Tender For Improvement In Potable Water Delivery System At 512 Bps In Rajouri Garden, Ac-27.
Tender Value
12.70 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
2 days left
EMD
25500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement In Potable Water Delivery System At 512 Bps In Rajouri Garden, Ac-27.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | Corrigendum | Date | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Replacement of Pumpset by carrying out following works :-S/O horizontal split casing pump with impeller, Neck Ring and casing (CI), shaft & sleeve as per in standard fitted condition suitable for head 42 mtrs, discharge 180 m3/hr. Make: Kirloskar/ M&P/DJB approved make. |
| 2 | S/O IE2 Totally enclosed fan cooled squirrel cage flame proof Induction Motor of 40 HP, 1450 rpm, suitable for operation on 415+/-10% V, 3 phase, 50 Hz +/- 5% AC supply with ambient 45 to 50 degree Celsius ambient, Class F insulation with temperature rise limited to class B. Make :-Seimens/CG/KBL/DJB approved makes. |
| 3 | Supply of nuts bolts and washers as per site requirement. |
| 4 | Supply of neoprene packing as per site requirement. |
| 5 | Fabrication of MS Base Frame made from MS Chanel size 100mm x 50mm cross support and also fixing with MS vertical support U channel the foundation bolt to absorb the vibration and 4nos drilling as per existing site required. |
| 6 | Providing & Fixing of foundation bolt.@ 4nos. as per site requirement. |
| 7 | Fabrication of MS tapper of Suction and Delivery side with D/F for the Pumpsets as per site requirement. |
| 8 | S/F pressure gauge along with gauge cock, copper/ G.I. tubing soldering etc as required. Make: Febig / HGuru. |
| 9 | Making the foundation with the help of civil material of CC in ratio 1:2:4 with a one feet depth below the pump house surface level, Fixing of SS foundation bolts as in pocket by proper welding to MS jaal of RCC with proper support etc. @ 4nos. |
| 10 | Fixing of MS Base frame made out of MS channel on the CC foundation and tightening the foundation nut and bolt. With the help of heavy manual labour and tripod with all tools and tackles required to complete the job. |
| 11 | Installation and fixing of the new pump and motor on the base frame including couple the pump and motor with new coupling set as required, joining the pump with suction/ delivery line with the help of new MS tappers on both side. Fixing of existing Valves of Suction & delivery sides, Non return Valves, with nut & bolts, packing, etc. as required to complete the job. The job also include the laying of existing cable, making connection the motor from starter/panel etc. i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load in the presence of Engineer-in-charge with full satisfaction. |
| 12 | Replacement of UGR Suction line by carrying out following works :-Supply of MS Pipe 150 mm. Make :- TATA/Jindal Hisar/ DJB approved makes. |
| 13 | Supply of FOOT VALVE Cast Iron Flanged End 150 mm. Make :- IVC/Kirloskar/DJB approved makes. |
| 14 | Supply of nuts bolts and washers as per site requirement. |
| 15 | Supply of neoprene packing as per site requirement. |
| 16 | Dismantling the existing damaged suction line of pumpsets after isolating the electric supply from the LT Panel . Work including arranging all tools and tackles such as gas cutter, welding machine, grinder, etc required to remove/cutting the suction line rusted Nut & bolts and lifting the same with the help of heavy manual labour/hydra. |
| 17 | Fabrication of 150 mm dia. MS Pipe by welding of pipe & Flanges. Work including welding, cutting the 150 mm dia. MS pipe as per site requirement and welding the MS bend, flanges, etc as required. |
| 18 | Fixing of fabricated MS pipe of 150 mm dia. For Pumpset at both suction side with the help of heavy manual labour. Work including tightening the nut & bolts with Sluice Valve, Foot valve, rubber packing, washers, bend, foot valve, reducers, etc. and considering all safety measures while executing the work at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender