Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #56284055

Tender For Repair / Maintenance To Certain Items Of Wooden Furniture Under Ge (Awc) Mhow

Issued by Statutory Bodies & Commissions/Committees · Indore, Madhya Pradesh
Tender Value
45 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair / Maintenance To Certain Items Of Wooden Furniture Under Ge (Awc) Mhow- 1 Teapoy Drg No :- Fd-34, 232, 278, 382 2 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board With 4/6 Mm Teak Wood Edging/ Plastic Beading All Around Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 3 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 4 S & F In Replacement Of Front/ Side Rail/ Stiffener / Corner Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 5 M&L Polishing To Teapoy Of Any Description Width Of Girth Including Cleaning And Preparing The Surface For The Articles Of Teapoy Complete All As Specified, And Shown On Drawing And As Directed By Engr-In-Charge. 6 Peg Table Drg No :- Fd- 25, 236 & 384 7 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board With 4/6 Mm Teak Wood Edging/ Plastic Beading All Around Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 8 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape As Per Drg Including Polishing To Match With The Existing. 9 S & F In Replacement Of Front/ Side Rail/ Stiffner/Corner Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 10 M&L Polishing To Peg Table Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface For The Articles Of Peg Table Complete All As Specified And Directed And Shown On Drawing. 11 Table Dressing Ladies With Stool Drg No:- Fd/E6/Map/4(R) & Fd/E6/Map-Ii/07 12 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterior Grade Of Size/ Shade As Shown On Drawing, Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 13 S & F Drawer Made Out Of 12/18 Mm Thick Pre Laminated Mdf Board As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In- Charge. 14 S & F In Replacement Of 5 Mm Thick Looking Mirror As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 15 S & F In Replacement Of Back Made Of 6 Mm Thick Commercial Ply As Per Existing Size And Shape Complete As Specified, All As Shown In Drawing And As Directed By Engr-In-Charge. 16 Remove Caster Wheel, Supply & Fixing New Caster Wheels Of Stool Dressing As Per Drg And As Directed By Engr-In-Charge. 17 S & F Of Seat Made Of 75 Mm Thick, 40 Density Foam With Fabricated Leathorised Rexine As Per Existing , Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 18 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparing Of The Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 19 Stool Dressing Ladies, Drg No Fd/E6/Map/14 20 S & F In Replacement Of Seat Made Of 75 Mm Thick, 40 Density Foam With Fabricated Leathorised Rexine On 12 Mm Thick Commercial Ply Wood As Per Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 21 S & F Of Fabricated Leathorised Rexine On Seat Of Stool Dressing As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 22 S & F In Replacement Of Legs Of Size As Shown On Drg Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 23 S & F In Replacement Of Front/ Rear Rail Of Size As Shown On Drg Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 24 S & F In Replacement Of Side Rail Of Size As Shown On Drg Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 25 S & F In Replacement Of Stiffener Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 26 M&L Polishing To Stool Dressing Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 27 Trolley For Tv, Drg No.- Fd/E6/Map/04 (R) 28 Supply & Fixing In Replacement Of Legs With New Castor Wheels Legs As Per Drg And As Directed By Engr-In-Charge. 29 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterier Grade Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging Or Plastic Beading All Around Including Polishing To Match With The Existing, Complete All As Specified, As Shown On Drawing And As Directed By Engineer-In- Charge. 30 S & F In Replacement Of Sides/Back/Bottom With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterier Grade Size As Shown On Drawing And As Directed By Engineer-In- Charge. 31 S &F In Replacement Of Lower Shutter With 5Mm Glass Complete As Shown On Drawing And As Directed By Engr-In-Charge. 32 S & F In Replacement Of Upper Shutter Glass 5Mm Thick Complete As Shown On Drawing And As Directed By Engr-In-Charge. 33 Book Rack,Drg No :- Cejz/Skd/334 34 S & F In Replacement Of Sides/Bottom/Top With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterier Grade With 4Mm/ 6Mm Beading Of Teak Wood/ Plastic Beading Size As Shown On Drawing And As Directed By Engineer-In- Charge. 35 S & F In Replacement Of Shutters With Hinges, Magnetic Catcher, Hasp & Staple & Knob Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In- Charge. 36 S & F In Replacement Of Back Of Book Rack Of 6Mm Thick Ply Wood As Per Existing Size And Shape And As Directed By Engr-In-Charge. 37 S & F Of Maroon Blazer Cloth As Shown On Drg And As Directed By Engr-In-Charge. 38 M&L Polishing To Book Rack Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 39 Chair Plastic Moulded (Dining With Cushion) Drg No :- Pearl Super M/S Supreme Indus Ltd Tp 40 S & F Of Velvet Cloth And Foam Cushion For Seat And Supply And Fixing New Velvet Cloth And Foam Cushion As Per Existing And Sample Approved By Engr-In-Charge/ Ge And To Be Fixed Properly. 41 S & F Of Velvet Cloth For Back And Supply And Fixing New Velvet Cloth As Per Existing And Sample Approved By Engr-In-Charge/Ge And To Be Fixed Properly. 42 Double Bed With Roll Out Bed Drg No:- Cejz/Skd/341 43 S & F Of 12 Mm Thick Commercial Plywood Of Existing Size And Shape Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 44 S & F In Replacement Of Middle/Side Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 45 S & F Of Head Rest Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In- Charge. 46 S & F Of Foot Rest Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 47 S & F In Replacement Of Stiffener Made Out Of Hard Wood Mp Teak Including Polishing To Match With Existing Size And Shape Complete All As Specified, Shown On Drawing And As Directed. 48 S & F Of Pvc Shoes And Supply And Fixing With New Shoes As Per Existing Pattern And As Directed By Engr-In-Charge. 49 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparing Of The Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 50 Dressing Table And Bed Room Rack, Drg No Cejz/Skd/340 51 S & F Of Front Shutter With Piano Hinges And Supply And Fixing New Shutters 18 Mm Pre-Laminated Mdf Board Of Size As Shown On Drg, Piano Hinges With Teak Wood Beading Including Polishing As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 52 S & F In Replacement Of Sides And Supply And Fixing New Sides 18Mm Pre-Laminated Mdf Board Of Size As Shown On Drg With Teak Wood Beading Including Polishing As Per Existing Pattern All As Per Existing Pattern As Per Drg And Directed By Engr-In-Charge. 53 S & F In Replacement Of Back And Supply And Fixing New Back 6Mm Commercial Ply Wood With Teak Wood Beading All Around Of Size As Shown On Drg Including Polishing As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 54 S & F Of Anodised Metallic Knob 20Mm And Supply And Fixing New Knob As Per Sample And Approved By Engr-In-Charge / Ge. 55 S & F In Replacement Of Frame And Looking Mirror And Supply And Fixing New Looking Mirror 5Mm Thick With Existing Pegs Including Polish As Per Existing Pattern, All As Per Drawing And As Directed By Engr-In-Charge. 56 S & F In Replacement Of Cushion Of Seat And Supply And Fixing New Cushion 50Mm Thick With Tapestry Cloth Cover All As Existing Pattern, Drg And As Directed By Engr-In-Charge. 57 S & F Of Peg Sets And Supply And Fixing New Peg Set As Per Existing Pattern, Drg And As Directed By Engr-In-Charge. 58 M & L One Coat Of Polish On Wooden Surfaces Of Any Width Of Girth Including Scrapping & Cleaning All As Per Drawing & As Directed By Engr-In-Charge. 59 Settee With Roll Out Bed Drg No :- Cejz/Skd/ 339 60 S & F Of Foam With Tapestry Cover And Supply And Fixing New Foam With Tapestry Cover 100 Mm Thick 40 Density Of Size As Shown In Drg As Per Existing Pattern And As Directed By Engr-In-Charge. 61 S & F Of Foam With Tapestry Cover And Supply And Fixing New Foam With Tapestry Cover 50 Mm Thick, 40 Density, Size As Shown In Drg,As Per Existing Pattern And As Directed By Engr-In-Charge. 62 S & F Of Foam With Tapestry Cover And Supply And Fixing New Foam With Tapestry Cover 50 Mm Thick, 40 Density Size As Shown In Drg, As Per Existing Pattern And As Directed By Engr-In-Charge. 63 S & F In Replacement Of Pvc Rollers And Supply And Fixing With New Pvc Roller Set Of 3 As Per Existing Pattern And As Directed By Engr-In -Charge. 64 S & F Of Top Ply 12 Mm Thick And Supply And Fixing With New Commercial Ply 12Mm Thick Size As Per Drg And As Directed By Engr-In-Charge. 65 S & F In Replacement Of Stiffener For Rollout Bed And Supply And Fixing New Stiffener Teak Wood Size As Per Drg And As Directed By Engr-In-Charge. 66 S & F Of Pvc Shoes And Supply And Fixing With New Shoes As Per Existing Pattern And As Directed By Engr-In-Charge. 67 S & F In Replacement Of Sides 18/19 Mm Thick Pre-Laminated Mdf Board Of Existing Size With 6 Mm Teak Wood Edging Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 68 M & L One Coat Of Polish On Wooden Surfaces Of Any Width Of Girth Including Scrapping & Cleaning All As Per Drawing & As Directed By Engr-In-Charge. Items Shall Be Carried Out In Occupied Officers Qtrs, Unit Lines & Furniture Yard. 69 Side Cabinet With Shutter Drg No :- Cejz/Skd/342 70 S & F In Replacement Of Unserviceable Pre Laminated Particle Board Top/Bottom Side And Providing New 18Mm Thick Pre-Laminated Mdf Board Of Size As Per Drg And As Directed By Engr-In-Charge. 71 S & F Of Pre Laminated Particle Board Of Shelves And Supply & Fixing New 18Mm Prelaminated Mdf Board Of Size With Teak Wood Beading All As Per Drg And Directed By Engr-In-Charge. 72 S & F In Replacement Of Sides Of Particle Board And Supply And Fixing New 18Mm Pre Laminated Mdf Board Of Size As Per Drg And Directed By Engr-In-Charge. 73 S & F Of Magnetic Stopper And Supply And Fixing New Magnetic Stopper As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 74 S & F In Replacement Of Front Shutter Right And Left Side With Piano Hinges And Supply And Fixing New Shutters 18 Mm Pre Laminated Mdf Board With Teak Wood Beading Including Polishing As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 75 S & F In Replacement Of Back Of Ply Wood With 6Mm Commercial Ply Wood Of Size As Shown On Drg And As Directed By Engr-In-Charge. 76 M & L One Coat Of Polish On Wooden Surfaces Of Any Width Of Girth Including Scrapping & Cleaning All As Per Drawing & As Directed By Engr-In-Charge. 77 S & F Of New Legs Wooden Teak Wood Size As Shown In Drg And As Directed By Engr-In-Charge. 78 S & F Of And Desired Metallic Knob 20Mm And Supply And Fixing New Knob As Per Sample And Approved By Engr-In-Charge/Ge. 79 Sofa Chair/ Single Seater Drg No :- Fd- 281 & 373 80 S & F Of Arm Made With Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 81 S & F In Replacement Of Front Leg With Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In Charge. 82 S & F In Replacement Of Rear Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 83 S & F In Replacement Of Front Long Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 84 S & F Of Foam With New 40 Density 100 Mm Thick And Including Covering With Tapestry Cloth Not Less Than Rs. 150/- Per Metre Of Width 1.2 Mtr Complete All As Per Drawing And As Directed. 85 S & F Of Tapestry Cloth Not Less Than Rs. 300/- Per Metre Of Width 1.2 Mtr Complete All As Per Drawing And As Directed By Engr-In-Charge. 86 M&L Polishing To Sofa Chair Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface To Match With The Existing Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 87 Table 3 X 2 Drg No :- Fd- 42, 209, 231,243, 284 88 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Per Drg With 4 Mm Teak Wood Edging/ Plastic Beading All Round Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 89 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 90 S & F In Replacement Of Top Side Rail Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 91 M&L Polishing To Table Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 92 Wall Rack Drg No :- Cejz/Skd/335 93 S & F In Replacement Of Top/Bottom With Made Of 18Mm Thick Pre-Laminated Mdf Board As Per Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 94 S & F In Replacement Of Sides Made Of 18 Mm Thick Pre-Laminated Mdf Board Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In- Charge. 95 S & F Of Back Made Of 8 Mm Thick Teak Face Of Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 96 S & F In Replacement Of Openable Glass Shutter 5 Mm Thick With Magnetic Stopper, Pivot Type Fixing Arrangement For Glass Shutter Including Glass Shelves As Per Existing Size And Shape, As Shown In Drg And As Directed By Engr-In-Charge. 97 Table Writing Drg No :- Fd-67,Fd - 33, 249, 275 98 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging All Around Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 99 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 100 S & F In Replacement Of Side Stiffener Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 101 S & F In Replacement Of Centre Stiffener Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 102 S & F Drawer Made Out Of 12 Mm Thick Teak Wood Plank And 6 Mm Thick Ply At Bottom And Back As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 103 S & F In Replacement Of Shutter Made Out Of 18 Mm Thick Pre-Laminated Mdf Board As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 104 S & F Side And Back Ply Made Out Of 6 Mm Thick Ply As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 105 M&L Polishing To Table Writing Of Any Description Width Of Girth Including Cleaning And Preparing The Surface For The Articles Of Table Writing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 106 Chair Easy Drg No :- Fd- 201 & 229 107 S & F In Replacement Of Rear And Front Legs Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 108 S & F In Replacement Of Front Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 109 S & F In Replacement Of Rear Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 110 S & F In Replacement Of Top Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 111 S & F Of Arm Rest Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 112 M&L Polishing To Chair Easy Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 113 Chair Dining Drg No :- Fd/E6/Map/10 & Fd/Map-Ii/04 114 S & F In Replacement Of Front Legs Of Existing Size And Shape / Pattern Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 115 S & F In Replacement Of Rear Legs Of Existing Size And Shape/ Pattern Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 116 S & F In Replacement Of Side/Front/Rear Rail Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 117 S & F Of Back Vertical Strips As Per Existing Size & Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 118 S & F In Replacement Of Stiffener Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 119 S & F Of Back Rest Of Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 120 S & F In Replacement Of Seat Made Of 75 Mm Thick, 32 Density Foam With Fabricated Leathorised Rexine On 12 Mm Thick Commercial Ply As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 121 S & F Of Fabricated Leathorised Rexine On Seat Of Chair Dinning As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 122 M&L Polishing To Chair Dining Of Any Description Width Or Girth Including Cleaning & Preparation Of Surface Complete All As Specified As Shown In Drawing As Directed By Engr-In-Charge. 123 Table Centre Drg No :- Fd- 29, 274, 235, 375 124 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging Or Plastic Beading All Around Including Polishing To Match The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 125 S & F In Replacement Of Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 126 S & F In Replacement Of Side Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 127 S & F In Replacement Of Front/Rear Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 128 S & F In Replacement Of Stiffener Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 129 M&L Polishing To Table Centre Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 130 Chair Dining Drg No : Fd-228, 279 131 S & F In Replacement Of Front Legs Size As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 132 S & F In Replacement Of Rear Legs Of Shape & Pattern As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 133 S & F In Replacement Of Side /Front /Rear Rail Of Ist Class Hard Wood Mp Teak Including Polishing With To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 134 S & F In Replacement Of Stiffener Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr- In-Charge. 135 S & F Of Back Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 136 M&L Polishing To Chair Dinning Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface For The Articles Of Chair Dining Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 137 Sofa Set Five Seater (3+1+1) Drg No :- Fd-281, 373 138 S & F Of Arm Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified. 139 S & F In Replacement Of Front Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified. 140 S & F In Replacement Of Rear Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 141 S & F In Replacement Of Front Long Rail Of Three Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing. 142 S & F In Replacement Of Front Long Rail Of Single Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing. 143 S & F Of Foam 40 Density 100 Mm Thick And Including Covering With Tapestry Cloth Not Less Than Rs. 300/- Per Mtr Of Width 1.2 Mtr Complete All As Per Drawing. 144 M&L Polishing To Sofa Set Five Seater Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface To Match With The Existing. 145 Chair Writing Drg No :- Fd – 250, Fd-280 146 S & F In Replacement Of Front Legs Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing. 147 S & F In Replacement Of Rear Legs Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing. 148 S & F In Replacement Of Side /Front /Rear Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing 149 S & F Of Arm Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 150 S & F In Replacement Of Stiffener Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 151 S & F Of Back Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 152 M&L Polishing To Chair Writing Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 153 Table Dressing Gents With Mirror Drg No :- Fd/E6/Map/16 154 S & F In Replacement Of 5 Mm Thick Looking Mirror Size As Shown On Drg And Shape Including Fitting With The Teak Wood Frame & Polish To Frame With High Glossy Polish Rest As Per Drg. 155 S & F In Replacement Of Back Made Of 6 Mm Thick Commercial Ply Size And Shape As Shown On Drg, 156 S & F Of Plain Glass Shelf Of Existing Size 5Mm Thick Duly Grinded Smoothly To Edges As Per Existing Size And Shape As Shown On Drawing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In- Charge. 157 M & L Polishing To Table Dressing Gents With Mirror Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface. 158 Bin Linen Multi Purpose Drg No :- Fd/E6/ Map/09 159 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Particle Board Of Existing Size And Shape Complete All As Specified As Per Drg. 160 S & F In Replacement Of Sides Made Of 18Mm Thick Pre-Laminated Mdf Board Rest As Shown In Drawing And As Directed By Engr-In-Charge. 161 S & F Of Handle As Per Sample And As Directed By Engr-In-Charge. 162 S & F Of Back Made Of 12 Mm Thick Commercial Ply Of Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 163 S & F Of Drawer Made Of 12 Mm Thick Pre-Laminated Mdf Board And Bottom Made Of 6Mm Thick Commercial Ply Of Existing Size And Shape Complete All As Specified. 164 M&L Polishing To Bin Linen Multipurpose Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 165 Table Dressing Ladies With Mirror Drg No :- Fd - 251 & 378 166 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdfboard Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging All Round Including Polishing To Match With The Existing. 167 S & F Drawer Made Out Of 12 Mm Thick Teak Wood Plank And 6Mm Thick Ply At Bottom And Back As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 168 S & F In Replacement Of 5 Mm Thick Looking Mirror As Per Existing Size And Pattern. 169 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparing Of The Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 170 Side Board, Drg No :- Fd-26 & 241, 1112 171 S & F In Replacement Top With18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging All Around Including Polishing To Match With The Existing Complete All As Specified. 172 S & F Of Drawer Made Out Of 12 Mm Thick Ply/Particle Board And 6Mm Thick Ply At Bottom And Back As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 173 S & F In Replacement Of Shutter Made Out Of 18 Mm Thick Pre-Laminated Mdf Board As Per Existing Size And Pattern Complete All As Specified. 174 S & F Of Handle As Per Existing Size And Pattern. 175 S & F Of Back Made Out Of 6/12 Mm Thick Ply At Back As Per Existing Size And Pattern Complete All As Specified. 176 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparation Of Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 177 Re-Canning Of Chairs 178 Taking Down Old Cane From The All Type Of Chairs And Re-Canning With 2 To 4 Mm Wide Half Round New Plastic Cane In Godrej Pattern Using Minimum Weight Of Cane Mentioned Below And Complete All As Per Drawing And As Directed :- (A) Chairs Dining Fd (B) Chair Writing Fd (C) Chair Easy Fd 179 Table Dining 6 Persons Drg No Fd -30, 239 & 273 And Map Pattern 180 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing And Shade As Approved With 4/6Mm Mm Teak Wood Edging Or Plastic Beading All Round Including Polishing To Match With The Existing Complete All As Specified 181 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 182 S & F In Replacement Of Side Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 183 S & F In Replacement Of Front / Rear Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 184 M&L Polishing With Hi-Gloss Polishin Table Dining 6 Pers Of Any Description Width Of Girth Including Preparation Of Surface Complete All As Specified. 185 Table Dinning 8 Persons Drg No : Fd-273, 376 & Map Pattern 186 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Size As Shown On Drawing And Shade As Approved With 4/6Mm Mm Teak Wood Edging All Round Or Plastic Beading Including Polishing To Match With The Existing Complete All As Specified 187 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing With To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 188 S & F In Replacement Of Side Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 189 S & F In Replacement Of Front/Rear Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 190 M&L Polishing To Table Dinning 8 Pers Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 191 Table 900 Mm X 900 Mm X 760 Mm Drg No :- Fd –55 & 291 192 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing And Shade As Approved With 4/6 Mm Teak Wood Edging All Round Or Plastic Beading Including Polishing To Match With The Existing Complete All As Specified 193 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified 194 S & F In Replacement Of Top / Side Rail Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing. 195 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparation Of Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 196 Chair Plastic With Arms Model - Ornate Make - Supreme 197 S & F Of Velvet Cloth And Foam Cushion For Seat And Supply And Fixing New Velvet Cloth And Foam Cushion As Per Existing And Sample Approved By Engr-In-Charge/ Ge And To Be Fixed Properly. 198 S & F Of Velvet Cloth For Back And Supply And Fixing New Velvet Cloth As Per Existing And Sample Approved By Engr-In-Charge/Ge And To Be Fixed Properly. 199 Hat Stand With Mirror Drg No :- Fd-362, Fd 206 & Fd-233 200 S & F In Replacement Of 5 Mm Thick Looking Mirror As Per Existing Size And Shape Including Fitting With Teak Wood Frame & Polish To Frame With High Glossy Polish And Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 201 S & F In Replacement Of Back Made Of 6 Mm Thick Commercial Ply Size As Per Existing Size And Shape Complete As Specified, All As Shown In Drawing And As Directed By Engr-In-Charge. 202 S & F In Replacement Of Pegs As Per Existing Size And Shape As Per Sample Complete All As Specified And As Directed By Engr-In-Charge. 203 M & L Polishing To Hat Stand With Mirror Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified. 204 Chair Dining Long Back Drg No :- Fd-357 205 S&F In Replacement Of Existing Broken Seat Frames Rails Of Chair And Fixing Of New Hard Wood Mp Teak Rails Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 206 S&F Of Existing Broken Wooden Supporting Batten Of Top Back Portion Of Chair Dining Long Back And S&F With New Hard Wood Mp Teak Supporters Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 207 S&F In Replacement Of Existing Plywood And Rexine And U/S Cushion From Damaged Seat And S&F Of New Plywood 6 Mm Thick Of Size As Shown On Drg, Fixed With 20 Density Foam Of 50 Mm Thick Duly Covered With Leatheriest Rexine As Shown On Drawing And As Directed By Engr-In-Charge. 208 S&F In Replacement Of Existing Plywood And Rexine And U/S Cushion From Damaged Back And S&F Of New Plywood 6 Mm Thick Of Size As Shown On Drg, Fixed With 20 Density Foam Of 50 Mm Thick Duly Covered With Leatheriest Rexine As Shown On Drawing And As Directed By Engr-In-Charge. 209 S&F In Replacement Of Existing Broken Front Legs Of Chair Dinning Long Back And S&F Of New Hard Wood Mp Teak Legs Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 210 M&L Polishing To Chair Dining Of Any Description Width Or Girth Including Cleaning & Preparation Of Surface Complete All As Specified As Shown In Drawing As Directed By Engr-In-Charge. 211 S&F In Replacement Of Existing Broken Rear Legs Of Chair Dinning Long Back And S&F Of New 1St Class Hard Wood Mp Teak Legs Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 212 S&F In Replacement Of Existing Broken Stiffener Of Chair Dinning Long Back And S&F Of New 1St Class Hard Wood Mp Stiffener Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 213 Sofa Set Five Seater Cushioned Drg No :- Fd/Map-Ii/02 214 S & F Of Arm Made Out Ofhard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified 215 S & F In Replacement Of Front Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified 216 S & F In Replacement Of Rear Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 217 S & F In Replacement Of Front Long Rail Of Three Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 218 S & F In Replacement Of Front Long Rail Of Single Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 219 S & F Of Foam 40 Density 100 Mm Thick And Including Covering With Tapestry Cloth Not Less Than Rs. 300/- Per Mtr Of Width 1.2 Mtr Complete All As Per Drawing And As Directed By Engr-In-Charge. 220 S & F Of Tapestry Cloth Not Less Than Rs. 250/- Per Metre Of Width 1.2 Mtr Complete All As Per Drawing And As Directed. 221 M&L Polishing To Sofa Set Five Seater Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface To Match With The Existing Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 222 Chair Dining Drg No :- Fd/Map-Ii/05 223 S & F In Replacement Of Front Legs Size As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 224 S & F In Replacement Of Rear Legs Of Shape & Pattern As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 225 S & F In Replacement Of Side /Front /Rear Rail Of Ist Class Hard Wood Mp Teak Including Polishing With To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 226 S & F In Replacement Of Stiffener Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr- In-Charge. One Additional 20 Mm Thick Teak Wood Centre Stiffner Of Full Length To Be Provided At The Bottom Of The Seat For Extra Strength. 227 S & F Of Back Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 228 S & F In Replacement Of Seat Made Out Of Pvc Including Including Fitting With Original Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 229 M&L Polishing To Chair Dinning Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface For The Articles Of Chair Dining Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 230 Bed Hard Plywood Drg No :- Fd-213,246 231 S&F In Replacement Of Old Existing Damaged/ 12 Mm Thick Ply Wood Of Bed Hard Plywood And Supply And Fixing New 12 Mm Bwr Commercial Ply Complete All As Specified And As Shown In Drawing And As Directed By Engr-In-Charge. 232 S&F In Replacement Of Old Existing Damaged/ Head Board With Teak Wood Leg And S&F New Head Board With Teak Wood Leg Of Existing Size & Shape Including Polishing All Around Complete All As Specified And As Shown In Drawing And As Directed By Engr-In-Charge. 233 S&F In Replacement Of Old Existing Damaged/ Foot Board With Teak Wood Leg And S&F New Foot Board With Teak Wood Leg Of Existing Size & Shape Including Polishing All Around Complete All As Specified And As Shown In Drawing And As Directed By Engr-In-Charge. 234 M&L Polishing To Bed Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 235 S & F In Replacement Of Long Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete. Please Enable Macros To View Boq Information

BOQ

Name of Work:- REPAIR / MAINT TO CERTAIN ITEMS OF WOODEN FURNITURE UNDER GE (AWC) MHOW
Sl. No. Item Description
1Teapoy Drg No :- FD-34, 232, 278, 382
2S & F in replacement of top with 18mm thick pre-laminated MDF board with 4/6 mm teak wood edging/ Plastic beading all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
3S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.
4S & F in replacement of front/ side rail/ Stiffener / corner made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
5M&L Polishing to teapoy of any description width of girth including cleaning and preparing the surface for the articles of teapoy complete all as specified, and shown on drawing and as directed by Engr-in-Charge.
6Peg Table Drg No :- FD- 25, 236 & 384
7S & F in replacement of top with 18mm thick pre-laminated MDF board with 4/6 mm teak wood edging/ plastic beading all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
8S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape as per drg including polishing to match with the existing.
9S & F in replacement of front/ side rail/ Stiffner/corner made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
10M&L Polishing to peg Table of any description width of girth including cleaning and preparation of the surface for the articles of peg table complete all as specified and directed and shown on drawing.
11Table dressing ladies with stool Drg No:- FD/E6/MAP/4(R) & FD/E6/MAP-II/07
12S & F in replacement of top with 18mm thick pre-laminated MDF board interior or exterior grade of size/ Shade as shown on drawing, complete all as specified, shown on drawing and as directed by Engr-in-Charge.
13S & F drawer made out of 12/18 mm thick pre laminated MDF board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in- Charge.
14S & F in replacement of 5 mm thick looking mirror as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.
15S & F in replacement of back made of 6 mm thick commercial ply as per existing size and shape complete as specified, all as shown in drawing and as directed by Engr-in-Charge.
16Remove caster wheel, Supply & Fixing new caster wheels of stool dressing as per drg and as directed by Engr-in-Charge.
17S & F of Seat made of 75 mm thick, 40 density foam with fabricated leathorised Rexine as per existing , of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
18M&L Polishing with Hi-gloss polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
19Stool Dressing Ladies, Drg No FD/E6/MAP/14
20S & F in replacement of Seat made of 75 mm thick, 40 density foam with fabricated leathorised Rexine on 12 mm thick commercial ply wood as per existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
21S & F of fabricated leathorised Rexine on seat of stool dressing as shown on drawing complete all as specified and as directed by Engr-in-Charge.
22S & F in replacement of legs of size as shown on drg of hard wood MP teak including polishing with Hi-gloss polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
23S & F in replacement of front/ rear rail of size as shown on drg of existing size and shape of hard wood MP teak including polishing with Hi-gloss polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
24S & F in replacement of side rail of size as shown on drg of existing size and shape of hard wood MP teak including polishing with Hi-gloss polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
25S & F in replacement of stiffener of existing size and shape of hard wood MP teak including polishing with Hi-gloss polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
26M&L Polishing to Stool Dressing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
27Trolley for TV, Drg No.- FD/E6/MAP/04 (R)
28Supply & Fixing in replacement of legs with new castor wheels legs as per drg and as directed by Engr-in-Charge.
29S & F in replacement of top with 18mm thick pre-laminated MDF board interior or exterier grade of size as shown on drawing, shade as approved with 4/6 mm teak wood edging or plastic beading all around including polishing to match with the existing, complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.
30S & F in replacement of sides/back/bottom with 18mm thick pre-laminated MDF board interior or exterier grade size as shown on drawing and as directed by Engineer-in- Charge.
31S &F in replacement of lower shutter with 5mm glass complete as shown on drawing and as directed by Engr-in-Charge.
32S & F in replacement of upper shutter glass 5mm thick complete as shown on drawing and as directed by Engr-in-Charge.
33Book Rack,Drg No :- CEJZ/SKD/334
34S & F in replacement of sides/bottom/Top with 18mm thick pre-laminated MDF board interior or exterier grade with 4mm/ 6mm beading of teak wood/ plastic beading size as shown on drawing and as directed by Engineer-in- Charge.
35S & F in replacement of Shutters with Hinges, Magnetic Catcher, Hasp & Staple & knob size and shape complete all as specified, as shown in drawing and as directed by Engr-in- Charge.
36S & F in replacement of back of book rack of 6mm thick ply wood as per existing size and shape and as directed by Engr-in-Charge.
37S & F of maroon blazer cloth as shown on drg and as directed by Engr-in-Charge.
38M&L Polishing to book rack of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
39Chair Plastic Moulded (Dining with cushion) Drg No :- Pearl Super M/s Supreme Indus Ltd TP
40S & F of velvet cloth and Foam cushion for seat and supply and fixing new velvet cloth and foam cushion as per existing and sample approved by Engr-in-Charge/ GE and to be fixed properly.
41S & F of velvet cloth for back and supply and fixing new velvet cloth as per existing and sample approved by Engr-in-Charge/GE and to be fixed properly.
42Double bed with roll out bed Drg No:- CEJZ/SKD/341
43S & F of 12 mm thick commercial plywood of existing size and shape complete all as specified, shown on drawing and as directed by Engr-in-Charge.
44S & F in replacement of middle/side rail made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
45S & F of head rest of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in- Charge.
46S & F of foot rest of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
47S & F in replacement of stiffener made out of hard wood MP teak including polishing to match with existing size and shape complete all as specified, shown on drawing and as directed.
48S & F of PVC shoes and supply and fixing with new shoes as per existing pattern and as directed by Engr-in-Charge.
49M&L Polishing with Hi-gloss polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
50Dressing Table and bed room rack, Drg No CEJZ/SKD/340
51S & F of front shutter with piano hinges and supply and fixing new shutters 18 mm pre-laminated MDF board of size as shown on drg, piano hinges with teak wood beading including polishing as per existing pattern all as per drg and as directed by Engr-in-Charge.
52S & F in replacement of sides and supply and fixing new sides 18mm pre-laminated mdf board of size as shown on drg with teak wood beading including polishing as per existing pattern all as per existing pattern as per drg and directed by Engr-in-Charge.
53S & F in replacement of back and supply and fixing new back 6mm commercial ply wood with teak wood beading all around of size as shown on drg including polishing as per existing pattern all as per drg and as directed by Engr-in-Charge.
54S & F of anodised metallic knob 20mm and supply and fixing new knob as per sample and approved by Engr-in-Charge / GE.
55S & F in replacement of frame and looking mirror and supply and fixing new looking mirror 5mm thick with existing pegs including polish as per existing pattern, all as per drawing and as directed by Engr-in-Charge.
56S & F in replacement of cushion of seat and supply and fixing new cushion 50mm thick with tapestry cloth cover all as existing pattern, drg and as directed by Engr-in-Charge.
57S & F of peg sets and supply and fixing new peg set as per existing pattern, drg and as directed by Engr-in-Charge.
58M & L one coat of polish on wooden surfaces of any width of girth including scrapping & cleaning all as per drawing & as directed by Engr-in-Charge.
59Settee with roll out bed Drg No :- CEJZ/SKD/ 339
60S & F of Foam with tapestry cover and supply and fixing new Foam with tapestry cover 100 mm thick 40 density of size as shown in drg as per existing pattern and as directed by Engr-in-Charge.
61S & F of Foam with tapestry cover and supply and fixing new Foam with tapestry cover 50 mm thick, 40 density, size as shown in drg,as per existing pattern and as directed by Engr-in-Charge.
62S & F of Foam with tapestry cover and supply and fixing new Foam with tapestry cover 50 mm thick, 40 density size as shown in drg, as per existing pattern and as directed by Engr-in-Charge.
63S & F in replacement of PVC rollers and supply and fixing with new PVC roller set of 3 as per existing pattern and as directed by Engr-in -Charge.
64S & F of top ply 12 mm thick and supply and fixing with new commercial ply 12mm thick size as per drg and as directed by Engr-in-Charge.
65S & F in replacement of stiffener for rollout bed and supply and fixing new stiffener teak wood size as per drg and as directed by Engr-in-Charge.
66S & F of PVC shoes and supply and fixing with new shoes as per existing pattern and as directed by Engr-in-Charge.
67S & F in replacement of sides 18/19 mm thick pre-laminated MDF board of existing size with 6 mm teak wood edging including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
68M & L one coat of polish on wooden surfaces of any width of girth including scrapping & cleaning all as per drawing & as directed by Engr-in-Charge. Items shall be carried out in occupied Officers Qtrs, unit lines & furniture yard.
69Side Cabinet with shutter Drg No :- CEJZ/SKD/342
70S & F in replacement of unserviceable pre laminated particle board top/bottom side and providing new 18mm thick pre-laminated MDF board of size as per drg and as directed by Engr-in-Charge.
71S & F of pre laminated particle board of shelves and supply & fixing new 18mm prelaminated MDF board of size with teak wood beading all as per drg and directed by Engr-in-Charge.
72S & F in replacement of sides of particle board and supply and fixing new 18mm pre laminated MDF board of size as per drg and directed by Engr-in-Charge.
73S & F of magnetic stopper and supply and fixing new magnetic stopper as per existing pattern all as per drg and as directed by Engr-in-Charge.
74S & F in replacement of front shutter right and left side with piano hinges and supply and fixing new shutters 18 mm pre laminated MDF board with teak wood beading including polishing as per existing pattern all as per drg and as directed by Engr-in-Charge.
75S & F in replacement of back of ply wood with 6mm commercial ply wood of size as shown on drg and as directed by Engr-in-Charge.
76M & L one coat of polish on wooden surfaces of any width of girth including scrapping & cleaning all as per drawing & as directed by Engr-in-Charge.
77S & F of new legs wooden teak wood size as shown in drg and as directed by Engr-in-Charge.
78S & F of and desired metallic Knob 20mm and supply and fixing new knob as per sample and approved by Engr-in-Charge/GE.
79Sofa Chair/ Single Seater Drg No :- FD- 281 & 373
80S & F of arm made with hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
81S & F in replacement of front leg with hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.
82S & F in replacement of rear leg made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.
83S & F in replacement of front long rail made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
84S & F of foam with new 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 150/- per metre of width 1.2 Mtr complete all as per drawing and as directed.
85S & F of tapestry cloth not less than Rs. 300/- per metre of width 1.2 Mtr complete all as per drawing and as directed by Engr-in-Charge.
86M&L Polishing to Sofa chair of any description width of girth including cleaning and preparation of the surface to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
87Table 3' x 2' Drg No :- FD- 42, 209, 231,243, 284
88S & F in replacement of top with 18mm thick pre-laminated MDF board of size as per drg with 4 mm teak wood edging/ Plastic beading all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
89S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
90S & F in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
91M&L Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engr-in-Charge.
92Wall Rack Drg No :- CEJZ/SKD/335
93S & F in replacement of top/bottom with made of 18mm thick pre-laminated MDF board as per existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
94S & F in replacement of sides made of 18 mm thick pre-laminated MDF board existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in- Charge.
95S & F of back made of 8 mm thick teak face of existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
96S & F in replacement of openable glass shutter 5 mm thick with magnetic stopper, pivot type fixing arrangement for glass shutter including glass shelves as per existing size and shape, as shown in drg and as directed by Engr-in-Charge.
97Table writing Drg No :- FD-67,FD - 33, 249, 275
98S & F in replacement of top with 18mm thick pre-laminated MDF board of size as shown on drawing, Shade as approved with 4/6 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
99S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.
100S & F in replacement of side stiffener made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.
101S & F in replacement of centre stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
102S & F drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.
103S & F in replacement of shutter made out of 18 mm thick pre-laminated MDF board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.
104S & F side and back ply made out of 6 mm thick ply as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.
105M&L Polishing to Table writing of any description width of girth including cleaning and preparing the surface for the articles of table writing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
106Chair Easy Drg No :- FD- 201 & 229
107S & F in replacement of rear and front legs of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
108S & F in replacement of front rail of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
109S & F in replacement of rear rail of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
110S & F in replacement of top rail of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
111S & F of arm rest of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
112M&L Polishing to Chair Easy of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
113Chair Dining Drg No :- FD/E6/MAP/10 & FD/MAP-II/04
114S & F in replacement of front legs of existing size and shape / pattern of hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
115S & F in replacement of rear legs of existing size and shape/ pattern of hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
116S & F in replacement of side/front/rear rail of existing size and shape of hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
117S & F of back vertical strips as per existing size & shape of hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
118S & F in replacement of stiffener of existing size and shape of hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
119S & F of back rest of of existing size and shape of hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
120S & F in replacement of Seat made of 75 mm thick, 32 density foam with fabricated leathorised rexine on 12 mm thick commercial ply as shown on drawing complete all as specified and as directed by Engr-in-Charge.
121S & F of fabricated leathorised rexine on seat of chair dinning as shown on drawing complete all as specified and as directed by Engr-in-Charge.
122M&L Polishing to chair dining of any description width or girth including cleaning & preparation of surface complete all as specified as shown in drawing as directed by Engr-in-Charge.
123Table Centre Drg No :- FD- 29, 274, 235, 375
124S & F in replacement of top with 18mm thick pre-laminated MDF board of size as shown on drawing, Shade as approved with 4/6 mm teak wood edging or plastic beading all around including polishing to match the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
125S & F in replacement of leg made out of hard wood MP teak of existing size and shape including polishing to match with the existing all shown on drawing and as directed by Engr-in-Charge.
126S & F in replacement of side rail made out of hard wood MP teak of existing size and shape including polishing to match with the existing all shown on drawing and as directed by Engr-in-Charge.
127S & F in replacement of front/rear rail made out of hard wood MP teak of existing size and shape including polishing to match with the existing all shown on drawing and as directed by Engr-in-Charge.
128S & F in replacement of stiffener made out of hard wood MP teak of existing size and shape including polishing to match with the existing all shown on drawing and as directed by Engr-in-Charge.
129M&L Polishing to Table Centre of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
130Chair Dining Drg No : FD-228, 279
131S & F in replacement of front legs size as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
132S & F in replacement of rear legs of shape & pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
133S & F in replacement of side /front /rear rail of Ist class hard wood MP teak including polishing with to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
134S & F in replacement of stiffener of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr- in-Charge.
135S & F of back rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
136M&L Polishing to Chair Dinning of any description width of girth including cleaning and preparation of the surface for the articles of Chair dining complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
137Sofa Set Five Seater (3+1+1) Drg No :- FD-281, 373
138S & F of arm made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified.
139S & F in replacement of front leg made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified.
140S & F in replacement of rear leg made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
141S & F in replacement of front long rail of three seater made out of hard wood MP teak of existing size and shape including polishing to match with the existing.
142S & F in replacement of front long rail of single seater made out of hard wood MP teak of existing size and shape including polishing to match with the existing.
143S & F of foam 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 300/- per Mtr of width 1.2 mtr complete all as per drawing.
144M&L Polishing to Sofa set Five Seater of any description width of girth including cleaning and preparation of the surface to match with the existing.
145Chair Writing Drg No :- FD – 250, FD-280
146S & F in replacement of front legs of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing.
147S & F in replacement of rear legs of hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing.
148S & F in replacement of side /front /rear rail of hard wood MP teak including polishing to match with the existing
149S & F of arm rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
150S & F in replacement of stiffener of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
151S & F of back rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
152M&L Polishing to Chair Writing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
153Table Dressing Gents with Mirror Drg No :- FD/E6/MAP/16
154S & F in replacement of 5 mm thick looking mirror Size as shown on drg and shape including fitting with the teak wood frame & polish to frame with High glossy polish rest as per Drg.
155S & F in replacement of back made of 6 mm thick commercial ply Size and shape as shown on drg,
156S & F of plain glass shelf of existing size 5mm thick duly grinded smoothly to edges as per existing size and shape as shown on drawing complete all as specified, as shown in drawing and as directed by Engr-in- Charge.
157M & L Polishing to Table Dressing gents with mirror of any description width of girth including cleaning and preparation of the surface.
158BIN LINEN MULTI PURPOSE Drg No :- FD/E6/ MAP/09
159S & F in replacement of top with 18mm thick pre-laminated particle board of existing size and shape complete all as specified as per drg.
160S & F in replacement of sides made of 18mm thick pre-laminated MDF board rest as shown in drawing and as directed by Engr-in-Charge.
161S & F of Handle as per sample and as directed by Engr-in-Charge.
162S & F of back made of 12 mm thick commercial ply of existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
163S & F of drawer made of 12 mm thick pre-laminated MDF board and bottom made of 6mm thick commercial ply of existing size and shape complete all as specified.
164M&L Polishing to bin linen Multipurpose of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
165Table dressing ladies with mirror Drg No :- FD - 251 & 378
166S & F in replacement of top with 18mm thick pre-laminated MDFboard of size as shown on drawing, Shade as approved with 4/6 mm teak wood edging all round including polishing to match with the existing.
167S & F drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.
168S & F in replacement of 5 mm thick looking mirror as per existing size and pattern.
169M&L Polishing with Hi-gloss polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
170Side Board, Drg No :- FD-26 & 241, 1112
171S & F in replacement top with18mm thick pre-laminated MDF board of size as shown on drawing, Shade as approved with 4/6 mm teak wood edging all around including polishing to match with the existing complete all as specified.
172S & F of drawer made out of 12 mm thick ply/particle board and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engr-in-Charge.
173S & F in replacement of shutter made out of 18 mm thick pre-laminated MDF board as per existing size and pattern complete all as specified.
174S & F of Handle as per existing size and pattern.
175S & F of back made out of 6/12 mm thick ply at back as per existing size and pattern complete all as specified.
176M&L Polishing with Hi-gloss polish of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
177RE-CANNING OF CHAIRS
178Taking down old cane from the all type of chairs and re-canning with 2 to 4 mm wide half round new plastic cane in Godrej pattern using minimum weight of cane mentioned below and complete all as per drawing and as directed :- (a) Chairs Dining FD (b) Chair Writing FD (c) Chair Easy FD
179TABLE DINING 6 PERSONS Drg No FD -30, 239 & 273 and MAP Pattern
180S & F in replacement of top with 18mm thick pre-laminated MDF board of size as shown on drawing and shade as approved with 4/6mm mm teak wood edging or plastic beading all round including polishing to match with the existing complete all as specified
181S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
182S & F in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
183S & F in replacement of front / rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
184M&L Polishing with Hi-gloss polishin table dining 6 pers of any description width of girth including preparation of surface complete all as specified.
185TABLE DINNING 8 PERSONS Drg No : FD-273, 376 & MAP Pattern
186S & F in replacement of top with 18mm thick pre-laminated MDF board size as shown on drawing and shade as approved with 4/6mm mm teak wood edging all round or plastic beading including polishing to match with the existing complete all as specified
187S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing with to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.
188S & F in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
189S & F in replacement of front/rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
190M&L Polishing to Table dinning 8 Pers of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
191TABLE 900 MM x 900 MM x 760 MM Drg No :- FD –55 & 291
192S & F in replacement of top with 18mm thick pre-laminated MDF board of size as shown on drawing and shade as approved with 4/6 mm teak wood edging all round or plastic beading including polishing to match with the existing complete all as specified
193S & F in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified
194S & F in replacement of top / side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing.
195M&L Polishing with Hi-gloss polish of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
196Chair Plastic with arms Model - Ornate Make - Supreme
197S & F of velvet cloth and Foam cushion for seat and supply and fixing new velvet cloth and foam cushion as per existing and sample approved by Engr-in-Charge/ GE and to be fixed properly.
198S & F of velvet cloth for back and supply and fixing new velvet cloth as per existing and sample approved by Engr-in-Charge/GE and to be fixed properly.
199Hat Stand with Mirror Drg No :- FD-362, FD 206 & FD-233
200S & F in replacement of 5 mm thick looking mirror as per existing size and shape including fitting with teak wood frame & polish to frame with High glossy polish and complete all as specified, as shown in drawing and as directed by Engr-in-Charge.
201S & F in replacement of back made of 6 mm thick commercial ply Size as per existing size and shape complete as specified, all as shown in drawing and as directed by Engr-in-Charge.
202S & F in replacement of pegs as per existing size and shape as per sample complete all as specified and as directed by Engr-in-Charge.
203M & L Polishing to Hat Stand with mirror of any description width of girth including cleaning and preparation of the surface complete all as specified.
204Chair Dining Long Back Drg No :- FD-357
205S&F in replacement of existing broken seat frames rails of chair and fixing of new hard wood MP teak rails of size as shown on drawing and as directed by Engr-in-Charge.
206S&F of existing broken wooden supporting batten of top back portion of chair dining long back and S&F with new hard wood MP teak supporters of size as shown on drawing and as directed by Engr-in-Charge.
207S&F in replacement of existing plywood and rexine and u/s cushion from damaged seat and S&F of new plywood 6 mm thick of size as shown on drg, fixed with 20 density foam of 50 mm thick duly covered with leatheriest rexine as shown on drawing and as directed by Engr-in-Charge.
208S&F in replacement of existing plywood and rexine and u/s cushion from damaged back and S&F of new plywood 6 mm thick of size as shown on drg, fixed with 20 density foam of 50 mm thick duly covered with leatheriest rexine as shown on drawing and as directed by Engr-in-Charge.
209S&F in replacement of existing broken front legs of chair dinning long back and S&F of new hard wood MP teak legs of size as shown on drawing and as directed by Engr-in-Charge.
210M&L Polishing to chair dining of any description width or girth including cleaning & preparation of surface complete all as specified as shown in drawing as directed by Engr-in-Charge.
211S&F in replacement of existing broken rear legs of chair dinning long back and S&F of new 1st class hard wood MP teak legs of size as shown on drawing and as directed by Engr-in-Charge.
212S&F in replacement of existing broken stiffener of chair dinning long back and S&F of new 1st class hard wood MP stiffener of size as shown on drawing and as directed by Engr-in-Charge.
213Sofa Set Five Seater cushioned Drg No :- FD/MAP-II/02
214S & F of arm made out ofhard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified
215S & F in replacement of front leg made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified
216S & F in replacement of rear leg made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
217S & F in replacement of front long rail of three seater made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
218S & F in replacement of front long rail of single seater made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engr-in-Charge.
219S & F of foam 40 density 100 mm thick and including covering with tapestry cloth not less than Rs. 300/- per Mtr of width 1.2 mtr complete all as per drawing and as directed by Engr-in-Charge.
220S & F of tapestry cloth not less than Rs. 250/- per metre of width 1.2 Mtr complete all as per drawing and as directed.
221M&L Polishing to Sofa set Five Seater of any description width of girth including cleaning and preparation of the surface to match with the existing complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
222Chair Dining Drg No :- FD/MAP-II/05
223S & F in replacement of front legs size as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
224S & F in replacement of rear legs of shape & pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engr-in-Charge.
225S & F in replacement of side /front /rear rail of Ist class hard wood MP teak including polishing with to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
226S & F in replacement of stiffener of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr- in-Charge. One additional 20 mm thick teak wood centre Stiffner of full length to be provided at the bottom of the seat for extra strength.
227S & F of back rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
228S & F in replacement of Seat made out of PVC including including fitting with original shape as shown on drawing complete all as specified and as directed by Engr-in-Charge.
229M&L Polishing to Chair Dinning of any description width of girth including cleaning and preparation of the surface for the articles of Chair dining complete all as specified, as shown on drawing and as directed by Engr-in-Charge.
230Bed Hard Plywood Drg No :- FD-213,246
231S&F in replacement of old existing damaged/ 12 mm thick ply wood of Bed Hard plywood and supply and fixing new 12 mm BWR commercial Ply complete all as specified and as shown in drawing and as directed by Engr-in-Charge.
232S&F in replacement of old existing damaged/ head board with teak wood leg and S&F new head board with teak wood leg of existing size & shape including polishing all around complete all as specified and as shown in drawing and as directed by Engr-in-Charge.
233S&F in replacement of old existing damaged/ foot board with teak wood leg and S&F new foot board with teak wood leg of existing size & shape including polishing all around complete all as specified and as shown in drawing and as directed by Engr-in-Charge.
234M&L Polishing to Bed of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engr-in-Charge.
235S & F in replacement of long rail made out of hard wood MP teak of existing size and shape including polishing to match with the existing complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56284055
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45 Lakhs
LAST DATE 24-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair / Maintenance To Certain Items Of Wooden Furniture Under Ge (Awc) Mhow- 1 Teapoy Drg No :- Fd-34, 232, 278, 382 2 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board With 4/6 Mm Teak Wood Edging/ Plastic Beading All Around Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 3 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 4 S & F In Replacement Of Front/ Side Rail/ Stiffener / Corner Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 5 M&L Polishing To Teapoy Of Any Description Width Of Girth Including Cleaning And Preparing The Surface For The Articles Of Teapoy Complete All As Specified, And Shown On Drawing And As Directed By Engr-In-Charge. 6 Peg Table Drg No :- Fd- 25, 236 & 384 7 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board With 4/6 Mm Teak Wood Edging/ Plastic Beading All Around Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 8 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape As Per Drg Including Polishing To Match With The Existing. 9 S & F In Replacement Of Front/ Side Rail/ Stiffner/Corner Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 10 M&L Polishing To Peg Table Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface For The Articles Of Peg Table Complete All As Specified And Directed And Shown On Drawing. 11 Table Dressing Ladies With Stool Drg No:- Fd/E6/Map/4(R) & Fd/E6/Map-Ii/07 12 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterior Grade Of Size/ Shade As Shown On Drawing, Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 13 S & F Drawer Made Out Of 12/18 Mm Thick Pre Laminated Mdf Board As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In- Charge. 14 S & F In Replacement Of 5 Mm Thick Looking Mirror As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 15 S & F In Replacement Of Back Made Of 6 Mm Thick Commercial Ply As Per Existing Size And Shape Complete As Specified, All As Shown In Drawing And As Directed By Engr-In-Charge. 16 Remove Caster Wheel, Supply & Fixing New Caster Wheels Of Stool Dressing As Per Drg And As Directed By Engr-In-Charge. 17 S & F Of Seat Made Of 75 Mm Thick, 40 Density Foam With Fabricated Leathorised Rexine As Per Existing , Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 18 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparing Of The Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 19 Stool Dressing Ladies, Drg No Fd/E6/Map/14 20 S & F In Replacement Of Seat Made Of 75 Mm Thick, 40 Density Foam With Fabricated Leathorised Rexine On 12 Mm Thick Commercial Ply Wood As Per Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 21 S & F Of Fabricated Leathorised Rexine On Seat Of Stool Dressing As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 22 S & F In Replacement Of Legs Of Size As Shown On Drg Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 23 S & F In Replacement Of Front/ Rear Rail Of Size As Shown On Drg Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 24 S & F In Replacement Of Side Rail Of Size As Shown On Drg Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 25 S & F In Replacement Of Stiffener Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing With Hi-Gloss Polish Including Preparation Of Surface To Match With The Existing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 26 M&L Polishing To Stool Dressing Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 27 Trolley For Tv, Drg No.- Fd/E6/Map/04 (R) 28 Supply & Fixing In Replacement Of Legs With New Castor Wheels Legs As Per Drg And As Directed By Engr-In-Charge. 29 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterier Grade Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging Or Plastic Beading All Around Including Polishing To Match With The Existing, Complete All As Specified, As Shown On Drawing And As Directed By Engineer-In- Charge. 30 S & F In Replacement Of Sides/Back/Bottom With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterier Grade Size As Shown On Drawing And As Directed By Engineer-In- Charge. 31 S &F In Replacement Of Lower Shutter With 5Mm Glass Complete As Shown On Drawing And As Directed By Engr-In-Charge. 32 S & F In Replacement Of Upper Shutter Glass 5Mm Thick Complete As Shown On Drawing And As Directed By Engr-In-Charge. 33 Book Rack,Drg No :- Cejz/Skd/334 34 S & F In Replacement Of Sides/Bottom/Top With 18Mm Thick Pre-Laminated Mdf Board Interior Or Exterier Grade With 4Mm/ 6Mm Beading Of Teak Wood/ Plastic Beading Size As Shown On Drawing And As Directed By Engineer-In- Charge. 35 S & F In Replacement Of Shutters With Hinges, Magnetic Catcher, Hasp & Staple & Knob Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In- Charge. 36 S & F In Replacement Of Back Of Book Rack Of 6Mm Thick Ply Wood As Per Existing Size And Shape And As Directed By Engr-In-Charge. 37 S & F Of Maroon Blazer Cloth As Shown On Drg And As Directed By Engr-In-Charge. 38 M&L Polishing To Book Rack Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 39 Chair Plastic Moulded (Dining With Cushion) Drg No :- Pearl Super M/S Supreme Indus Ltd Tp 40 S & F Of Velvet Cloth And Foam Cushion For Seat And Supply And Fixing New Velvet Cloth And Foam Cushion As Per Existing And Sample Approved By Engr-In-Charge/ Ge And To Be Fixed Properly. 41 S & F Of Velvet Cloth For Back And Supply And Fixing New Velvet Cloth As Per Existing And Sample Approved By Engr-In-Charge/Ge And To Be Fixed Properly. 42 Double Bed With Roll Out Bed Drg No:- Cejz/Skd/341 43 S & F Of 12 Mm Thick Commercial Plywood Of Existing Size And Shape Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 44 S & F In Replacement Of Middle/Side Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 45 S & F Of Head Rest Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In- Charge. 46 S & F Of Foot Rest Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 47 S & F In Replacement Of Stiffener Made Out Of Hard Wood Mp Teak Including Polishing To Match With Existing Size And Shape Complete All As Specified, Shown On Drawing And As Directed. 48 S & F Of Pvc Shoes And Supply And Fixing With New Shoes As Per Existing Pattern And As Directed By Engr-In-Charge. 49 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparing Of The Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 50 Dressing Table And Bed Room Rack, Drg No Cejz/Skd/340 51 S & F Of Front Shutter With Piano Hinges And Supply And Fixing New Shutters 18 Mm Pre-Laminated Mdf Board Of Size As Shown On Drg, Piano Hinges With Teak Wood Beading Including Polishing As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 52 S & F In Replacement Of Sides And Supply And Fixing New Sides 18Mm Pre-Laminated Mdf Board Of Size As Shown On Drg With Teak Wood Beading Including Polishing As Per Existing Pattern All As Per Existing Pattern As Per Drg And Directed By Engr-In-Charge. 53 S & F In Replacement Of Back And Supply And Fixing New Back 6Mm Commercial Ply Wood With Teak Wood Beading All Around Of Size As Shown On Drg Including Polishing As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 54 S & F Of Anodised Metallic Knob 20Mm And Supply And Fixing New Knob As Per Sample And Approved By Engr-In-Charge / Ge. 55 S & F In Replacement Of Frame And Looking Mirror And Supply And Fixing New Looking Mirror 5Mm Thick With Existing Pegs Including Polish As Per Existing Pattern, All As Per Drawing And As Directed By Engr-In-Charge. 56 S & F In Replacement Of Cushion Of Seat And Supply And Fixing New Cushion 50Mm Thick With Tapestry Cloth Cover All As Existing Pattern, Drg And As Directed By Engr-In-Charge. 57 S & F Of Peg Sets And Supply And Fixing New Peg Set As Per Existing Pattern, Drg And As Directed By Engr-In-Charge. 58 M & L One Coat Of Polish On Wooden Surfaces Of Any Width Of Girth Including Scrapping & Cleaning All As Per Drawing & As Directed By Engr-In-Charge. 59 Settee With Roll Out Bed Drg No :- Cejz/Skd/ 339 60 S & F Of Foam With Tapestry Cover And Supply And Fixing New Foam With Tapestry Cover 100 Mm Thick 40 Density Of Size As Shown In Drg As Per Existing Pattern And As Directed By Engr-In-Charge. 61 S & F Of Foam With Tapestry Cover And Supply And Fixing New Foam With Tapestry Cover 50 Mm Thick, 40 Density, Size As Shown In Drg,As Per Existing Pattern And As Directed By Engr-In-Charge. 62 S & F Of Foam With Tapestry Cover And Supply And Fixing New Foam With Tapestry Cover 50 Mm Thick, 40 Density Size As Shown In Drg, As Per Existing Pattern And As Directed By Engr-In-Charge. 63 S & F In Replacement Of Pvc Rollers And Supply And Fixing With New Pvc Roller Set Of 3 As Per Existing Pattern And As Directed By Engr-In -Charge. 64 S & F Of Top Ply 12 Mm Thick And Supply And Fixing With New Commercial Ply 12Mm Thick Size As Per Drg And As Directed By Engr-In-Charge. 65 S & F In Replacement Of Stiffener For Rollout Bed And Supply And Fixing New Stiffener Teak Wood Size As Per Drg And As Directed By Engr-In-Charge. 66 S & F Of Pvc Shoes And Supply And Fixing With New Shoes As Per Existing Pattern And As Directed By Engr-In-Charge. 67 S & F In Replacement Of Sides 18/19 Mm Thick Pre-Laminated Mdf Board Of Existing Size With 6 Mm Teak Wood Edging Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 68 M & L One Coat Of Polish On Wooden Surfaces Of Any Width Of Girth Including Scrapping & Cleaning All As Per Drawing & As Directed By Engr-In-Charge. Items Shall Be Carried Out In Occupied Officers Qtrs, Unit Lines & Furniture Yard. 69 Side Cabinet With Shutter Drg No :- Cejz/Skd/342 70 S & F In Replacement Of Unserviceable Pre Laminated Particle Board Top/Bottom Side And Providing New 18Mm Thick Pre-Laminated Mdf Board Of Size As Per Drg And As Directed By Engr-In-Charge. 71 S & F Of Pre Laminated Particle Board Of Shelves And Supply & Fixing New 18Mm Prelaminated Mdf Board Of Size With Teak Wood Beading All As Per Drg And Directed By Engr-In-Charge. 72 S & F In Replacement Of Sides Of Particle Board And Supply And Fixing New 18Mm Pre Laminated Mdf Board Of Size As Per Drg And Directed By Engr-In-Charge. 73 S & F Of Magnetic Stopper And Supply And Fixing New Magnetic Stopper As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 74 S & F In Replacement Of Front Shutter Right And Left Side With Piano Hinges And Supply And Fixing New Shutters 18 Mm Pre Laminated Mdf Board With Teak Wood Beading Including Polishing As Per Existing Pattern All As Per Drg And As Directed By Engr-In-Charge. 75 S & F In Replacement Of Back Of Ply Wood With 6Mm Commercial Ply Wood Of Size As Shown On Drg And As Directed By Engr-In-Charge. 76 M & L One Coat Of Polish On Wooden Surfaces Of Any Width Of Girth Including Scrapping & Cleaning All As Per Drawing & As Directed By Engr-In-Charge. 77 S & F Of New Legs Wooden Teak Wood Size As Shown In Drg And As Directed By Engr-In-Charge. 78 S & F Of And Desired Metallic Knob 20Mm And Supply And Fixing New Knob As Per Sample And Approved By Engr-In-Charge/Ge. 79 Sofa Chair/ Single Seater Drg No :- Fd- 281 & 373 80 S & F Of Arm Made With Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 81 S & F In Replacement Of Front Leg With Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In Charge. 82 S & F In Replacement Of Rear Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 83 S & F In Replacement Of Front Long Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 84 S & F Of Foam With New 40 Density 100 Mm Thick And Including Covering With Tapestry Cloth Not Less Than Rs. 150/- Per Metre Of Width 1.2 Mtr Complete All As Per Drawing And As Directed. 85 S & F Of Tapestry Cloth Not Less Than Rs. 300/- Per Metre Of Width 1.2 Mtr Complete All As Per Drawing And As Directed By Engr-In-Charge. 86 M&L Polishing To Sofa Chair Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface To Match With The Existing Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 87 Table 3 X 2 Drg No :- Fd- 42, 209, 231,243, 284 88 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Per Drg With 4 Mm Teak Wood Edging/ Plastic Beading All Round Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 89 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 90 S & F In Replacement Of Top Side Rail Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 91 M&L Polishing To Table Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 92 Wall Rack Drg No :- Cejz/Skd/335 93 S & F In Replacement Of Top/Bottom With Made Of 18Mm Thick Pre-Laminated Mdf Board As Per Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 94 S & F In Replacement Of Sides Made Of 18 Mm Thick Pre-Laminated Mdf Board Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In- Charge. 95 S & F Of Back Made Of 8 Mm Thick Teak Face Of Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 96 S & F In Replacement Of Openable Glass Shutter 5 Mm Thick With Magnetic Stopper, Pivot Type Fixing Arrangement For Glass Shutter Including Glass Shelves As Per Existing Size And Shape, As Shown In Drg And As Directed By Engr-In-Charge. 97 Table Writing Drg No :- Fd-67,Fd - 33, 249, 275 98 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging All Around Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 99 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 100 S & F In Replacement Of Side Stiffener Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 101 S & F In Replacement Of Centre Stiffener Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 102 S & F Drawer Made Out Of 12 Mm Thick Teak Wood Plank And 6 Mm Thick Ply At Bottom And Back As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 103 S & F In Replacement Of Shutter Made Out Of 18 Mm Thick Pre-Laminated Mdf Board As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 104 S & F Side And Back Ply Made Out Of 6 Mm Thick Ply As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 105 M&L Polishing To Table Writing Of Any Description Width Of Girth Including Cleaning And Preparing The Surface For The Articles Of Table Writing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 106 Chair Easy Drg No :- Fd- 201 & 229 107 S & F In Replacement Of Rear And Front Legs Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 108 S & F In Replacement Of Front Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 109 S & F In Replacement Of Rear Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 110 S & F In Replacement Of Top Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 111 S & F Of Arm Rest Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 112 M&L Polishing To Chair Easy Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 113 Chair Dining Drg No :- Fd/E6/Map/10 & Fd/Map-Ii/04 114 S & F In Replacement Of Front Legs Of Existing Size And Shape / Pattern Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 115 S & F In Replacement Of Rear Legs Of Existing Size And Shape/ Pattern Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 116 S & F In Replacement Of Side/Front/Rear Rail Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 117 S & F Of Back Vertical Strips As Per Existing Size & Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 118 S & F In Replacement Of Stiffener Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 119 S & F Of Back Rest Of Of Existing Size And Shape Of Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 120 S & F In Replacement Of Seat Made Of 75 Mm Thick, 32 Density Foam With Fabricated Leathorised Rexine On 12 Mm Thick Commercial Ply As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 121 S & F Of Fabricated Leathorised Rexine On Seat Of Chair Dinning As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 122 M&L Polishing To Chair Dining Of Any Description Width Or Girth Including Cleaning & Preparation Of Surface Complete All As Specified As Shown In Drawing As Directed By Engr-In-Charge. 123 Table Centre Drg No :- Fd- 29, 274, 235, 375 124 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging Or Plastic Beading All Around Including Polishing To Match The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 125 S & F In Replacement Of Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 126 S & F In Replacement Of Side Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 127 S & F In Replacement Of Front/Rear Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 128 S & F In Replacement Of Stiffener Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing All Shown On Drawing And As Directed By Engr-In-Charge. 129 M&L Polishing To Table Centre Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 130 Chair Dining Drg No : Fd-228, 279 131 S & F In Replacement Of Front Legs Size As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 132 S & F In Replacement Of Rear Legs Of Shape & Pattern As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 133 S & F In Replacement Of Side /Front /Rear Rail Of Ist Class Hard Wood Mp Teak Including Polishing With To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 134 S & F In Replacement Of Stiffener Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr- In-Charge. 135 S & F Of Back Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 136 M&L Polishing To Chair Dinning Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface For The Articles Of Chair Dining Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 137 Sofa Set Five Seater (3+1+1) Drg No :- Fd-281, 373 138 S & F Of Arm Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified. 139 S & F In Replacement Of Front Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified. 140 S & F In Replacement Of Rear Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 141 S & F In Replacement Of Front Long Rail Of Three Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing. 142 S & F In Replacement Of Front Long Rail Of Single Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing. 143 S & F Of Foam 40 Density 100 Mm Thick And Including Covering With Tapestry Cloth Not Less Than Rs. 300/- Per Mtr Of Width 1.2 Mtr Complete All As Per Drawing. 144 M&L Polishing To Sofa Set Five Seater Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface To Match With The Existing. 145 Chair Writing Drg No :- Fd – 250, Fd-280 146 S & F In Replacement Of Front Legs Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing. 147 S & F In Replacement Of Rear Legs Of Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing. 148 S & F In Replacement Of Side /Front /Rear Rail Of Hard Wood Mp Teak Including Polishing To Match With The Existing 149 S & F Of Arm Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 150 S & F In Replacement Of Stiffener Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 151 S & F Of Back Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 152 M&L Polishing To Chair Writing Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 153 Table Dressing Gents With Mirror Drg No :- Fd/E6/Map/16 154 S & F In Replacement Of 5 Mm Thick Looking Mirror Size As Shown On Drg And Shape Including Fitting With The Teak Wood Frame & Polish To Frame With High Glossy Polish Rest As Per Drg. 155 S & F In Replacement Of Back Made Of 6 Mm Thick Commercial Ply Size And Shape As Shown On Drg, 156 S & F Of Plain Glass Shelf Of Existing Size 5Mm Thick Duly Grinded Smoothly To Edges As Per Existing Size And Shape As Shown On Drawing Complete All As Specified, As Shown In Drawing And As Directed By Engr-In- Charge. 157 M & L Polishing To Table Dressing Gents With Mirror Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface. 158 Bin Linen Multi Purpose Drg No :- Fd/E6/ Map/09 159 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Particle Board Of Existing Size And Shape Complete All As Specified As Per Drg. 160 S & F In Replacement Of Sides Made Of 18Mm Thick Pre-Laminated Mdf Board Rest As Shown In Drawing And As Directed By Engr-In-Charge. 161 S & F Of Handle As Per Sample And As Directed By Engr-In-Charge. 162 S & F Of Back Made Of 12 Mm Thick Commercial Ply Of Existing Size And Shape Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 163 S & F Of Drawer Made Of 12 Mm Thick Pre-Laminated Mdf Board And Bottom Made Of 6Mm Thick Commercial Ply Of Existing Size And Shape Complete All As Specified. 164 M&L Polishing To Bin Linen Multipurpose Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 165 Table Dressing Ladies With Mirror Drg No :- Fd - 251 & 378 166 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdfboard Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging All Round Including Polishing To Match With The Existing. 167 S & F Drawer Made Out Of 12 Mm Thick Teak Wood Plank And 6Mm Thick Ply At Bottom And Back As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 168 S & F In Replacement Of 5 Mm Thick Looking Mirror As Per Existing Size And Pattern. 169 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparing Of The Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 170 Side Board, Drg No :- Fd-26 & 241, 1112 171 S & F In Replacement Top With18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing, Shade As Approved With 4/6 Mm Teak Wood Edging All Around Including Polishing To Match With The Existing Complete All As Specified. 172 S & F Of Drawer Made Out Of 12 Mm Thick Ply/Particle Board And 6Mm Thick Ply At Bottom And Back As Per Existing Size And Pattern Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 173 S & F In Replacement Of Shutter Made Out Of 18 Mm Thick Pre-Laminated Mdf Board As Per Existing Size And Pattern Complete All As Specified. 174 S & F Of Handle As Per Existing Size And Pattern. 175 S & F Of Back Made Out Of 6/12 Mm Thick Ply At Back As Per Existing Size And Pattern Complete All As Specified. 176 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparation Of Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 177 Re-Canning Of Chairs 178 Taking Down Old Cane From The All Type Of Chairs And Re-Canning With 2 To 4 Mm Wide Half Round New Plastic Cane In Godrej Pattern Using Minimum Weight Of Cane Mentioned Below And Complete All As Per Drawing And As Directed :- (A) Chairs Dining Fd (B) Chair Writing Fd (C) Chair Easy Fd 179 Table Dining 6 Persons Drg No Fd -30, 239 & 273 And Map Pattern 180 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing And Shade As Approved With 4/6Mm Mm Teak Wood Edging Or Plastic Beading All Round Including Polishing To Match With The Existing Complete All As Specified 181 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 182 S & F In Replacement Of Side Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 183 S & F In Replacement Of Front / Rear Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 184 M&L Polishing With Hi-Gloss Polishin Table Dining 6 Pers Of Any Description Width Of Girth Including Preparation Of Surface Complete All As Specified. 185 Table Dinning 8 Persons Drg No : Fd-273, 376 & Map Pattern 186 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Size As Shown On Drawing And Shade As Approved With 4/6Mm Mm Teak Wood Edging All Round Or Plastic Beading Including Polishing To Match With The Existing Complete All As Specified 187 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing With To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engineer-In- Charge. 188 S & F In Replacement Of Side Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 189 S & F In Replacement Of Front/Rear Rail Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 190 M&L Polishing To Table Dinning 8 Pers Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 191 Table 900 Mm X 900 Mm X 760 Mm Drg No :- Fd –55 & 291 192 S & F In Replacement Of Top With 18Mm Thick Pre-Laminated Mdf Board Of Size As Shown On Drawing And Shade As Approved With 4/6 Mm Teak Wood Edging All Round Or Plastic Beading Including Polishing To Match With The Existing Complete All As Specified 193 S & F In Replacement Of Leg Made Out Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified 194 S & F In Replacement Of Top / Side Rail Of Ist Class Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing. 195 M&L Polishing With Hi-Gloss Polish Of Any Description Width Of Girth Including Preparation Of Surface For Polish Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 196 Chair Plastic With Arms Model - Ornate Make - Supreme 197 S & F Of Velvet Cloth And Foam Cushion For Seat And Supply And Fixing New Velvet Cloth And Foam Cushion As Per Existing And Sample Approved By Engr-In-Charge/ Ge And To Be Fixed Properly. 198 S & F Of Velvet Cloth For Back And Supply And Fixing New Velvet Cloth As Per Existing And Sample Approved By Engr-In-Charge/Ge And To Be Fixed Properly. 199 Hat Stand With Mirror Drg No :- Fd-362, Fd 206 & Fd-233 200 S & F In Replacement Of 5 Mm Thick Looking Mirror As Per Existing Size And Shape Including Fitting With Teak Wood Frame & Polish To Frame With High Glossy Polish And Complete All As Specified, As Shown In Drawing And As Directed By Engr-In-Charge. 201 S & F In Replacement Of Back Made Of 6 Mm Thick Commercial Ply Size As Per Existing Size And Shape Complete As Specified, All As Shown In Drawing And As Directed By Engr-In-Charge. 202 S & F In Replacement Of Pegs As Per Existing Size And Shape As Per Sample Complete All As Specified And As Directed By Engr-In-Charge. 203 M & L Polishing To Hat Stand With Mirror Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified. 204 Chair Dining Long Back Drg No :- Fd-357 205 S&F In Replacement Of Existing Broken Seat Frames Rails Of Chair And Fixing Of New Hard Wood Mp Teak Rails Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 206 S&F Of Existing Broken Wooden Supporting Batten Of Top Back Portion Of Chair Dining Long Back And S&F With New Hard Wood Mp Teak Supporters Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 207 S&F In Replacement Of Existing Plywood And Rexine And U/S Cushion From Damaged Seat And S&F Of New Plywood 6 Mm Thick Of Size As Shown On Drg, Fixed With 20 Density Foam Of 50 Mm Thick Duly Covered With Leatheriest Rexine As Shown On Drawing And As Directed By Engr-In-Charge. 208 S&F In Replacement Of Existing Plywood And Rexine And U/S Cushion From Damaged Back And S&F Of New Plywood 6 Mm Thick Of Size As Shown On Drg, Fixed With 20 Density Foam Of 50 Mm Thick Duly Covered With Leatheriest Rexine As Shown On Drawing And As Directed By Engr-In-Charge. 209 S&F In Replacement Of Existing Broken Front Legs Of Chair Dinning Long Back And S&F Of New Hard Wood Mp Teak Legs Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 210 M&L Polishing To Chair Dining Of Any Description Width Or Girth Including Cleaning & Preparation Of Surface Complete All As Specified As Shown In Drawing As Directed By Engr-In-Charge. 211 S&F In Replacement Of Existing Broken Rear Legs Of Chair Dinning Long Back And S&F Of New 1St Class Hard Wood Mp Teak Legs Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 212 S&F In Replacement Of Existing Broken Stiffener Of Chair Dinning Long Back And S&F Of New 1St Class Hard Wood Mp Stiffener Of Size As Shown On Drawing And As Directed By Engr-In-Charge. 213 Sofa Set Five Seater Cushioned Drg No :- Fd/Map-Ii/02 214 S & F Of Arm Made Out Ofhard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified 215 S & F In Replacement Of Front Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified 216 S & F In Replacement Of Rear Leg Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 217 S & F In Replacement Of Front Long Rail Of Three Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 218 S & F In Replacement Of Front Long Rail Of Single Seater Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 219 S & F Of Foam 40 Density 100 Mm Thick And Including Covering With Tapestry Cloth Not Less Than Rs. 300/- Per Mtr Of Width 1.2 Mtr Complete All As Per Drawing And As Directed By Engr-In-Charge. 220 S & F Of Tapestry Cloth Not Less Than Rs. 250/- Per Metre Of Width 1.2 Mtr Complete All As Per Drawing And As Directed. 221 M&L Polishing To Sofa Set Five Seater Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface To Match With The Existing Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 222 Chair Dining Drg No :- Fd/Map-Ii/05 223 S & F In Replacement Of Front Legs Size As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 224 S & F In Replacement Of Rear Legs Of Shape & Pattern As Shown On Drawing Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing Complete All As Specified And As Directed By Engr-In-Charge. 225 S & F In Replacement Of Side /Front /Rear Rail Of Ist Class Hard Wood Mp Teak Including Polishing With To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 226 S & F In Replacement Of Stiffener Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr- In-Charge. One Additional 20 Mm Thick Teak Wood Centre Stiffner Of Full Length To Be Provided At The Bottom Of The Seat For Extra Strength. 227 S & F Of Back Rest Of Ist Class Hard Wood Mp Teak Including Polishing To Match With The Existing, Of Size And Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 228 S & F In Replacement Of Seat Made Out Of Pvc Including Including Fitting With Original Shape As Shown On Drawing Complete All As Specified And As Directed By Engr-In-Charge. 229 M&L Polishing To Chair Dinning Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface For The Articles Of Chair Dining Complete All As Specified, As Shown On Drawing And As Directed By Engr-In-Charge. 230 Bed Hard Plywood Drg No :- Fd-213,246 231 S&F In Replacement Of Old Existing Damaged/ 12 Mm Thick Ply Wood Of Bed Hard Plywood And Supply And Fixing New 12 Mm Bwr Commercial Ply Complete All As Specified And As Shown In Drawing And As Directed By Engr-In-Charge. 232 S&F In Replacement Of Old Existing Damaged/ Head Board With Teak Wood Leg And S&F New Head Board With Teak Wood Leg Of Existing Size & Shape Including Polishing All Around Complete All As Specified And As Shown In Drawing And As Directed By Engr-In-Charge. 233 S&F In Replacement Of Old Existing Damaged/ Foot Board With Teak Wood Leg And S&F New Foot Board With Teak Wood Leg Of Existing Size & Shape Including Polishing All Around Complete All As Specified And As Shown In Drawing And As Directed By Engr-In-Charge. 234 M&L Polishing To Bed Of Any Description Width Of Girth Including Cleaning And Preparation Of The Surface Complete All As Specified, Shown On Drawing And As Directed By Engr-In-Charge. 235 S & F In Replacement Of Long Rail Made Out Of Hard Wood Mp Teak Of Existing Size And Shape Including Polishing To Match With The Existing Complete. Please Enable Macros To View Boq Information
Basic Detail
Tender No 8965/AWC/MHOW/ OF 2026-27
Bidding Type Tender
Location
City Indore
State Madhya Pradesh
Key Dates
Publish Date 02 Jul 2026
Submission Date 24 Jul 2026
Open Date 27 Jul 2026
Finance
Tender Value 45 Lakhs
Tender Fee 500
EMD 90000
Exemption Not Available
Document List
58eb744c-96a4-4f9b-b85e-8b3e4a1c624b.html
BOQ_868813.xls
Makelist.pdf
TDocus.pdf
Tendernotice_1 (1).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Jul 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

58eb744c-96a4-4f9b-b85e-8b3e4a1c624b.html

xls

BOQ_868813.xls

pdf

Makelist.pdf

pdf

TDocus.pdf

pdf

Tendernotice_1 (1).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders