Tender For Construction Of Feed Store At Trout Fish Farm Kulgam.
Tender Value
9.93 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
6 days left
EMD
19860
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Feed Store At Trout Fish Farm Kulgam.
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of JCB and tractor, labour etc for dressing and disposal of waste material etc. |
| 2 | Tractor |
| 3 | 1 JCB |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Backfilling and levelling complete job (centre line method). |
| 5 | P/L stone soling Nallah hand packed in bed including all carriages etc Complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering,finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Upto Plinth Level |
| 9 | Lintel, beams above plinth level |
| 10 | Providing and Laying in Position Cement Concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand) incld. SuperStructure |
| 12 | Supplying and filling of RBM in plinth incld. Spreading, dressing, watering with all carraige etc complete. |
| 13 | Providing woodwork in Frames of doors, Windows hoisted and fixed in position complete using imported wood available in market complete with finishing. |
| 14 | Providing and Fixing of M.S hold fasts 50 cm long (40x5 mm) embedded in cement concrete |
| 15 | Reinforcement for RCC Work incld. Straightening, bending , binding and placing in position all complete using approved brand steel (Sail/Tasta tiscon/jindal panther agg.) |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate. |
| 17 | Providing and Fixing of 35 mm wide glass strips in level incld. All carriage and wastages complete. |
| 18 | Centering and Shuttering incld. Strutting, propping etc and removal of same using ply board for finished surface. |
| 19 | Foundation |
| 20 | Walls any thickness |
| 21 | Providing and Fixing of Panelled or Panelled & glazed shutters for doors, windows, incld. ISI marked butt. Hinges with necessary screws (30 mm thick imported wood K.D/Silver or as directed) incld. 4 mm glass pans/12 mm laminated ply board of approved shade and quality complete with all necessary beedings nails and fixtures required all carriage complete as directed or drawing provided by Eng. Incharge. |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :(Using Imported wood K.D/Silver) as directed. |
| 23 | Providing & Fixing , 4 mm thick panels of plain Glass incld. Nails, 20 mm beadings etc complete. |
| 24 | Providing & Fixing of Aluminium ISI marked fittings to doors, windows, of required colour and shade with necessary screws etc. complete. |
| 25 | T - Bolts (100 mm) |
| 26 | T - Bolts (150 mm) |
| 27 | Handles (100 mm) |
| 28 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.Welded. |
| 29 | Providing & Fixing of corrugated High Rib (GS Sheets) colour coated 0.50 mm thick approved brand as directed by Engineer incharge with necessary nuts, bolts washers complete job , approved brand as directed by Engineer incharge with all carriage, as stages, overlaps complete. |
| 30 | Providing ridges or hips of width 60cm overall width plain G.S. sheetsfixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 31 | 12 mm thick cement plaster in 1:6 cement mortar:- inner side plaster incld. Carriages. |
| 32 | P/A of 1 mm thick water proof putty over plastered surface to prepare the surface even and smooth |
| 33 | Painting with synthetic enamel paint of approved band andmanufacture of required colour to give an even shade on New work (twoor more coats) including a coat of approved steel primer but excluding acoat of mordant solution |
| 34 | Finishing outside walls with water proofing excel paint of required shade new work two or more coats of approved brand with primer |
| 35 | Applying and Fixing of Rolling shutters of aproved make, made of required size M.S laths, interlocked together through their entire length and jointed together at the end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, incld. the cost of providing and fixing necessary 27.5 cm long wire springs manufactered from high tensile steel wire of adequate strenght confirming to IS:4454 part -1 and M.S top cover of required thickness for rolling shutters.180x1.25 mm M.S faths with 1.25mm thick top cover incld. priming coat and colour complete job. |
| 36 | Carriage of Materials |
| 37 | Aggregate/Sand (10 km) |
| 38 | Brick (10 km) 841466.0 992929.88 839989.0 991187.02 151198.02 991187.02 246664.0 44399.52 291063.52 291063.52 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender