone Aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and chajjas, complete all as specified and directed. |
| 21 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed. |
| 22 | M&L for 10 mm dia and over TMT bar cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire n.exc 0.9mm or with securing clips etc, complete all as specified and directed. |
| 23 | Taking down cement plaster from brick or stone masonry or concrete surfaces and hacking for key and scrubbing down with water etc., complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick on fair faces of brick work or concrete sur faces in CM 1:4 other than fair face of brick works etc or similar surfaces etc including mixing with water proofing qty as per manufactrer instruction complete all as specified and directed. Note: Supply only integral water proofing compound shall be measured and paid separately. |
| 25 | M&L for 15 mm thick rendering in cm 1:6 on brick surfaces or concrete surfaces finished even and smooth without using extra cement, comlete all as specified and directed. |
| 26 | M&L for rendering 10mm thick in CM 1:3 on concrete surface in ceilings etc, complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint on walls over two coat (3 mm thick) wall care putty, complete all as specified and directed. |
| 28 | M&L for preparation of new wall surface and applying two coat of oil bound distemper over two coat (3 mm thick) wall care putty on new plastered surfaces complete all as specified and directed. |
| 29 | M&L for preparation of new wall surface and applying three coat of white wash on on ceiling, complete all as specified and directed. |
| 30 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of oil bound distemper on walls over two coat (3 mm thick) wall care putty, complete all as specified and directed. Note - work shall be got executed through skilled representative of manufacture company. |
| 31 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of exterior emlsion paint on walls over two coat (3 mm thick) wall care putty, complete all as specified and directed. Note - work shall be got executed through skilled representative of manufacture company. |
| 32 | M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash on walls, complete all as specified and directed. |
| 33 | All as per item No 32 above but on ceiling. |
| 34 | M&L for precast cement concrete type-B1 1:2:4 by using 20 mm graded crushed broken stone aggregate, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings set in cement mortar 1:4, complete all as specified and directed. |
| 35 | Taking down chowkats or frame n.exc. 1.50 sqm each with shutters (with out taking off shutter from the frame) and removing from the site, complete all as specified and directed. |
| 36 | All as per per item No 35 above but exc 1.50 sqm and n.exc 4.00 sqm each (with out taking off shutter from the frame) and removing from the site. |
| 37 | S&F in repair Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing, complete all as specified and directed. Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 38 | S&F in repair Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 39 | M&L for pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 40 | M&L for pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 41 | S&F for factory made, 30 mm thick flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thick ness of lipping shall be 12mm for sides on which hinges are to be provided, complete all as specified and directed. |
| 42 | S&F for 35 mm thick factory made second class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in IS-1003 supplied and fitted to the chowkats, complete all as specified and directed. |
| 43 | S&F for ECO 2000 series Approx size of 0.90m x 1.20m (Elixir/NCL SECCOLOR) Roll framed galvanised pre painted steel section windows/ventilators including provision of grills, 5 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, PALAM sheet no -1/2 and 2/2 of drawing no-CEAF/STD-191/2014 etc complete all as specified and directed by Engineer-in-Charge.(a) Fixing details:- frame and shutter frame sections should be cut to lenth and miter joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer (EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used aroud the fly mesh to fix mesh in mesh shutter.(b) Accessories:- Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter(c) Glass shutters having fixed glass shall be 5 mm thick orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 fo ST Gobin, HNG OR MODIGUARD(d) Windows should be provided with grill made of 10mm SQR. MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.(e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames.(f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr inch. |
| 44 | S&F in repair framed work as in doors, for door frames or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, Fe-410-W (Gde E-420) quality, complete all as specified and directed. |
| 45 | S&F for Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe-290 Gde- E-165, complete all as specified and directed. |
| 46 | S&F for powder coated aluminium frame for doors windows, ventilators and partition with one or more rebates including joining cleat for fixing and suitable aluminium powder soaed handles, tower bolts and door stopers incl fixing to door with suitable screws/fastners etc. complete all as specified and directed. |
| 47 | S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 48 | S&F in repair sheet glass 4 mm thick ordinary quality and fixed with oil putty / wooden beads in square n.exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 49 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed, complete all as specified and directed. |
| 50 | S&F for aluminium anodized barrel tower bolts of extruded section 150 mm long, complete all as specified and directed. |
| 51 | S&F in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 52 | S&F for butt hinges medium weight cold rolled mild steel 100 mm size, complete all as specified and directed. |
| 53 | S&F for aluminium handles cast type anodized of 150 mm size, complete all as specified and directed. |
| 54 | S&F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 55 | M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth, complete all as specified and directed. |
| 56 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint on steel surface over 10 cm in width or girth, complete all as specified and directed. |
| 58 | M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 59 | Taking up or down steel water tubing and connection incl cleaning for refixing or removal to stores for following bore complete all as specified and directed :- |
| 60 | All as per item No 59 above 15mm dia |
| 61 | All as per item No 59 above 20mm dia |
| 62 | S&F GI tubes medium grade with all fitting and fixed concealed complete to walls and ceiling or laid in floor in following bore of tube complete all as specified and directed:- |
| 63 | All as per item No 62 above 15mm dia |
| 64 | All as per item No 62 above 20mm dia |
| 65 | S&F in repair 20 MM Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair and complete all as specified and directed. |
| 66 | S&F in repair 15 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair and complete all as specified and directed. |
| 67 | S&F sinks in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 68 | S&F in repair vetrious china wash hand basin, white flate back size 550 mm x 400 mm including cutting for and pinning in ends of barakets or erecting stand, complete all as specified and directed. |
| 69 | S&F in repair brass CP waste coupling (half or full threaded) of 32 mm size, complete all as specified and directed. |
| 70 | S&F PVC connection 15 mm bore 450 mm in length, complete all as specified and directed. |
| 71 | S&F in repair brass CP soap dish of approved quality, complete all as specified and directed. |
| 72 | S&F in repair brass CP tower rail, 600mm long of consisting three rod, brackets, complete all as specified and directed. |
| 73 | S&F in repair PVC 110 mm (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps and for sewage line complete all as specified and directed. |
| 74 | S&F in repair PVC 75 mm (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps and for sewage line complete all as specified and directed. |
| 75 | S&F in repair PVC 110 mm (SWR) bends any radius, complete all as specified and directed. |
| 76 | S&F in repair PVC 75 mm (SWR) bends any radius, complete all as specified and directed. |
| 77 | S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 75 mm, complete all as specified and directed. |
| 78 | S&F rotational moulded polyethylene water storage tanks tripple layered (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and directed as per SSR Pt- I, complete all as specified and directed. |
| 79 | S&F in repairs 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make, complete all as specified and directed. |
| 80 | S&F 15mm bore fancy type chromoum plated bib taps, long body, cast copper alloy with fancy type handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 81 | S&F 15mm bore fancy type chromoum plated bib taps, cast copper alloy with fancy type handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 82 | S&F in repair 15mm chromium plated swivel shower rose with or without swivel joints sny size for fixing with 15 mm pipe incl shower arm 15 mm size, 195 mm long with bend of 45 degree, complete all as specified and directed. |
| 83 | S&F in repair Brass CP centre hole basin mixer for mixing hot & cold water, screwed down for iron pipe and fixed, complete all as specified and directed. |
| 84 | S&F in repair Brass CP Wall mixer for mixing hot & cold water, screwed down for iron pipe and fixed, complete all as specified and directed. |
| 85 | S&F in repair 10 Litre PVC low level flushing cistern complete with syphonic action type, white, with inlet, ball valve, float and handle connecting to ITWC/ETWC and fixing on walls with brackets, complete all as specified and directed. |
| 86 | S&F in repairs for Vitreous China squatting pan,\\"Orissa\\" pattern,size 580 x 440 mm white,withintegral foot rests (excluding flushing cistern and flush pipe) including connection to flushing pipe anti syphonage pipe etc, complete all as specified and directed. |
| 87 | S&F in repair to looking mirror 600x450mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws, complete all as specified and directed. |
| 88 | S&F in repair Curtain rod Stainless steel 25 mm dia 1mm thick with pairs of fixing fancy type brackets heavy grade, fancy type supporting stops heavy grade including screws with required accessories and finishing the surface with existing wall surface etc, complete all as specified and directed. |
| 89 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 90 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, , suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed. Note- Switch and sockets will be measured and paid seperately. |
| 91 | All as per item No 90 above but for one light point/fan point controlled by one SP switch |
| 92 | All as per item No 90 above but for one bell point controlled by one No bell push |
| 93 | All as per item No 90 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size. |
| 94 | All as per item No 90 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size. |
| 95 | All as per item No 90 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size. |
| 96 | All as per item No 90 above but with 4.0 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 4.0 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -695 FR LS cable for continuous earth wire required size. |
| 97 | S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed. |
| 98 | S&F socket outlet flush type 3 pin 6 amps suitable for 240 volt AC complete all as specified and directed. |
| 99 | S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed. |
| 100 | S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC complete all as specified and directed. |
| 101 | S&F stepped type electronic fan regulator flush type 230 volts,AC complete all as specified and directed. |
| 102 | S&F bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed. |
| 103 | S&F ding dong bell AC 230 volt single pole complete all as specified and directed |
| 104 | Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed. |
| 105 | Taking down old unsv VTPN DB of any size, complete all as specified and directed. |
| 106 | S&F Vertical type load line distribution board, double door, 8 way, AC ,3 Phase, 415 volts ,TPN, bus bar 200 Amps, rating and earth bus & din rail suitable for MCCB ,IP 43 , metal door complete all as specified and directed. |
| 107 | S&F MCCB, 3 pole,160A ,10KA complete all as specified and directed. |
| 108 | Taking down old unsv MCB SPN DB of any size, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 109 | Taking down old unsv MCB SPN DB of any size, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender