Tender For Repair And Renovation Of 2 No. Fountains In Sector-15 And 2 No. Fountains In Sector-24 & Other Allied Works In Sector-15 & 24, Chandigarh, Under Landscaping
Tender Value
31.74 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
63482
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of 2 No. Fountains In Sector-15 And 2 No. Fountains In Sector-24 & Other Allied Works In Sector-15 & 24, Chandigarh, Under Landscaping
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly (DSR No. 2.8.1) Dressed Size 50mtrsx0.60x0.60mm = 18.00 Cum |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto - (DSR No. 2.25). |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm DSR 15.23.2 |
| 4 | P/L cement concrete - all works upto plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) (DSR No. 4.1.10) |
| 5 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.(DSR 11.37) |
| 6 | SUBMERSIBLE LIGHTS (NZM) High quality long lasting, Under water lights. MAKE Aqua Graphics, BODY & COVERING ABS body with double sealed, Silicone gaskets, NUTS & BOLTS Stainless .Steel, COLOR FILTERS Clear, BEAM LAMP LED 9 w/12v.Tested IP68, MOUNTING TYPE NOZZLE complete . |
| 7 | LIGHT FIXTURES SS 304 fine finished complete with buff polishing.1ST GRADE STEEL FABRICATION SIZE APL/S with SS nut bolts complete. |
| 8 | LIGHTING CONTROLER Self standing / wall mounted cubicle made of 1.6 mm CRCA sheet, enclosed complete , It houses light command editor in 12 v DC with SMPS Hi Brite power supply and controller for diffusing colors with 12 programs , creating 7 colors with different timings. ( For 10 lights ) Make AQUA DM. |
| 9 | ELECTRICAL CABLE Electrical multistoried copper cable 1.5 sqmm X 4 core unarmored , along with PVC protection conduit 20mm along with pvc clamps , Make Standard/ Havel/ Shalimar/ Polycap complete. |
| 10 | SUBMERSIBLE JOINTS IP68 Waterproof joints with 2mm rubberized waterproof tape along with 0.13mm thick insulation tape with good electrical and mechanical strength to prevent leakage of current in water complete. |
| 11 | Providing & fixing of Brass Ball valves of various sizes complete in all respects to the entire satisfaction of EIC.1x 1/2” i/d |
| 12 | 2” i/d |
| 13 | 1x 1/4” i/d |
| 14 | ½” i/d |
| 15 | Providing & fixing 2” PVC pipe complete in all respects to the entire satisfaction of EIC. NSI. |
| 16 | Providing & fixing Pneumatic hose pipe 38.00mm Make: INDO Complete in all respects. |
| 17 | Providing & fixing of Brass Nozzle ½” i/d complete in all respects to the entire satisfaction of EIC. NSI. |
| 18 | Providing & fixing of Brass Nozzle 3/4” i/d complete in all respects to the entire satisfaction of EIC. NSI. |
| 19 | Providing & fixing of water column Nozzles complete in all respects to the entire satisfaction of EIC. NSI. |
| 20 | Providing & fixing of fountain panel i/c wiring complete in all respects to the entire satisfaction of EIC. NSI. |
| 21 | Providing & fixing of fountain electrical MS panel box i/c cost of electrical cable wire fixing , 16 G.M.S. sheet welded on MS angle iron frame size: 50mmx50mmx6mm with 4 no. of legs of angle iron same size each. The panel shall be painted with two coats of P.O. grey paint after applying one coat of grey oxide. The legs of panel shall be embedded in th e 1:2:4 Cement Concrete mixture by digging 1’ deep pit of 1’ dia, as per site requirement complete in all respects to the entire satisfaction of EIC. Size: 3’x3’. |
| 22 | Providing & laying of panel wire 1.5mm flexible cable including cost of thimble, nut bolts complete in all respects as per site requirement Make: L&T/BCH. |
| 23 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR No. 13.91). |
| 24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR No. 13.80) |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). (DSR No. 14.1.1). |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR 13.61.1). |
| 27 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR No. 10.25.2). |
| 28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories& stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR No. 10.28). |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(DSR No. 13.46.1). |
| 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR No. 13.41.1). |
| 31 | Providing & fixing of best Indian make : L&T/Havells Switch Board Reins 210mmx135mmx50mm indoor complete in all respects. |
| 32 | Providing & Fixing of Exhaust Fan 12” of reputed make s.a. Orient heavy duty complete as per site satisfaction of EIC. |
| 33 | Providing & Fixing of LED tubelight make Surya complete as per site satisfaction of EIC. |
| 34 | Providing and fixing of contactor block with NONC 25/40 Amp. Make: L&T/BCH complete in all respects. |
| 35 | Providing & fixing of Changeover 32/64/100 Amp. complete in all respects. |
| 36 | Providing & fixing Kit-Kat Fuse 200Amp. Complete in all respects Make L&T. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender