Tender For Construction Of New Mini Water Supply Scheme At Mangaldai (Phe) Division Office C Us Under Mangaldai Division
Tender Value
34.56 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
25 days left
EMD
69137
Bank guarantee accepted
Document Fee
691
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darrang → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Mini Water Supply Scheme At Mangaldai (Phe) Division Office C Us Under Mangaldai Division
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling G.I. pipes (external work) including excavation and refillingtrenches after taking out the pipes, manually/ by mechanical meansincluding stacking of pipes within 50 metres lead as per direction ofEngineer-in-charge. Above 40 mm nominal bore |
| 2 | Dismantling of C.I. sluice valve including stacking of useful materials withina lead of 50 metres.Up to 150 mm diameter |
| 3 | Providing and fixing G.I. pipes complete with G.I. fittings including trenchingand refilling etc. 65 mm dia nominal bore |
| 4 | 50 mm dia nominal bore |
| 5 | 32 mm dia nominal borer |
| 6 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cementmortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with a floating coat of neat cement complete asper standard design : With common burnt clay F.P.S.(non modular) bricks |
| 7 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :65 mm nominal bore |
| 8 | 50 mm nominal bore |
| 9 | Providing and fixing brass bib cock of approved quality :20 mm nominal bore |
| 10 | Providing and fixing brass stop cock of approved quality :20 mm nominal bore |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangementand making necessary holes for inlet, outlet and overflow pipes but withoutfittings and the base support for tank. |
| 12 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) :100 mm diameter Class II |
| 13 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA)conforming to IS - 1536 : 100 mm dia pipe |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings including trenchingand refilling etc. 50 mm dia nominal bore |
| 15 | 65 mm dia nominal bore |
| 16 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :65 mm nominal bore |
| 17 | Providing and fixing gun metal non- return valve of approved quality (screwedend) : 65 mm nominal bore, Vertical |
| 18 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks |
| 19 | Elbow 90° for 54 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard |
| 20 | Sleeve/Slip Coupling / Socket 54 mm outer dia SS pipe of grade316L as per IS 6911:2017 and conforming to EN-10312 standard |
| 21 | Supplying,installation,fitting,& testing and commmissioning, of electric driven 3-phase(for 5HP/7.5HP/10HP/12.5HP/15HP) / Single phase (for 1HP/2HP/3HP pump) centrifugal pump set of approved make with bronze impeller of suitable diameter with G.I suction pipe, suction stainer ,non-return valve, delivery piping up to suice valve all complete. Pump, motor, stater,panel board ,etc from the manufacturer shall have to be submitted 5HP 3 phase |
| 22 | Supplying,installation,fitting,& testing and commmissioning, of electric driven 3-phase(for 3HP/5HP/7.5HP/10HP/) / Single phase (for 1HP/2HPpump) withbronze impeller of suitable diameter all complete.The pump set should be coupled with wet type submersible electric motor drive of adequate power suitsable for operation at 230V/415 V, 50 Hz input power including supply of steel cable rope G.I Coloum pipe,suction stainner,sluice valve ,....shall have to be submitted. 3 phase 3HP pump |
| 23 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m : All kinds of soil |
| 24 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 20 mm nominal size derived from natural sources) |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars |
| 26 | Centering and shuttering including strutting, propping etc. and removal of formfor Foundations, footings, bases of columns, etc. for mass concrete |
| 27 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 28 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 29 | Suspended floors, roofs, landings, balconies and access platform |
| 30 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 31 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 32 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 33 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood |
| 35 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood35 mm thick shutters |
| 36 | Cement plaster 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 37 | Providing and applyingwhite cement sed putty of average thickness 1 mm of approved brand and manufacturer over the plaster wall surface to prepared the surface even and smooth complete |
| 38 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 39 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coatwith cement primer |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangementand making necessary holes for inlet, outlet and overflow pipes but withoutfittings and the base support for tank. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender