Tender For Repairs To Floor, Roof And Periodical Services To Bldg No. 1014,476/T, 370, 295, 490, 331, 108, 1001, 643, 450, 644, 360, 851, 231, 43, 209, 821 Inside Cordite Factory Aruvankadu.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
1.73 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Floor, Roof And Periodical Services To Bldg No. 1014,476/T, 370, 295, 490, 331, 108, 1001, 643, 450, 644, 360, 851, 231, 43, 209, 821 Inside Cordite Factory Aruvankadu.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing. |
| 2 | Dismantling of Battens for tiles, shingles etc, of spaced exc. 15cm any size including tilting fillets. |
| 3 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 5 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings. |
| 6 | M&L forof 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with coach screws. |
| 7 | Dismantling boarding, any description, fixed in any position with nails |
| 8 | Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed works) |
| 9 | Laying only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry (Except tiles). |
| 10 | Laying only Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 (Except tiles). |
| 11 | S & F of Galvanised, corrugated mild steel sheeting thickness 0.63 mm with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 12 | M&L for clean sawn battens at 30cm centres, of size exc. 5 Sq.cm and n.exc. 15 Sq.cm, using second class hardwood on roof, as directed. |
| 13 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 14 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified |
| 15 | S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in,roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | M&L for Painting on new steel surfaces of any description, over 10cm in width or girth,not otherwise described with one coat of Zinc Chrome primer and 02 coats of synthetic enamel paint (ordinary tint) including preparatory works as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 17 | M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width, Type C1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4, complete as directed. |
| 18 | S & F PVC (SWR) pipes (75 mm bore) single socketed, in any length with rubber ring joints, laid in trenches or in floors as directed. |
| 19 | S & F PVC (SWR) bends 75 mm bore as directed |
| 20 | S & F PVC (SWR) pipes (110 mm bore) , single socketed, in any length with rubber ring joints, laid in trenches or in floors as directed. |
| 21 | S & F PVC (SWR) bends 110 mm bore as directed |
| 22 | S & F PVC (SWR) bends 110 mm bore provided with access door. |
| 23 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 24 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 25 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 12 cm deep and getting out in hard/dense soil as directed. |
| 26 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil as directed |
| 27 | Rough excavation in Hard/dense soil not exceeding 1.5 m deep and getting out and shifting the excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed. |
| 28 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 29 | Laying of Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (Except material) as directed. |
| 30 | M&L for providing cement concrete type B-1, 1:2:4 (20mm graded aggregate), 70mm thickness as directed. |
| 31 | M&L for Chequered cement concrete tiles with grey pigment cement and pigment, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed of cement plaster 1:6, 20mm thick. |
| 32 | M&L for Reinforced concrete pipes, class NP2, 200 mm bore laid and jointed complete with collars |
| 33 | M&L for Rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 and additional thickness is provided as floating/setting coat as directed |
| 34 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc. as directed |
| 35 | S & F vitreous China Squatting pan \\"Orissa\\" pattern size 580X440 mm white with integral foot rests, PVC (SWR) P trap bore in 110 mm etc completes including proven of lime concrete bedding etc fixed in repairs as directed. |
| 36 | S&F of Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing in repairs as directed |
| 37 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colour including M&L for Screed bed of 15mm thick using cement plaster 1:4 as directed |
| 38 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including M&L for screed bed of 15mm thick cement plaster 1:6 as directed |
| 39 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including M&L for screed bed in cement plaster 1.4, 15mm thick as directed |
| 40 | M&L for cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required (Superficial area exc 400 Sq.cm but N exc 0.10 Sq.m ) as directed |
| 41 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls as directed. |
| 42 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified, Outer dia 25 mm as directed. |
| 43 | S & F 20 mm Bore dia. Tubes, 'Medium Grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 44 | S & F 15mm Bore dia. chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as directed |
| 45 | S&F of Stop valves, 15 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type, chromium plated fancy type as directed |
| 46 | S & F of PVC connections 15mm size with PTMT nuts of length 450mm |
| 47 | M & L PVC (SWR) diameter of outlet 75 mm floor trap, plain with grating including jointing with solvent cement as directed |
| 48 | S & F of Vitreous China wash basin, white, flat back, size 550x400mm including brackets and Waste fittings 40 mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs as directed |
| 49 | S&F of 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 50 | S&F of low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., Bore 50 mm, as directed. |
| 51 | S&F of PVC valveless, syphonic action type, 10 litres flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Flushing cistern and flushing pipe fixed in repairs |
| 52 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild msteel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 53 | Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 54 | S&F of Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, using 2nd class Hardwood as directed |
| 55 | Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc. 4 sq.m each with shutters (without taking off shutters from the frames) and removing to CW store as directed |
| 56 | Repiars and resecuring without taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frames) |
| 57 | S&F of Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, 30mm thick, using 2nd Class Hardwood as directed.. |
| 58 | S&F of Butt hinges 125 mm, medium weight, cold rolled mild steel as directed |
| 59 | S&F of Mild steel barrel tower bolts length 200 mm, stove enamelled black, with bright bolt as directed |
| 60 | S&F of Mild steel pressed handles, oval type, stove enamelled black size 150mm as directed. |
| 61 | S&F of Mild steel sliding door bolts length 200mm plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate as directed |
| 62 | S&F of Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane thickness 4.0mm thick as directed |
| 63 | S&F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 as directed. |
| 64 | M&L for Plywood, 6mm thick, 5 ply grade BWP, type BB fixed with screws to timber frame work/metal frame work fixed in ceiling, flat or sloping as directed |
| 65 | S&F of Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats conforming to Fe.290.Gde-E-165 as directed. |
| 66 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as directed. |
| 67 | S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 68 | M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite as directed |
| 69 | Providing edge moulding to 18-20mm thick granite stone any description stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 70 | S&F of Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, size 100 mm type C-21 |
| 71 | S&F of Aluminium anodised, barrel tower bolts of extruded section length 150mm. |
| 72 | S&F of Extruded aluminium alloy handles fabricated type anodised size 100 mm. |
| 73 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 74 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 75 | M & L for Rendering 12 mm thick on walls on fair faces of brick work or concrete surface in Cement plaster (1:4) and Chalk whiting, on plastered surfaces, preparatory to distempering as directed. |
| 76 | M & L for Rendering 12 mm thick on ceilings on concrete surface in Cement plaster (1:4) and Chalk whiting, on plastered surfaces, preparatory to distempering as directed. |
| 77 | M&L for providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth. (Brand: Birla Wall Care, JK, Asian, Nerolac as approved by the EIC to be used). |
| 78 | M & L for Distempering on ceiling with white or tinted distemper oil emulsion, 02 coats including preparatory works on old ceiling surfaces as directed. (Make: Asian / Dulux/ Nerolac as approved by the EIC to be used). |
| 79 | M & L for Distempering on old walls with white or tinted distemper oil emulsion, 02 coats including preparatory works on old wall surfaces as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 80 | M & L for Painting on old wooden surfaces of any description, over 10cm width or girth, using synthetic enamel paint two coat including preparatory works as directed and approved by Engineer in Charge. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 81 | M & L for Painting on old steel surfaces of any description, over 10cm width or girth, using synthetic enamel paint two coat including preparatory works as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 82 | M & L for Distempering on new walls with white or tinted distemper oil emulsion, 02 coats on new wall surfaces as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 83 | M & L for Painting on new wooden surfaces of any description, over 10cm width or girth, using synthetic enamel paint two coat, one coat pink primer including preparatory works as directed and approved by Engineer in Charge. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 84 | Material & Labour for applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparatory works on old surfaces as directed. [Make: (Asian Apex Ultima)/ (Dulux weathersheild Max)/ (Nerolac Excel Total) as approved by the EIC to be used]. |
| 85 | M & L for painting old plastered wall Surfaces plain or moulded, description over 10cm girth or width, not otherwise described, using synthetic enamel paint two coat including preparatory works as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 86 | M & L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work as directed. |
| 87 | M&L for Writing letters, using thick enamel paint (Block, Roman, Italic or Indian) 15cm high, as directed. |
| 88 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed(soil). |
| 89 | Providing precast cement concrete, type-B1,1:2:4 mix ratio using 20mm graded aggregate in landings, cover slabs (for man holes / Drainage etc.), shelves and similar articles with plain faces including formwork and finishing set in Cement mortar 1:4 as directed. |
| 90 | M&L for Cement concrete in foundations, filling and mass concrete,Type D2,1:4:8 (40mm graded aggregate) |
| 91 | M&L for providing Cement concrete type B1, 1:2:4, 20mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 92 | M&L for TMT bars , but 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed. |
| 93 | Removing of lead sheet from floor having less than 3 mm thick and shifting to store section within 2 km distance |
| 94 | M&L for Roof tratement using by following method:- (a). Surface preparation: Cleaning the surface well with wire brush or grinder to level the uneven surface and sharp points, wash the slab to remove dust, dirt, oil, grease etc, , cut and open all concrete cracks which are more than 0.50mm in the width and upto 10mm and filling the crack with cement mortar mixed with modified styrene butadiene latex (Supplied as a ready to use bonding agent in liquid form to repair of spalled concrete, floors, etc - Dr. Fixit Pidicrete URP or equivalent as approved by EIC).(b). Fillet Treatment: Providing and laying of 50mm X 50mm angle fillets at the junctionof slab and vertical walls prepared with cement sand mortar in the ratio of 1:3 admixed with 10% modified styrene butadiene latex (Supplied as a ready to use bonding agent in liquid form to repair of spalled concrete, floors, etc - Dr. Fixit Pidicrete URP or equivalent as approved by EIC) by eight of cement.(c). Water Proof Coating: Providing and applying one coat of Water based primer composed of Acrylic emulsion polymer (Dr. Fixt Prime Seal or Equivalent as approved by EIC) and 02 coats of Single component cold applied Elastomeric water proof coating (Dr.Fixit Roof Seal or Equivalent as approved by EIC) with sandwiching 45 GSM geo textile with a time interval of 4 to 06 hours and extending the coat to the vertical surface if any (parapet / Concrete edge sides) as per manufacturer instruction. (d). work should carried out by the OEM authorised applicator / Dealer as approved by EIC. |
| 95 | Taking down carefully by copper / aluminium point wiring,(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc. |
| 96 | S & F of open wiring in PVC heavy duty conduit ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 1.5 sqmm 1100 V grade for each One light point or one fan point/bell/exaust etc from main lighting SDB and switchboard should be flush mounted as directed by site incharge Make.Havells/L&T/Finolex/ v-guard/philips |
| 97 | S & F of open wiring with copper flexible conductor cables FRLS, for one 3 pin socket outlet, 15A/5Amps, independent, with 2.5sqmm 1100V cable in PVC heavy duty ISI marked conduit including all accesories from SDB to individual sockets, switch/socket board to be mounted flush as directed by site incharge. Make.Havells/L&T/Finolex/ v-guard/philips |
| 98 | S&F of switch & Sockets combinations 2 in 1, 3pin 6 and 16 Amps Flush type Universal to be fixed on teak wooden box. Make: leader/Cona/Anchor/Alfa/philips. |
| 99 | Supply and Fixing of ISI marked Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body. Make:Leader/Cona/Anchor/Alfa/philips |
| 100 | Supply and Fixing of ISI marked Lamp holder, type with back plate suitable for PVC/Polycarbonate batten fittings as directed by the site incharge. Make:Leader/Cona/Anchor/Alfa/philips |
| 101 | S&F of of switch flush piano type 6 Amps, single pole, oneway to be fixed on teak wooden box. Make:Leader/Cona/Anchor/Alfa |
| 102 | S&F of 4 way DB 415 V TPN double door sheet metal enclousure for DB'S when MCBs to be used. Make:HAVEELS/L&T/SIEMENS |
| 103 | S&F of 12 way DB 240Vdouble door sheet metal enclousure for DB'S when MCBs to be used. Make:HAVEELS/L&T/SIEMENS |
| 104 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SPN, 32 Amps, in the MCB DB complete with connection testing and commissioning as directed by site-in-charge.Make: MDS/HAVELLS/INDO-ASIAN. |
| 105 | Supply & Fixing of Four pole RCBOs of rating 63 Amps, Earth leakage sensing of 30 mA with Overload & short circuit protection. |
| 106 | S&F of RCBOs for earth leakage, overload & short circuit protection, Double pole, 32 Amps, 30 mA as directed by site-in-charge. Make: MDS/HAVELLS/INDO-ASIAN. |
| 107 | Fixing LED tube light fittings 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. As per site -in-charge Make MDS/HAVELLS/INDO-ASIAN. Syska |
| 108 | Supply and laying or fixing or passing through pipe &Trench XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, 4core, cross-sectional area 16 sq. mm Cable laying termination with lugs,nuts and washers and fixing with proper size gland to be done as per IS and as directed by site In charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender