Tender For Arrangement Of Different Led Luminaries, Fans, Switch, Socket & Other Accessories For Ministers Quarter At 28, Raja Santosh Roy Road, Alipore.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
9 days left
EMD
15088
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Arrangement Of Different Led Luminaries, Fans, Switch, Socket & Other Accessories For Ministers Quarter At 28, Raja Santosh Roy Road, Alipore.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & delivery of 230 V, 50 Hz, single phase, 58 watts, 56\\" (1400 mm) Sweep, speed 300 rpm (minimum), A.C. Ceiling Fan and class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod (14 SWG & higher thickness), 2 nos. canopies, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 250 cu.m/min (minimum), without Regulator including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required. (Make:- Crompton Greaves/EPC/Orient) |
| 2 | Supply & delivery of 230 V, 50 Hz, single phase, 40 watts , 9\\" (230 mm) Sweep, speed 1350 rpm (minimum), A.C. Exhaust Fan and class of insulation: B, 3 nos. metal (Aluminium alloy) blades, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 650 cmh (minimum) including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required. (Make:- Crompton Greaves/EPC/Orient) |
| 3 | Supply and delivery of LED Recessed Down lighter (square) SMD with powder-coated pressure Die-cast Aluminium with high-transmission opal PMMA/ polycarbonate/ prismatic diffuser having uniform light distribution and construction as per IS : 10322. The driver rated output wattage should be 10% to 15% higher than lamp rating and efficiency Driver >80%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range 00 to 400 C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <10% , PF ≥0.9, IP20, CRI >80, life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends, CCT 6500°K, Maximum power consumption should not more than thespecified rating and Fixture shall be confirming to relevant BISstandards and trade mark certificate (T.C.). Manufactures WordMark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect and LED Chips of SMD Low to mid-power, as per requirement (LM-80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. System lumen efficacy ≥110 lm/Watt (Make : Signify/Crompton/Wipro) |
| 4 | 12-15 Watt |
| 5 | 18-20 Watt |
| 6 | Supply and Delivery of LED Recessed mounted Down lighter (Round) COB with powder-coated pressure Die-cast Aluminium with high-transmission opal PMMA/ polycarbonate/ prismatic diffuser having uniform light distribution and construction as per IS : 10322. The driver rated output wattage should be 10% to 15% higher than lamp rating and efficiency Driver >80%, Operating voltage AC 140-270 Volt,frequency 50/60 hz, Operating temp range 00 to 400 C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <10% , PF ≥0.9, IP20, CRI >80, life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K /6500°K, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect and LED Chips of SMD Low to mid-power, as per requirement (LM-80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. System lumen efficacy ≥110 lm/Watt (Make : Signify/Crompton/Wipro) |
| 7 | 12-15 Watt |
| 8 | Supply and delivery of LED Recessed Down lighter ( square) 2'x2' with powder-coated pressure Die-cast Aluminium/CRCA sheet body with high transmission opal PMMA/ polycarbonate/ prismatic diffuser having uniform light distribution and construction as per IS : 10322. The driver rated output wattage should be 10% to 15% higher than lamp rating and efficiency Driver >80%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range 00 to 400 C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , PF ≥0.9, IP20, CRI >80, life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect and LED Chips of SMD Low to mid-power, as per requirement (LM-80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. System lumen efficacy shall be as below:System lumen efficacy ≥135 lm/Watt (Make : Signify/Crompton/Wipro) |
| 9 | 27 - 30 Watt |
| 10 | Supply and delivery of 25 watt LED Strip (Length of 5 mtr) of Uncoated Synthetic material and Superior adhesive for easy installation and no. of LED 144 LED/mtr, system lumen efficiency 600 lm/mtr as per IS : 10322. The driver rated output wattage should be 10% to 15% higher than lamp rating and Driver efficiency >80%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range 0 degree to 40 degree C internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.9, IP20, CRI >80, life time (LED,Driver & electrical circuitry), of minimum 40000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends as per LM80 report, CCT 3000°K, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing, complete in all respect and LED Chips of SMD Low to mid-power, as per required (LM-80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. (Make : Signify/Crompton/Wipro) |
| 11 | Color WW/NW/CDL (Length of 5 mtr) |
| 12 | Supply of delivery of 12 Watt,B-22 LED Bulb.(Make- Philips/ Crompton / Wipro as approved by E.I.C) |
| 13 | Supply and delivery of 10W 2 Feet CDL (6500K) LED Batten light.(Make : Signify/Crompton/Wipro) |
| 14 | Supply and Delivery of 20 Watt (min.) 5700K/6500K, Decorative post top light with IP 65 protection, UV Resistant powder coated die-cast alluminium housing, Glare free and uniform illumination.(Make: Signify BGP 200 LED 26 CW PSU GR CPC SPD/Wipro eq./Crompton eq.) |
| 15 | Supply of delivery of 22 Watt LED Batten Tube light.(make-Philips/ Crompton / Wipro as approved by E.I.C). |
| 16 | Supply of delivery of Modular socket type 2 module fan regulator (Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 17 | Supply of delivery of Modular socket type 1 module fan regulator (Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 18 | Supply of delivery of 240 V, 16A Modular type 6 pin Plug Socket (Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 19 | Supply of delivery of 240 V, 6A Modular type 5 pin Plug Socket.(Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 20 | Supply of delivery of 240 V, 16 A 3 pin plug Top.(Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 21 | Supply of delivery of 240 V, 6A Modular type Switch (Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 22 | Supply of delivery of 240 V, 16A Modular type Switch (Make : Havells Crabtree Verona/Thomas or eqv model of Legrand /Anchor as approved by E.I.C). |
| 23 | Supply of delivery of 240 V, 50 Hz Wireless Remote Control Door Bell (Make : CONA Ross or equivalent model of Anchor/Phillips as approved by E.I.C) |
| 24 | Supply and delivery of 1.5 V Alkaline AAA battery .(Make- Duracell/ Eveready /Nippo as approved by E.I.C). |
| 25 | Supply and delivery of 1.5 V Alkaline AA battery .(Make- Duracell/ Eveready /Nippo as approved by E.I.C). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender