Tender For Repairs To Certain Misc Wooden And Steel Furniture Items At Bso (N) Under Ge (N) Secunderabad.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
secunderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Certain Misc Wooden And Steel Furniture Items At Bso (N) Under Ge (N) Secunderabad.
BOQ
| Sl. No. | Item Description |
| 1 | BOOK CASE: FD-237:Removing of old u/s top from book Case and S&F new top of size 1200 mmx 300mm made out of 18mm thick plywood BWR Grade , IS -303 complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 2 | All as per Item Sl No 1.01 here in before but for Bottom ply of Book Case. complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 3 | Taking down old & u/s shutters from book Case and S&F new shutters of size of 380mmx622mm made out of 18mm thick ply wood BWR grade with fixing of flat teak wood beading all around the shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 4 | Taking down old & u/s upper shelf from book Case and S&F new upper shelf of size 820mmx 205mm made out of 18mm thick plywood BWR Grade with teak wood beading alround the shelf ; top portion of shelf shall be covered with 1mm thick veneer sheet of approved shade complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 5 | Removing old unsv/ broken hinges from shutter and S&F new piano type pino continuous hinges of size 20-25mm to both door shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 6 | Removing old unsv/ broken knobs from door shutter and S&F new knobs as per sample approved by Engg-in-Charge/ GE complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 7 | Remove old unsv plywood back from Book case & S&F new back of 6mm thick ply wood BWR Grade of size 1200mmx 660mm complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 8 | Removing old & u/s legs and rail from Book case and S&F new legs of size 45mmx45mmx100mm and rails of size 40mmx25mm x860mm made out of well seasond teakwood complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 9 | Removing old & u/s rail from Book case and S&F new rails of size 40mmx25mm x860mm made out of well seasond teakwood complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 10 | Removing of old u/s sides from Book Case and S&F new sides of size 300mm x 660mm made out of 18mm plywood BWR Grade |
| 11 | Removing of all u/s beading from front portion of Book Case & S&F new 4mm thick 19mm wide teak wood beading to complete front portion of Book Case complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 12 | S&F 4mm vineer sheet of approved shade to entire bottom, sides, shelves, door shutter of Book case complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 13 | M&L Preparation of wooden surfaces and applying 02 coats of French polish of approved shade on wood surfaces of side board expose to view complete as shown on drg,as specified and directed by Engineer-in-Charge. Note: The Drg No FD-237 is applicable for item Nos. 1.01 to 1.13 |
| 14 | Side Board Drg No FD- 241,371 Removing of old u/s top from side board and S&F new top of size 1220mm x455mm made out of 18mm thick plywood BWR Grade complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 15 | All as per Item Sl No 2.01 here in before but for Bottom ply of side Board. complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 16 | Taking down old & u/s door shutters from side board and S&F new door shutters of size 635mmx417mm made out of 18mm thick plywood BWR Grade including fixing of flat teakwood beading all around the shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 17 | Removing old unsv/ broken handle / knobs from door shutter and S&F 100mm long SS handle as per sample approved by Engg-in-Charge/ GE complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 18 | Removing old unsv/ broken handle / knobs from drawers and S&F new knobs for drawers as per sample approved by Engg-in-Charge/ GE complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 19 | Removing old unsv plywood back from side board and S&F new back of 6mm thick plywood BWR Grade of size 1220mm x 635mm complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 20 | Removing old & u/s drawers from side board and S&F new drawers of existing shape,size made out of 6mm & 12mm thick plywood ISI marked BWR Grade complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 21 | Removing of old u/s sides from side board and S&F new sides of size 455mm x 635mm made out of 18mm thick plywood BWR Grade complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 22 | S&F 4mm vineer sheet of approved shade to entire bottom, sides, shelves, door shutter of side board complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 23 | Removing old & u/s legs from side board and S&F new legs of existing shape,size made out of well seasond teakwood complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 24 | Removing old unsv/ broken hinges from shutter and S&F new piano type continuous hinges of size 20-25mm as per sample approved by GE for both door shutter complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 25 | Removing of u/s locks from the door shutters of side board and S&F new locks suitable for side board with duplicate keys complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 26 | Removing of all u/s beading from front portion of side board and S&F new 4mm thick, 18mm wide teak wood beading of semi round shape to complete front portion of side board complete as shown on drg,as specified and directed by Engineer-in-Charge. |
| 27 | M&L Preparation of wooden surfaces and applying 02 coats of French polish of approved shade on wood surfaces of entire side board complete as shown on drg,as specified and directed by Engineer-in-Charge. Note: The Drg No FD-241 &FD-371 is applicable for item Nos. 2.01 to 2.14 |
| 28 | CHARPOY GI NYLON NEWAR / PLY TOP (FD-220) Removal of old broken/ unsv plywood of charpoy GI pipe and S&F new 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 on cleats welded on rails. S&F 02 Nos new Flat iron strip for each charpoy of size 900mmx30mmx5mm thick as per sample approved duly welded to each charpoy on two long rails togather on appropriate position of charpoy with providing new nut & bolts with washer including providing Edges of Ply should be prepared with putty for moisture resistance. New Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy complete as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 29 | S&F 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long as per sample approved on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour complete as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 30 | Removal of old broken/unsv GI elbow three way from existing frame of Charpoy GI pipe and S&F new elbow GI three way 32mm bore medium grade subject to approval of sample complete ISI marked complete as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 31 | Removal of broken/ unsv check nuts from existing frame of charpoy GI pipe and S&F new check nuts GI 32mm bore medium grade ISI marked subject to approval of sample complete as shown on drg, as specified and and directed by Engineer - in -Charge. Note: The Drg No FD-220 is applicable for item Nos.3.01 to 3.04 |
| 32 | Chair Revolving FD/E6/MAP/01 / TP: Removing unsv / damaged Gas lift of chair and S&F new Gas lift 15 inch long with minimum adjustable range around 5 inches all as per sample as approved complete as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 33 | Removing old unsv / broken pedestal assy and S&F new stainless steel pedestal assy with castor wheel as per sample approved as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 34 | Removing old unsv foam cushion and tapestry cloth of seat of chair and S&F new seat made out of 40 Density foam cushion of 75 mm thick of Make: Kurn on/ sleepwel/ Duroflex upholstered with tapestry cloth of approved shade of Make : Bombay dying/ vivid collection/ D Decor duly stiched complete with fixing of PVC lipping around the border of chair complete as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 35 | Removing old unsv foam cushion and tapestry cloth of Back of chair and S&F new back made out of 40 Density foam cushion of 75 mm thick of Make: Kurn on/ sleepwel/ Duroflex upholstered with tapestry cloth of approved shade of Make : Bombay dying/ vivid collection/ D Decor duly stiched complete with fixing of PVC lipping around the border of chair complete as shown on drg, as specified and and directed by Engineer - in -Charge. |
| 36 | Remove old unsv Arms of chair revolving and S&F new scrach proof wheather resistant PU Arms suitable for chair as per sample approved by Engg in Charge /GE. Note: The Drg NoFD/E6/MAP/01 / TP is applicable for item Nos.4.01 to 4.05 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender