Tender For Repairs To Joinery, Cupboard Works, Etc. In Certain Buildings Of Zone C Area Under Age B/R (N) No I Of Ge (North) Secunderabad.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Cupboard Works, Etc. In Certain Buildings Of Zone C Area Under Age B/R (N) No I Of Ge (North) Secunderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 sqm each complete all as specified and directed |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and directed |
| 3 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each,complete all as specified and directed |
| 4 | S&F Providing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Complete all as specified and directed |
| 5 | S&F Providing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) →specification & drawings given in Section 8 of MES Schedule Part-II 2004 as applicable complete all as specified and directed. |
| 6 | S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer,complete all as specified and directed |
| 7 | M&L PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats. complete all as specified and directed |
| 8 | S & F 35 mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc,complete all as specified and directed |
| 9 | S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as specified and directed |
| 10 | S & F 30 mm IInd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc,complete all as specified and directed |
| 11 | S&F in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 12 | S&F 100 mm size butt hinges SS with SS hinge pin, extruded, anodised, type C-21 complete all as specified and directed |
| 13 | S & F 100 mm size MS Butt hinges cold rolled complete all as specified and directed. |
| 14 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt, complete all as specified and directed |
| 15 | S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed |
| 16 | S & F 300 mm long Mild steel sliding bolt, plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and directed. |
| 17 | S&F in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as specified and directed. |
| 18 | S&F in repairs 2nd class hard wood plain small fittings such as brackets of any type , latch and hinge blocks, shaped door and window stopes and the like , including all necessary labours, articles not exc 200cum each ,including butt hinges of 50mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and directed |
| 19 | M & L Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer complete all as specified and directed. |
| 20 | S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed. Complete all as specified and directed |
| 21 | S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed complete all as specified and directed |
| 22 | S & F Figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed complete all as specified and directed |
| 23 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 24 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and directed |
| 25 | M&L 2 nd class hard wood plain fillets of sectional area exc 6 sqcm & not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face. complete all as specified and directed. |
| 26 | M&L 2nd class hard wood plain fillets of sectional area exc13 sqcm & not exc 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face and complete all as specified and directed. |
| 27 | M&L in repairs 18mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with screws to timber frame work Complete all as specified and directed. |
| 28 | M&L in repairs 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with screws to timber frame work complete all as specified and directed |
| 29 | M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed |
| 30 | M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging,complete all as specified and directed |
| 31 | S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40 mm width of flap fixed with screws as in repairs complete all as specified and directed. |
| 32 | S&F 50 mm size butt hinges aluminium alloy,extruded with galvanised mild steel hinge pin, anodised, type E-22. complete all as specified and directed |
| 33 | S&F in repairs 100 mm size hasp and staple, safety type, stainless steel with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 34 | S&F in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and directed |
| 35 | S&F UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tensile strength - 43.9N/sqmm, % Elongation at break - 215, Tensile moduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperture and including Dismantling/Cutting of existing steel windows with the help of gas cutter and make good and match with existing walls at any height complete all as as per manufacturers instructions,as specified and directed by Eng-in-charge. |
| 36 | S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc,complete all as as per manufacturers instructions,as specified and directed by Eng-in-charge. |
| 37 | S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc complete all as as per manufacturers instructions,as specified and directed by Eng-in-charge. Make: SINTEX/ RAJSHRI/ NANDI |
| 38 | S & F in repairs 25 mm bore stainless steel curtain rod thickness not less than 3mm and weight not less than 2.25 kg/mtr confirming to SS-304 grade complete all as specified and directed |
| 39 | S & F in repairs for stainless steel curtain rod brackets (decorative type) confirming to SS-304 grade suitable for curtain rod of 25mm dia , complete all as specified and directed |
| 40 | M&L Mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and directed |
| 41 | S&F Mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed |
| 42 | M&L Preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 43 | S & F E Grid in repairs suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc including dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc. Complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender