Tender For Construction Of Mini Community Sanitary Complex Near Pups At Samiyarpettai In Silambimangalam Panchayat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
3 days left
EMD
4830
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mini Community Sanitary Complex Near Pups At Samiyarpettai In Silambimangalam Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank with in initial lead lift in hard gravelly soil forfoundation etc. complete. |
| 2 | Plain Cement concrete 1:4:8 mix using 40mm ISS metal including all cost and conveyance of allmaterials to site and all labour charges etc complete. |
| 3 | Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site andall labour charges etc complete. |
| 4 | Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site andall labour charges etc complete.Above Basement |
| 5 | Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center |
| 6 | Above basment |
| 7 | Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and asdirected by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 8 | Supplying and Fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc., |
| 9 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work |
| 10 | Plastering with cement 1:5-12mm thick including cost and conveyance of al materials to site and all labour charges etc complete. |
| 11 | Finishing the top of roof with Best quality vitrified tiles of size 600mm x 600mm x 8mm of approved colour, shade & quality laid in CM 1:3 20mm thick and pointed with white cement mixed same colour pigments etc., and 2% of water proffing compound by weight of cement complying with standard specification. |
| 12 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 13 | Dadooing walls Plain Galzed tiles of size 150x150x6mm |
| 14 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. |
| 15 | Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc., complete as per standard specification. |
| 16 | Cost and supply of IWC |
| 17 | Cost and supply of EWC |
| 18 | Cost and supply of Wood plastic Composit door Door D1 0.75 m x 1.80m |
| 19 | Door SD 1.20 m x 1.80 m |
| 20 | Cost, Supply and fixing of Precast RCC Ring, including all cost and labour charges |
| 21 | Round Slab |
| 22 | Sanitary arrangements 110 mm dia pvc pipe |
| 23 | 110mm PVC Door Bend |
| 24 | 110mm PVC TEE |
| 25 | 2000 lit PVC tank |
| 26 | Towards Name board charges |
| 27 | Towards internal water supply arrangements (taps for toilet unit) and Electrification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender