Tender For Installation Of 50Hp Sewage Submersible Pump-Set With Allied Accessories In Sumpwell At Tanners Colony Sps In Ac-29.
Tender Value
5.82 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
11700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 50Hp Sewage Submersible Pump-Set With Allied Accessories In Sumpwell At Tanners Colony Sps In Ac-29.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | Corrigendum | Date | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply of MS Black Steel Pipe 200 mm dia, 8 mm thick, conforming to IS:3589 Grade-330, suitable for sewage pumping applications. Pipe shall be tested, straight, free from defects and complete with all accessories. Approved make: Jindal/TATA or equivalent. |
| 2 | Supply of MS Bend 90° angle, 200 mm dia, fabricated from 8 mm thick MS pipe, suitable for sewage discharge line including welding preparation and anti-corrosion treatment. |
| 3 | Supply of MS Flanges 200 mm dia, drilled as per relevant IS standards, suitable for matching pipeline and pump delivery arrangement complete with machining and finishing. |
| 4 | Supply of Flat Three Core 16 Sq. mm PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motor suitable for working voltage up to 1100 Volts. Make: Havells/Gloster/Grandlay/DJB Approved Make. |
| 5 | Supply of High Tensile Nuts, Bolts & Washers of assorted sizes conforming to relevant IS standards suitable for pumps, valves, pipeline joints and mechanical connections complete in all respects. |
| 6 | Supply of Neoprene Rubber Gasket Sheet 3–5 mm thick, oil, water and sewage resistant, suitable for flange joint sealing, complete as required at site. |
| 7 | Fabrication, erection, testing and commissioning of complete 200 mm dia M.S. delivery arrangement for 50 HP sewage submersible pump set, comprising cutting, alignment, edge preparation and welding of M.S. pipes, bends and flanges; providing and fixing neoprene rubber gaskets, nuts, bolts and washers; lowering, positioning and erection of delivery line inside sump well and above ground level using suitable lifting equipment; providing RCC support pedestals/clamps as required; cutting/opening in sump/manhole walls and making good after installation; application of one coat zinc chromate/metal primer and two coats synthetic enamel paint on exposed M.S. surfaces; hydrostatic testing of delivery line, trial run, testing and commissioning of complete pumping system including all labour, T&P, welding electrodes, gas cutting, scaffolding, consumables, transportation, incidental works complete in all respects and as directed by Engineer-in-Charge |
| 8 | Laying of submersible cable and installation, testing & commissioning of 50 HP sewage submersible pump set, including laying of 3-core armoured submersible cable from LT control panel/starter to sump well through suitable route; dressing, clamping and securing of cable; providing cable terminations with suitable brass compression glands, copper/aluminium lugs, ferrules and identification tags; lowering, positioning and installation of 50 HP sewage submersible pump set in sump well with guide rails, lifting chain and associated accessories; connection of pump motor with control panel; coupling and jointing of delivery pipe arrangement complete with nuts, bolts and rubber gaskets; deployment of hydra/crane, chain pulley block and all required lifting equipment; provision of skilled labour, tools & tackles, consumables and safety measures; checking of insulation resistance, continuity and phase sequence; testing, trial run and commissioning of complete pumping system including satisfactory operation of pump, motor, control panel and associated equipment complete in all respects and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender