Tender For Repairing Of Icds Center At Mithapur Kora Para Within Ward No-8,Under Borough-I Of Asansol Municipal Corporation
Tender Value
1.25 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
6 days left
EMD
2515
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Icds Center At Mithapur Kora Para Within Ward No-8,Under Borough-I Of Asansol Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of plain cement concrete works,stacking serviceable materials at site and removing rubbish as directed withinaleadof75m.In ground floor including roof(a) upto 150 mm. thick |
| 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed |
| 3 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.i) Pakur Variety |
| 4 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement(ii) 25 mm. thick |
| 5 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](b) 20 mm thick plaster(1:6) |
| 7 | (b) 15 mm thick plaster (1:4) |
| 8 | (c) 10 mm thick plaster (1:4) |
| 9 | M.S.gate of Jail type as per approved design made of strong M.S. frame work ,intermediate stiffeners and round /square bars or angles. M.S.sheet (not less than 14gauge )gussets, cleats etc. including necessary riveting, bolting,welding ,locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. |
| 10 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats |
| 11 | Protective and Decorative Acrylic exterior emulsion paint of approved quality ,as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour,scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)a) Normal Acrylic Emulsion |
| 12 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. |
| 13 | c) Bend 87.5 degree(ii) 110 mm. Dia. |
| 14 | (a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 15 | A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface With other than hi-gloss of approved quality- iv) Two coats (with any shade except white) |
| 16 | GST 18 % =Rs. |
| 17 | Labour Cess 1 % = Rs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender