Tender For Repair & Maintenance To Water Pipe Lines With Connected Items At Aop & Arty Center Area Under Ge Nasik Road C .
Tender Value
50 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
16 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance To Water Pipe Lines With Connected Items At Aop & Arty Center Area Under Ge Nasik Road C .
BOQ
| Sl. No. | Item Description |
| 1 | Notes for Entire Work:-(i) Water Supply being an essential service to MES, the work shall be completed within -02 Days of handed over by Dept ,else penelty of Rs.1,000 per day shall be imposed.(ii) If the work shall not be completed within 10 Days, the work shall be cancelled and PSD submitted by the Contractor will be forefitted. |
| 2 | M&L for rectification of water lekage in pipes 80 mm to 300 mm dia of any type (CI/GI/DI) including necessary excavation, joints, pipes etc all as specified and directed. Note : (i) Excavation and eartwork, fittings, pipe etc shall be measured and paid under respective items of BoQ. |
| 3 | M&L for rectification of water lekage in pipes 15 mm to 50 mm dia of any type including necessary excavation, joints, pipes etc all as specified and directed. Note : (i) Excavation and eartwork , fittings, pipe etc shall be measured and paid under respective items of Schedule |
| 4 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep and getting out in soft/ loose soil all as specified and directed |
| 5 | Returining, filling in, including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed |
| 6 | Removing excavated soil to a distance not exce 50 m and deposited where directed at a level not exceding 1.5 m above the starting point all as specified and directed. |
| 7 | Taking up or down 15 mm dia GI Tubing and connections including cleaning for refixing or removal to store. |
| 8 | All as per Item No. 7.00 above but 20 mm dia |
| 9 | All as per Item No. 7.00 above but 25 mm dia |
| 10 | All as per Item No. 7.00 above but 40 mm dia |
| 11 | All as per Item No. 7.00 above but 50 mm dia |
| 12 | All as per Item No. 7.00 above but 80 mm dia |
| 13 | All as per Item No. 7.00 above but 100 mm dia |
| 14 | Refixing old 15 mm dia GI Tubing and connections in New or old position (walls, Ceiling, Floors etc) |
| 15 | All as per Item No. 14.00 above but 20 mm dia |
| 16 | All as per Item No. 14.00 above but 25 mm dia |
| 17 | All as per Item No. 14.00 above but 40 mm dia |
| 18 | All as per Item No. 14.00 above but 50 mm dia |
| 19 | All as per Item No. 14.00 above but 80 mm dia |
| 20 | All as per Item No. 14.00 above but 100 mm dia |
| 21 | S&F 15 mm dia GI tubing medium grade with all fittings complete laid in trenches or on wall/Ceiling. |
| 22 | All as per Item No. 21.00 above but 20 mm dia |
| 23 | All as per Item No. 21.00 above but 25 mm dia |
| 24 | All as per Item No. 21.00 above but 40 mm dia |
| 25 | All as per Item No. 21.00 above but 50 mm dia |
| 26 | All as per Item No. 21.00 above but 80 mm dia |
| 27 | All as per Item No. 21.00 above but 100 mm dia |
| 28 | S&F 20 mm dia uPVC pipe rustproof and UV-resistant with all necessary fittings complete laid in trenches or on wall/Ceiling. |
| 29 | All as per Item No. 28.00 above but 25 mm dia |
| 30 | All as per Item No. 28.00 above but 40 mm dia |
| 31 | All as per Item No. 28.00 above but 50 mm dia |
| 32 | Taking up 300 mm dia water pipe mains incuding flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead. |
| 33 | All as per Item No. 32.00 above but 250 mm dia |
| 34 | All as per Item No. 32.00 above but 200 mm dia |
| 35 | All as per Item No. 32.00 above but 150 mm dia |
| 36 | All as per Item No. 32.00 above but 100 mm dia |
| 37 | Supply and lay 300 mm dia DI pipe K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 38 | Supply and lay 250 mm dia DI pipe K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 39 | Supply and lay 200 mm dia DI pipe K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 40 | Supply and lay 150 mm dia DI pipe K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 41 | Supply and lay 100 mm dia DI pipe K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed.Note: for item No 37 to 41 :- Excavation, Earthwork, DI fittings shall be measured and paid seperately under respective items. |
| 42 | M&L for 300 mm dia run lead joints complete for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 43 | All as per Item No. 42.00 above but 250 mm dia |
| 44 | All as per Item No. 42.00 above but 200 mm dia |
| 45 | All as per Item No. 42.00 above but 150 mm dia |
| 46 | All as per Item No. 42.00 above but 100 mm dia |
| 47 | All as per Item No. 42.00 above but 80 mm dia |
| 48 | S&F rubber tyton joint of 300 mm dia size : |
| 49 | All as per Item No. 48.00 above but 250 mm dia |
| 50 | All as per Item No. 48.00 above but 200 mm dia |
| 51 | All as per Item No. 48.00 above but 150 mm dia |
| 52 | All as per Item No. 48.00 above but 100 mm dia |
| 53 | All as per Item No. 48.00 above but 80 mm dia |
| 54 | S&F rubber gasket joint for flange end of 300 mm dia size. |
| 55 | All as per Item No. 54.00 above but 250 mm dia |
| 56 | All as per Item No. 54.00 above but 200 mm dia |
| 57 | All as per Item No. 54.00 above but 150 mm dia |
| 58 | All as per Item No. 54.00 above but 100 mm dia |
| 59 | All as per Item No. 54.00 above but 80 mm dia |
| 60 | S&F 300 mm dia with 06 holes machanical joint / Coller ISI marked for spigot end pipe. |
| 61 | All as per Item No. 60.00 above but for 250 mm |
| 62 | All as per Item No. 60.00 above but for 200 mm |
| 63 | All as per Item No. 60.00 above but for 150 mm |
| 64 | All as per Item No. 60.00 above but for 100 mm |
| 65 | All as per Item No. 60.00 above but for 80 mm |
| 66 | Supply and lay spigot and socketed DI fittings, such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged etc of size upto 150mm dia. |
| 67 | Supply and lay spigot and socketed DI fittings, such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged etc of size 200mm to 300mm dia. |
| 68 | S&F in repair 25 mm uPVC Ball Valve rustproof and UV-resistant with all necessary fittings and fixed complete laid in wall/Ceiling. |
| 69 | S&F in repair 40 mm uPVC Ball Valve rustproof and UV-resistant with all necessary fittings and fixed complete laid in wall/Ceiling. |
| 70 | S&F in repair 50 mm uPVC Ball Valve rust proof and UV-resistant with all necessary fittings and fixed complete laid in wall/Ceiling. |
| 71 | S&F in repair 20 mm dia Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with necessary GI fittings complete. |
| 72 | S&F in repair 25 mm dia Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with necessary GI fittings complete. |
| 73 | S&F in repair 40 mm dia Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with necessary GI fittings complete. |
| 74 | S&F in repair 50 mm dia Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with necessary GI fittings complete. |
| 75 | Dismantling/taking out unserviceable sluice valve/NRV/Air release valves of size 80mm to 300mm bore by opening/cutting rusted nuts, bolts etc all as specified and directed. |
| 76 | S&F 80 mm CI Rising Spindle sluice valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed.Make: Kriloskar or L&T |
| 77 | All as per Item No. 76.00 above but 100 mm |
| 78 | All as per Item No. 76.00 above but 150 mm |
| 79 | All as per Item No. 76.00 above but 200 mm |
| 80 | S&F 25 mm Ball Valve both ends flanged and drilled, bonnet wedge stuffing box, gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed. |
| 81 | All as per Item No. 80.00 above but 50 mm |
| 82 | S&F 150 mm Strainer for Suction both ends flanged and drilled, bonnet wedge stuffing box, gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed. |
| 83 | S&F 80 mm Non Return Valve ISI marked as per existing dimensions, model etc including nuts, bolts & washer bolts with rubber packing. |
| 84 | All as per Item No. 83.00 above but 100 mm |
| 85 | All as per Item No. 83.00 above but 150 mm |
| 86 | All as per Item No. 83.00 above but 200 mm |
| 87 | S&F cast iron double ball air release valves of size 80mm as per IS 14845, PN rating H-7 ISI marked complete all as specified and directed |
| 88 | Cutting of road /hard standing for laying /dismantling of pipe line and making good surfaces matching with the existing surface after laying of pipe line (up to 300 mm dia pipe) complete. |
| 89 | Area cleaning/levelling/excavation /digging at MES installations at any width and length by using JCB complete all as directed. Note: 1. The cost of POL included in quotated rates .2. After Start and finsh of the work , hrs slips shall be provided by the contrcator3. LOG Sheet shall be maintained. |
| 90 | M&L for construction valve chamber with bricks masonry of size 900x900x 900 mm (internal dimension) with 150 mm thick foundation using PCC 1:4:8, type D2, using 40 mm graded stone aggregate, 230 mm thick brick walls built in CM 1:6, 10 mm thick plaster in CM 1:4 on internal and external surface (above ground level), finished even and fair without using extra cement 5mm thick MS sheet cover including 40x40x6 mm thick angle iron frame fixed on 150 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate) as in including 25x6 mm flat iron hold fasts, handles, hinges with locking arrangement and applying two coats of synthetic enamel paint over one coat of red oxide primer to steel surface including excavation earthwork in hard / dense soil returning filling in. disposal of surplus soil to a distance n. exc 50 m outside MD land etc, complete all as specified and directed |
| 91 | M&L for construction valve chamber with bricks masonry of size 600x600x 600 mm (internal dimension) with 150 mm thick foundation using PCC 1:4:8, type D2, using 40 mm graded stone aggregate, 230 mm thick brick walls built in CM 1:6, 10 mm thick plaster in CM 1:4 on internal and external surface (above ground level), finished even and fair without using extra cement 5mm thick MS sheet cover including 40x40x6 mm thick angle iron frame fixed on 150 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate) as in including 25x6 mm flat iron hold fasts, handles, hinges with locking arrangement and applying two coats of synthetic enamel paint over one coat of red oxide primer to steel surface including excavation earthwork in hard / dense soil returning filling in. disposal of surplus soil to a distance n. exc 50 m outside MD land etc, complete all as specified and directed |
| 92 | Supply only hacksaw blades heavy duty 12 inch x 1/2 inch x 0.025 inch 18 TPI |
| 93 | Supply only Microfiber Cleaning Cloths, 30x30cms 220 GSM Multi-Colour, Highly Absorbent Lint and Streak Free Multi -Purpose Wash Cloth (as per sample) |
| 94 | Supply only bearing grease Heavy duty and high performance AP-3 in 10 kg container.Make: Castrol, Veedol. |
| 95 | Supply only HOLDTITE PLUS PTFE TAPE used for pipe fittings & fixing water Leak - 12mm x 10 meter |
| 96 | Supply only pidilite holdtite white liquid sealant for GI pipe in 500 gram container. |
| 97 | Supply only stainless steel reinforcement Asbestos packing gland size 8, 10, 12, 16 mm and 6 m long. |
| 98 | NOTE: AMOUNT OF SCHEDULE OF CREDIT Rs. 3,41,527.50 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender