Tender For Water Supply Scheme At Khaswarang Chowmuhani Under Bubagwra Vc Of Belbari Rd Block Under The Jirania Pwd(Dws) Sub-Division, Jirania / Sh: Construction Of 01 (One) Nos. Sbdtw Scheme Size (100 Mm X 100 Mm) Along With Installation Of Pump Set
Tender Value
2.03 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
0 days left
EMD
4065
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water Supply Scheme At Khaswarang Chowmuhani Under Bubagwra Vc Of Belbari Rd Block Under The Jirania Pwd(Dws) Sub-Division, Jirania / Sh: Construction Of 01 (One) Nos. Sbdtw Scheme Size (100 Mm X 100 Mm) Along With Installation Of Pump Set And Other Allied Works During The Year 2026-27. (Deposit Work).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 2 | i) 40 mm dia |
| 3 | Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge. |
| 4 | i) 40 mm dia |
| 5 | ii) 50 mm dia |
| 6 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge. |
| 7 | i) 40 mm dia |
| 8 | Providing & shrouding of the deep tube well assembly with washed pea gravels (2.0 - 4.75 mm effective size) as per specification (IS: 4097) and direction of the Engineer - in - charge. A. With contractor's rig |
| 9 | i) With Pea gravels obtained from Durgapur, West Bengal. |
| 10 | Providing and fixing of UPVC end cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. i) 100 mm dia |
| 11 | Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge. |
| 12 | i) 125 mm dia |
| 13 | Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, reservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. asrequired to maintain the pilot hole properly as per specification and direction of the Engineer - in - charge. |
| 14 | a) 100 mm dia |
| 15 | Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer - in - charge. |
| 16 | a) From 100 mm dia pilot hole to 250 mm bore hole |
| 17 | Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer - in - charge. (A) 'CM' Casing pipe - |
| 18 | (i) 100 mm dia |
| 19 | (B) RS pipe - |
| 20 | (i) 100 mm dia |
| 21 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge. |
| 22 | Supplying & installation of water lubricated submerssible pump of Duke make (Model No- DSP4RFH05) having capacity 1500 GPH at total head upto 45.00 mtr coupled with submerssible motor 2HP suitable for 240 volt (+10% variation) single phase 50HP AC supply DOL starting method to run at 2880 RPM along with 35.00 mtr 2.55 sqm, PVC and 40 mm dia G.I pipe upto 100 ft. (30 mtr.) etc. complete as per direction of the Eng- in-charge. (required 40 mm dia G.I pipe will be supplied by the Deptt. at free of cost) |
| 23 | Supplying & fitting, fixing of MS box of having size 60cm X60cm X 45 cm with sloped roof and front shutter with locking arrangement fitted with 4 (four) no 10mm X 10mm X 6mm MS angle of 1.60 mtr long including providing and fitting wooden board inside the box having size 55cm X 55cm X 1inch thick for fitting all the electrical features like starter, Main switch & including cost of necessary painting & embeding the box with cc block size 30cm X 30cm X 60 cm with 1:2:4 (1 cement:2 river sand: 4 jhama brick aggregate 20 mm nominal gauge) as per direction of the Engineer in Charg. (starter, Mainswitch will be paid separately) |
| 24 | Supplying & fitting, fixing of single phase motor starter pannel unit 3 HP capacity comprising with 2 pole conductor, overload relay, capacitor, volts meter of BCH/L&T make with necessary copper wire etc. complete as per direction of the engineer in charge. |
| 25 | Supplying & fitting fixing of 32 Amps Single Phase Main Switch of BCH/L&T/Heavels make with necessary copper wire complete as per direction of the Engineer-in-Charge. |
| 26 | Providing and fitting fixing G.I. pipe (medium class) conforming to IS : 1239 for column pipe assembly for installation of submersible pump motor as per direction of the Engineer-in-charge. |
| 27 | i) 40 mm NB |
| 28 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete (but excluding the cost of specials like bend, tees etc. which will be paid separately) as per CPWD specification and direction of the Engineer - in - charge.A. Class - 3 ( working pressure 6.0 kg / cm2) |
| 29 | i) 40 mm OD |
| 30 | Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 31 | i) 40 mm dia |
| 32 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 33 | i) 40 mm dia |
| 34 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A. External work. |
| 35 | i) 40 mm dia nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender