Tender For Providing And Fixing Of Various Types Of Sign Boards On V-4 Roads Under Jurisdiction Of B And R Wing, M.C., Chandigarh
Tender Value
57.05 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
3 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Various Types Of Sign Boards On V-4 Roads Under Jurisdiction Of B And R Wing, M.C., Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of cautionary sign board, Pedestrain crossing of size 600x600x600mm equilateral triangle (comer rounded off) consisting of ACP sheet 3mm thick fixed to back support frames of size of angle iron 25x25x5mm with aluminium. The retro reflective high density Type XI sheet will be provided on base of sign plate and definition plate having size 600x300mm. Red reflective border 65mm wide shall also fixed on sign plate and black reflective shall be used as siga on sign plate and lettering on the definition plate. Both sign plate and definition plate is to be fixed on 3500mm long vertical post of M.S. angle iron 50x50x5mm with anchorage piece of same angle of size 9\\" long embedded in C.C. 1:2:4 in the block of 1'5\\"x1'5\\"x 2' with plate is to be processed by enamel paint to make it weather the and two coats of synthetic enamel paint of approved brand of white and black colour altermate bands of 300mm long over one coat of priming coat to vertical post, complete in all respect and to the entire satisfaction of Enginner in charge, (EER-I +EER-II+ EER-III= 131+106+117= 354) (screen printing required) (Gap in Median+ Rumble Strip + Pedestrian + Round About Ahead) |
| 2 | P/F Mandatory/Regulatory sign board for Speed Limit Boards having 600mm dia and the definition plate of size 600mmx300mm made out of 3mm, thick ACP sheet fixed to back support frames of size of angle iron 25x25x3mm with aluminium. Alloy steel rivets of appropriate size with suitable intervals. The front side of both plates shall have retro reflective high intersity in encapsulated reflective sheeting type XI with screen printed messages (legends, letters, numerals etc) and borders as per IRC:67-2001 code of practice for road signs and are to be fixed by welding/ nut and bolts on 3500mm long vertical post made of M.S. angle iron 50x50x5 mm with anchorage piece of same angle of size 9\\" long embedded in C.C.1:2:4 in the block of 1'5\\"x1'5'x 2' with plate is to be processed by enamel paint to make it weather the and two coats of synthetic enamel paint of approved brand of white and black colour alternate bands of 300mm long over one coat of priming coat to vertical post, complete in all respect and to the entire satisfaction of Enginner in charge. (EER-I +EER-II+ EER-III= 41+0+75= 116)(screen printing required) (Speed Limit) |
| 3 | Supplying and fixing 750mm equilateral Octagonal shape board having singnage \\"STOP\\" made over 3mm thick ACP sheet fixed to back support frame of M.S, angle of size 25mm x 25mm x 3mm. The ACP sheet shall be fixed with steel rivets of appropriate size with suitable intervals. The front side of signage plate shall have retro reflective micro primatic sheet type XI with screen printed messages lagends on clear overlay 1 No vertical stand post of 3500mm long of M.S. angle of size 50x50x5mm thick with anchorage piece of 225mm long of sme angle. The frame vertical post shall be painted with two coats of 1st quality synthetic enamel paint over one coat of pink primer. The board shall be embedded in CC 1:2:4 block of size 300x300x450mm complete in all respect and to the entire satisfaction of Engineer-in-charge.(EER-I +EER-II+ EER-III= 48+27+28= 103) (screen printing required) (Stop Sign) |
| 4 | Providing and fixing of informatory sign board, rectangular of size 600x800 mm consisting of ACP Sheet 3 mm thick fixed to back support frames of size of angle iron 25x25x5mm with aluminium. The retro reflective high density Type XI sheet will be provided on base of sign plate. Reflective border 65mm wide shall also fixed on sign plate and black reflective shall be used as sign on sign plate and lettering on the main plate. Both sign plate and definition plate is to be fixed on 3500mm long vertical post of M.S, angle iron 50x50x5mm with anchorage piece of same angle of size 9\\" long embedded in C.C.1:2:4 in the block of 1'5\\"x1'5\\"x 2' with plate is to be processed by enamel paint to make it weather the and two coats of synthetic enamel paint of approved brand of white and black colour alternate bands of 300mm long over one coat of priming coat to vertical post complete in all respect and to the entire satisfaction of Enginner in charge. complete in all respect and to the entire satisfaction of Enginner in charge.(EER-I +EER-II+ EER-III= 33+30+10= 73) (screen printing required) (Bus Stop) |
| 5 | Providing and fixing of informatory sign board, rectangular of size 1200x360 mm consisting of ACP Sheet 3 mm thick fixed to back support frames of size of angle iron 25x25x5mm with aluminium. The retro reflective high density Type XI sheet will be provided on base of sign plate. Reflective border 65mm wide shall also fixed on sign plate and black reflective shall be used as sign on sign plate and lettering on the main plate. sign plate to be fixed on two no. 3500mm long vertical post of M.S. angle iron 50x50x5mm with anchorage piece of same angle of size 9\\" long embedded in C.C.1:2:4 in the block of 1'9\\"x1'9\\"x 2'9\\" with plate is to be processed by enamel paint to make it weather the and two coats of synthetic enamel paint of approved brand of white and black colour alternate bands of 300mm long over one coat of priming coat to vertical post, complete in all respect and to the entire satisfaction of Enginner in charge. (EER-I +EER-II+ EER-III= 32+8+37= 77) (screen printing required) (You are here City Map Type Sign) |
| 6 | Providing and fixing Keep Left Board / Divider Sign Board have top circular plate of dia 450mm with definition plate of size 300 × 100mm and the bottom plate of size 300 x 900mm both made out of 3mm thick ACP sheet, fixed to back support frames of MS Flat of size 50 x 5 mm. The front side of both ACP plate shall be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - XI in blue and red, white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class - 2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets to back support frame of M.S. Flat 25 x 5mm along with theft resistant measures, mounted and fixed with welding / nut and bolts to 2200mm long MS angle 65 x 65 x 6mm having anchorage piece 225mm long made out of MS Flat of size 25mm × 5mm embedded in ground with cement concrete 1:2:4 block size 300 x 300 x 450mm. The steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer. Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts, making pit, lifting of malba etc. complete as per drawing, specification and direction of Engineer-in-charge. (EER-I +EER-II+ EER-III= 106+38+139= 283) (screen printing required) (Keep Left+ Hazard Marking) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender