Tender For Completion And Upgradation Of Atal Ji Community Centre Municipal Committee, Bawani Khera (Est. Cost Rs. 124.47 Lakh)
Tender Value
1.05 Crore
Estimated cost
Bid Submission
15 Jul 2026
7 days left
EMD
2.48 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhiwani → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion And Upgradation Of Atal Ji Community Centre Municipal Committee, Bawani Khera (Est. Cost Rs. 124.47 Lakh)
BOQ
| Sl. No. | Item Description |
| 1 | NS Item -Supply of Concealed box for fixing LED lightscomplete in all respects and as per directions of Engineer-incharge. |
| 2 | HSR Item 6.25.2-Providing and laying in position machinebatched and machine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping ofconcrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixturesin recommended proportions as per IS: 9103 to accelerate,retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineerin-charge. 2. All works above plinth level up to floor IV levelHSR Rate(Rs.) 4502.00 Through Rate |
| 3 | HSR Item 11.59-Providing and applying plaster of paris puttyof 2 mm thickness over plastered surface to prepare thesurface even and smooth complete.HSR Rate(Rs.) 71.00 Through Rate |
| 4 | HSR Item 6.25.1-Providing and laying in position machinebatched and machine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping ofconcrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixturesin recommended proportions as per IS: 9103 to accelerate,retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineerin-charge. 1. All works up to plinth levelHSR Rate(Rs.) 4464.00 Through Rate |
| 5 | HSR Item 10.63.2-Providing and laying vitrified floor tiles indifferent sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm includinggrouting the joints with white cement and matching pigmentsetc., complete. 2. Size of Tile 600x600 mmHSR Rate(Rs.) 987.00 Through Rate |
| 6 | HSR Item 6.30.6-Centering and shuttering including strutting,propping etc. and removal of form for 6. Columns, Pillars,Piers, Abutments, Posts and StrutsHSR Rate(Rs.) 262.00 Through Rate |
| 7 | HSR Item 10.58-Providing and fixing 1st quality ceramicglazed wall tiles conforming to IS : 15622 (thickness to bespecified by the manufacturer ) of approved make in allcolours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers ofsteps and dados over 12 mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixedwith pigment of matching shade complete.HSR Rate(Rs.) 538.00 Through Rate |
| 8 | HSR Item 11.18-18 mm cement plaster in two coats underlayer 12 mm thick cement plaster 1:5 (1 cement : 5 coarsesand) finished with a top layer 6 mm thick cement plaster 1:6(1 cement : 6 fine sand).HSR Rate(Rs.) 165.00 Through Rate |
| 9 | HSR Item 11.5.4-12 mm cement plaster of mix : 4. 1:6 (1cement: 6 fine sand)HSR Rate(Rs.) 104.00 Through Rate |
| 10 | HSR Item 4.2-Clearing grass and removal of the rubbish up toa distance of 50 m outside the periphery of the area cleared.HSR Rate(Rs.) 3.00 Through Rate |
| 11 | HSR Item 4.12.1-Earth work in excavation by mechanicalmeans (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqmon plan) including getting out and disposal of excavated earthlead up to 50 m and lift up to 1.5 m, as directed by Engineerin-charge. 1. All kinds of soilHSR Rate(Rs.) 78.00 Through Rate |
| 12 | HSR Item 4.32-Filling available excavated earth (excludingrock) in trenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift up to 1.5 m.HSR Rate(Rs.) 46.00 Through Rate |
| 13 | HSR Item 11.75.2-Wall painting with premium acrylic emulsionpaint of interior grade, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre of approvedbrand and manufacture, including applying additional coatswherever required to achieve even shade and colour. 2. TwocoatsHSR Rate(Rs.) 44.00 Through Rate |
| 14 | HSR Item 6.1.6-Providing and laying in position cementconcrete of specified grade excluding the cost of centeringand shuttering - All work below plinth level and up to Floor IVlevel: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 gradedstone aggregate 40 mm nominal size)HSR Rate(Rs.) 2442.00 Through Rate |
| 15 | HSR Item 7.30-Extra for providing and placing in position 2Nos. 6mm dia. M.S. bars at every third course of half brickmasonry.HSR Rate(Rs.) 75.00 Through Rate |
| 16 | HSR Item 7.28.2-Half brick masonry with common burnt claynon-modular bricks of class designation 10.5 in superstructureabove plinth level up to floor IV level. 2. Cement mortar 1:4 (1cement :4 coarse sand)HSR Rate(Rs.) 488.00 Through Rate |
| 17 | HSR Item 6.30.1-Centering and shuttering including strutting,propping etc. and removal of form for 1. Foundations,footings, bases of columns, etc. for mass concreteHSR Rate(Rs.) 156.00 Through Rate |
| 18 | HSR Item 9.58.5.2-Providing and fixing on wall faceUnplasticised - PVC moulded fittings/ accessories forUnplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. 5.2.Bend 87.5°110 mm bendHSR Rate(Rs.) 93.00 Through Rate |
| 19 | HSR Item 6.30.3-Centering and shuttering including strutting,propping etc. and removal of form for 3. Suspended floors,roofs, landings, balconies and access platformHSR Rate(Rs.) 208.00 Through Rate |
| 20 | HSR Item 9.10.1-Painting top of roofs with bitumen ofapproved quality @ 17kg per 10 sqm impregnated with a coatof coarse sand at 60 cudm per 10 sqm, including cleaning theslab surface with brushes and finally with a piece of clothlightly soaked in kerosene oil complete : 1. With residual typepetroleum bitumen of grade VG -10HSR Rate(Rs.) 93.00 Through Rate |
| 21 | HSR Item 10.1-Providing and laying of base course of floorsconsisting of 100 mm thick cement 1:8:16 and 100 mmsand or stone filling.HSR Rate(Rs.) 260.00 Through Rate |
| 22 | HSR Item 6.30.5-Centering and shuttering including strutting,propping etc. and removal of form for 5. Lintels, beams, plinthbeams, girders, bressumers and cantileversHSR Rate(Rs.) 296.00 Through Rate |
| 23 | HSR Item 6.13.A-Making plinth protection 50mm thick ofcement concrete 1:3:6 (1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size) over 75mm thick bed ofdry brick ballast 40 mm nominal size, well rammed andconsolidated and grouted with fine sand, including necessaryexcavation, levelling and dressing and finishing the topsmooth. A. Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 manufactured sand derived fromRecycled Concrete Aggregate (RCA) : 6 graded stoneaggregate 20 mm nominal size Recycled Concrete Aggregate(RCA) over 75mm thick bed of dry brick ballast 40 mmnominal size, well rammed and consolidated and grouted withfine sand, including necessary excavation leveling & dressing& finishing the top smooth.HSR Rate(Rs.) 286.81 Rate |
| 24 | HSR Item 7.21.1-Brick work with common burnt clay nonmodular bricks of class designation 10.5 in foundation andplinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)HSR Rate(Rs.) 4128.00 Through Rate |
| 25 | HSR Item 7.22.2-Brick work with common burnt clay nonmodular bricks of class designation 10.5 in superstructureabove plinth level up to floor IV level in all shapes and sizes in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand)HSR Rate(Rs.) 4488.00 Through Rate |
| 26 | HSR Item 9.12.1-10cm thick (average) mud phaska ofdamped brick earth on roofs laid to slope consolidated andplastered with 25 mm thick mud mortar with bhusa @ 35 kgper cum of earth and gobri leaping with mix 1:1 (1 clay : 1cow-dung) and covered with machine moulded tile bricks,grouted with cement mortar 1:3 ( 1 cement : 3 fine sand)mixed with 2% of integral water proofing compound by weightof cement and finished neat. 1. With machine mouldedcommon burnt clay non-modular brick tiles of classdesignation 12.5, conforming to IS 2690HSR Rate(Rs.) 491.00 Through Rate |
| 27 | HSR Item 9.17.1-Providing gola 75x75 mm in cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate10 mm and down gauge), including finishing with cementmortar 1:3 (1 cement : 3 fine sand) as per standard design : 1.In 75x75 mm deep chaseHSR Rate(Rs.) 112.00 Through Rate |
| 28 | HSR Item 9.18-Making khurras 45x45 cm with averageminimum thickness of 5 cm cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of 20 mm nominalsize) over P.V.C. sheet 1 m x1 m x 400 micron, finished with12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and acoat of neat cement, rounding the edges and making andfinishing the outlet complete.HSR Rate(Rs.) 147.00 Through Rate |
| 29 | HSR Item 9.57.2-Providing and fixing on wall faceUnplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion, (i) Singlesocketed pipes. 2. 110 mm diameterHSR Rate(Rs.) 200.00 Through Rate |
| 30 | HSR Item 9.58.3.2-Providing and fixing on wall faceUnplasticised - PVC moulded fittings/ accessories forUnplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. 3.2.Single tee with door110x110x110 mmHSR Rate(Rs.) 155.00 Through Rate |
| 31 | HSR Item 9.58.1.3-Providing and fixing on wall faceUnplasticised - PVC moulded fittings/ accessories forUnplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. 1.3.Coupler 150 mmHSR Rate(Rs.) 118.00 Through Rate |
| 32 | HSR Item 9.58.6.2-Providing and fixing on wall faceUnplasticised - PVC moulded fittings/ accessories forUnplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. 6.2.Shoe (Plain)110 mm ShoeHSR Rate(Rs.) 79.00 Through Rate |
| 33 | HSR Item 9.59.2-Providing and fixing Unplasticised -PVC pipeclips of approved design to Unplasticised - PVC rain waterpipes by means of 50x50x50 mm hard wood plugs, screwedwith M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 (1 cement : 4 coarsesand) and making good the wall etc. complete. 2. 110 mmHSR Rate(Rs.) 147.00 Through Rate |
| 34 | HSR Item 10.67.2-Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer),with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours and shade, in skirting,riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joint with white cement andmatching pigments etc. complete. 2. Size of Tile 600x600 mmHSR Rate(Rs.) 1004.00 Through Rate |
| 35 | HSR Item 10.57-Providing and laying Ceramic glazed floortiles of size 300x300 mm (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey, FumeRed Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement andmatching pigment etc., complete.HSR Rate(Rs.) 535.00 Through Rate |
| 36 | HSR Item 11.98.1-Finishing walls with 100% Premium acrylicemulsion paint having VOC less than 50 gm/litre and UVresistance as per IS 15489:2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (CompanyDepot Tinted) with silicon additives. 1. New work (Two ormore coats applied @ 1.43 litre/ 10 sqm Over and includingpriming coat of exterior primer applied @ 0.90 litre/10 sqmHSR Rate(Rs.) 86.00 Through Rate |
| 37 | HSR Item 12.36.1-Providing and fixing ISI marked flush doorshutters conforming to IS : 2202 (Part I) decorative type, coreof block board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters. 1. 35mm thick including ISI marked Stainless Steel butt hinges withnecessary screwsHSR Rate(Rs.) 2385.00 Through Rate |
| 38 | HSR Item 13.3.1.1-Providing and fixing pressed steel doorframes conforming to IS: 4351, manufactured fromcommercial mild steel sheet of 2.0 mm thickness, includinghinges, jamb, lock jamb, bead and if required angle thresholdof mild steel angle of section 50x25 mm, or base ties of 2.00mm, pressed mild steel welded or rigidly fixed together bymechanical means, including M.S. pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shockabsorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed byEngineer-in-charge: 1.1. Profile B Fixing with adjustable lugswith split end tail to each jambHSR Rate(Rs.) 341.00 Through Rate |
| 39 | HSR Item 12.105-Providing and fixing bright finished brass100 mm mortice latch and lock, ISI marked, with six leversand a pair of anodised (anodic coating not less than grade AC10 as per IS : 1868) aluminium lever handles of approvedquality with necessary screws etc. complete.HSR Rate(Rs.) 571.00 Through Rate |
| 40 | HSR Item 12.103.2-Providing and fixing aluminium hangingfloor door stopper, ISI marked, anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyedto required colour and shade, with necessary screws etc.complete. 2. Twin rubber stopperHSR Rate(Rs.) 52.00 Through Rate |
| 41 | HSR Item 12.130.3-Providing and fixing of casement and fixedwindows made from multi chambered UPVC profiles of 56 to68mm width in natural from stabilized for heat, light, impactand UV radiation The UPVC profiles should be reinforced withgalvanized steel profiles of designed thickness. All openablesashes shall be having weather seal fitted in continuouslengths made from Bubble EPOM Rubber and side hung/ tophung with up to 90 degree opening friction stays of SS 304with provision of multipoint locking system made from Espagrods. All handle shall be made from Die Cast Zinc alloy(Model ESPAG)BS-1004A in white finish with suitable lockingarrangement. The windows shall be fixed to opening usingexpandable screws and friction stays that shall be able to withstand wind speeds up to 180 km/hr. the shoot bolts inwindows shall be rust proof metallic coated steel. The windowframes shall be fixed in masonry wall RCC with necessaryfasteners, nuts, bolts, washers, caps, silicon sealant etc.complete 3. Double glass glazing comprising of 6 mm thicktoughened clear glass + 12mm air gap + 5mm annealed clearglass.HSR Rate(Rs.) 1987.00 Through Rate |
| 42 | HSR Item 13.29.2-Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer usingstructural steel etc. as required. 2. In gratings, frames, guardbar, ladder, railings, brackets, gates and similar worksHSR Rate(Rs.) 83.00 Through Rate |
| 43 | HSR Item 6.34.6-Steel reinforcement for R.C.C. work, wherenot included in the complete rate of RCC, includingstraightening, cutting, bending, placing in position, binding,wastage, overlaps, welded joints, spacer bars, chairs, stays,hangers and annealed steel wire etc. complete in all respectabove plinth level Note:- Reinforcement shall be measured inlength including hooks, if any, separately for differentdiameters as actually used in work , excluding overlaps.Wastage, overlaps, couplings, welded joints, spacer bars,chairs, stays, hangers and annealed steel wire or othermethods of binding & placing shall not be measured and costof these items shall be deemed to be included in the rates forreinforcement. 6. Thermo-Mechanically Treated bars of gradeFe-500D or more.HSR Rate(Rs.) 68.00 Through Rate |
| 44 | HSR Item 23.4.4.2-COPPER WIRING WITH MODULARSWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.2.Wiring in PVC conduit system for 3-pin 5amp. Plug point byusing 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 SqmmFRLS copper wire , including providing 1 no 5/6 Amp 3/5 pinModular type socket and 1 no 5/6 Amp Modular type switchrequired GI Box ,modular face plate etc complete as requiredGroup BHSR Rate(Rs.) 830.00 Through Rate |
| 45 | HSR Item 24.1.8-EARTHING AND LIGHTENING ARRESTOR8. Providing and fixing 25 mm x 3mm G.I. strip on surface orin recess for connections etc. as required with all labour andmaterial.HSR Rate(Rs.) 96.00 Through Rate |
| 46 | HSR Item 23.8.10.5-FITTING AND ACCESSORIES 10.5.Providing and fixing GI concealed sheet metal boxes withinner and outer face plate including concealing the box in walland fixing in position with inner plate and face plate with alllabour and material required for the job complete in allrespects. 8 ModulesHSR Rate(Rs.) 233.00 Through Rate |
| 47 | HSR Item 23.3.6.9-COPPER WIRING IN PVC CONDUIT(SURFACE/RECESS) 6.9. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core forearth wire PVC insulated Copper conductor cable 1100 Voltsgrade in PVC Conduit etc as required. 3 run of Size 1.50Sqmm(1/1.40mm)HSR Rate(Rs.) 189.00 Through Rate |
| 48 | HSR Item 23.3.6.4-COPPER WIRING IN PVC CONDUIT(SURFACE/RECESS) 6.4. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core forearth wire PVC insulated Copper conductor cable 1100 Voltsgrade in PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm)HSR Rate(Rs.) 172.00 Through Rate |
| 49 | HSR Item 23.7.6.4-PVC CONDUIT PIPE ONLY (SURFACEOR RECESSED) FOR ELECTRICAL POINTS 6.4. Supply anderection of PVC CONDUIT ISI marked (Medium) recessed inwall/ceiling etc. including the cost of PVC bends, inspectionboxes, iron hooks and cement concrete etc. complete in allrespect up to the entire satisfaction of Engineer-in-Charge ofwork. PVC pipe of 40 mm dia.HSR Rate(Rs.) 57.00 Through Rate |
| 50 | HSR Item 23.8.10.4-FITTING AND ACCESSORIES 10.4.Providing and fixing GI concealed sheet metal boxes withinner and outer face plate including concealing the box in walland fixing in position with inner plate and face plate with alllabour and material required for the job complete in allrespects. 6 ModulesHSR Rate(Rs.) 186.00 Through Rate |
| 51 | HSR Item 23.8.4-FITTING AND ACCESSORIES 4. Supplyand erection of 10.5 cm dia M.S.Fan box including 8 mm dia30 cm long M.S. Road made into suitable suspension hookand erected in R.C.C. slab for the erection of fan completewith all labour and material required to complete the job.HSR Rate(Rs.) 95.00 Through Rate |
| 52 | HSR Item 23.8.10.6-FITTING AND ACCESSORIES 10.6.Providing and fixing GI concealed sheet metal boxes withinner and outer face plate including concealing the box in walland fixing in position with inner plate and face plate with alllabour and material required for the job complete in allrespects. 12 ModulesHSR Rate(Rs.) 282.00 Through Rate |
| 53 | HSR Item 23.3.6.8-COPPER WIRING IN PVC CONDUIT(SURFACE/RECESS) 6.8. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core forearth wire PVC insulated Copper conductor cable 1100 Voltsgrade in PVC Conduit etc as required. 2 run of Size 4 Sqmm(1/2.24mm)HSR Rate(Rs.) 259.00 Through Rate |
| 54 | HSR Item 23.8.11.1-FITTING AND ACCESSORIES 11.1.Providing and fixing modular type accessories of approvedmake in existing box including fixing and making necessaryconnections, complete in all respect. 5 amp 1 way switchHSR Rate(Rs.) 41.00 Through Rate |
| 55 | HSR Item 23.8.11.3-FITTING AND ACCESSORIES 11.3.Providing and fixing modular type accessories of approvedmake in existing box including fixing and making necessaryconnections, complete in all respect. 15 amp 1 way switchHSR Rate(Rs.) 82.00 Through Rate |
| 56 | HSR Item 23.8.11.7-FITTING AND ACCESSORIES 11.7.Providing and fixing modular type accessories of approvedmake in existing box including fixing and making necessaryconnections, complete in all respect. step type Fan Regulator2 modules 300 wattHSR Rate(Rs.) 257.00 Through Rate |
| 57 | HSR Item 23.22.4.3-MCCB ,DISTRIBUTION BOARDS,MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply anderection of double door sheet steel enclosure distributionboard suitable for MCBS and ELCBS etc. recessed in wallincluding bonding to earth with all labour and materialrequired to complete the job in all respect up to the entiresatisfaction of the Engineer-in-Charge of the work. SPN DBDouble Door 12 way ( 2 incoming and 10 outgoing)HSR Rate(Rs.) 1706.00 Through Rate |
| 58 | HSR Item 24.1.1-EARTHING AND LIGHTENING ARRESTOR1. Earthing with GL earth pipe 4.5 m long and 40 mm dia withmasonry enclosures on the top etc. (but without charcoal orcoke and salt) as required.HSR Rate(Rs.) 2721.00 Through Rate |
| 59 | HSR Item 23.8.11.9-FITTING AND ACCESSORIES 11.9.Providing and fixing modular type accessories of approvedmake in existing box including fixing and making necessaryconnections, complete in all respect. T.V. Socket outletmodular typeHSR Rate(Rs.) 75.00 Through Rate |
| 60 | HSR Item 23.22.6.2-MCCB ,DISTRIBUTION BOARDS,MCB`s, RCCB`s, CHANGE OVER etc. 6.2. Supply anderection double pole/Four pole Residual (RCCB/ELCB) on240/415V, 5Hz. AC supply installed in existing sheet steelenclosures including making necessary connections andbonding to earth with all labour and material required tocomplete the job in all respect up to the entire satisfaction ofthe Engineer-in-Charge of the work. DP RCCB 30masensitivity , 40 AHSR Rate(Rs.) 1670.00 Through Rate |
| 61 | HSR Item 23.8.12-FITTING AND ACCESSORIES 12. Supplyand Fixing 3 mm thick Bakelite sheet cover on existingMS/PVC junction box/tee etc including fixing with brassscrews and washers.HSR Rate(Rs.) 8.00 Through Rate |
| 62 | HSR Item 23.21-Fixing of LED Down lighter 7 to 28 Watt onceiling or in false ceiling , including cutting/making hole inceiling including making connections etc as requiredHSR Rate(Rs.) 48.00 Through Rate |
| 63 | HSR Item 23.22.5.1-MCCB ,DISTRIBUTION BOARDS,MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply anderection of miniature circuit Breaker 240/415 V in the existingdistribution board including making necessary connections:- 6amp. to 32 amp Single PoleHSR Rate(Rs.) 145.00 Through Rate |
| 64 | HSR Item 20.71.1-Supply, erection, testing of Ceiling fans ISmarked (as per IS code 374) with suitable GI pipe complete inall respects complete as per directions of Engineer-in-charge1. 48\\" (1200mm)HSR Rate(Rs.) 2054.00 Through Rate |
| 65 | HSR Item 20.72-Supplying, errection, testing of Exhaust fan(as per IS code 374) having a capacity of 45 cubic metre perminute complete with suitable G.I sheet ducting in structureconfirming to latest IS specifications complete in all respect tosatisfaction of Engineer-in-charge.HSR Rate(Rs.) 1339.00 Through Rate |
| 66 | HSR Item 23.23.4-MISCELLANEOUS 4. Providing and fixingfan hook made from 8 mm dia MS rod 75 cm long of requiredshape and sizeHSR Rate(Rs.) 72.00 Through Rate |
| 67 | HSR Item 24.1.2-EARTHING AND LIGHTENING ARRESTOR2. Extra for using salt and char coal/coke for pipe earthelectrode as required.HSR Rate(Rs.) 652.00 Through Rate |
| 68 | HSR Item 24.1.7-EARTHING AND LIGHTENING ARRESTOR7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mmdia,GI pipe as/from earth electrode including soldering etc. asrequired.HSR Rate(Rs.) 360.00 Through Rate |
| 69 | HSR Item 24.11.24-LT CABLES (Aluminium Conductor,Armoured and Unarmoured) PROVIDING ANDERECTION/LAYING OF PVC/ XLPE INSULATEDUNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75METER BELOW GROUND LEVEL COVERED WITH SANDAND BRICKS INCLUDING EXCAVATION AND REFILLINGOF TRENCHES 24. 16 Sq mm 4 core (Arm.)HSR Rate(Rs.) 326.00 Through Rate |
| 70 | HSR Item 24.2.7.2-LT CABLE 7.2. Supply and erection ofsuitable compression type brass cable glands for undergroundCable :- 10 sqmm to 16 sqmm Cable 2 to 4 CoreHSR Rate(Rs.) 45.00 Through Rate |
| 71 | HSR Item 24.2.6.6-LT CABLE 6.6. Supply and erection ofcopper lugs including crimping etc. entire satisfaction ofEngineer-in- Charge of the work. 16 sqmmHSR Rate(Rs.) 13.00 Through Rate |
| 72 | HSR Item 24.2.8.4-LT CABLE 8.4. Supply and erection ofaluminium lugs heavy duty including crimping etc. up to theentire satisfaction of the Engineer-in-charge of the work. 16sqmmHSR Rate(Rs.) 8.00 Through Rate |
| 73 | HSR Item 23.3.1.2-COPPER WIRING IN PVC CONDUIT(SURFACE/RECESS) 1.2. Wiring for Light/Fan/call bell pointin 1.5 sqmm FRLS PVC insulated copper conductor cable in1.6 mm thick PVC conduit pipe. Group BHSR Rate(Rs.) 512.00 Through Rate |
| 74 | HSR Item 23.4.5.2-COPPER WIRING WITH MODULARSWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.2.Wiring in PVC conduit system for 3-pin 15amp. Plug point byusing 2 no 4 sqmm FRLS copper wire and 1 no 4 SqmmFRLS copper wire for earthling , including providing 1 no15/16 Amp 3/6 pin Modular socket and 1 no 15/16 AmpModular switch required GI Box , modular face plate etccomplete as required Group BHSR Rate(Rs.) 1145.00 Through Rate |
| 75 | HSR Item 23.3.6.3-COPPER WIRING IN PVC CONDUIT(SURFACE/RECESS) 6.3. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core forearth wire PVC insulated Copper conductor cable 1100 Voltsgrade in PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm)HSR Rate(Rs.) 144.00 Through Rate |
| 76 | HSR Item 4.16.1.3-Excavating trenches of required width anddepth for pipes, cables, etc including excavation for sockets,and dressing of sides, ramming of bottoms, including gettingout the excavated soil, and then returning the soil as required,in layers not exceeding 20 cm in depth, includingconsolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within alead of 50 m. 1.3. All kind of soil Pipes, cables etc, exceeding300 mm dia but not exceeding 600 mm dia.HSR Rate(Rs.) 131.00 Through Rate |
| 77 | HSR Item 21.87.1.1-Constructing brick masonry road gullychambers as per standard drawings (as per sizes givenbelow) including dressing of beds and sides of chambers toexact profiles, 15cm thick lime concrete 16:24:100 (as perspecified in item No.10.6) in foundations 1st class brick worklaid in cement sand mortar 1:5, 40 mm thick cement concrete1:2:4 topping inside the chamber with a floating coat of 1.5mmthick neat cement laid in one operation to the topping, theentire inner surface of the chamber rendered with neatcement not less than 12mm in thickness of 1:2 cement sandplaster and finished with floating coat of neat cement 1 mmthick left absolutely smooth polished and correct to templatesincluding labour for fixing the C.I. road gully grating and frameincluding painting with coal tar (as Specified in item No. Item21.48) complete to the requirement of the Engineer in-charge1.1. Single road gully chamber - Size: 610mm x 457mm x800mmHSR Rate(Rs.) 3237.00 Through Rate |
| 78 | HSR Item 21.90.2.1-Construction of rectangular standardbrick masonry manhole chambers to standard drawings onS.W. pipe sewers or other circular pipe sewers up to therequired depth in 1.5 cement sand mortar, lime concrete inbed and sides of pipe sewer and cement concrete 1:2:4 inbenching, 12 mm thick water tight 1:2 cement sand plasterwith a floating coat of neat cement and finished with 2 coats ofsodium silicate on interior surface where required, reinforcedcement concrete slab 180mm thick fixing 560 mm internaldiameter C.I. manhole cover and frame weight not less than2.5 quintal painted with 3 coats of black bitumen paint, fixinggalvanised malleable iron steps embedded in 1:2 cementsand mortar complete. the rate covers the cost of M.S. steelfor R.C.C. slab labour for fixing and carriage of C.I. manholeframe and cover and malleable iron steps from the stores ofthe Engineer-in-charge of the works to the site of works. Therate also include the cost of accurately planned and fittedcentring, supports for all works as well as for all curves andspecial work, cleaning out their beds etc. sodium silicate shallbe supplied free of cost at the stores of the Engineer-incharge. 2.1. On 150 mm internal diameter pipe sewer -for1.20 meters depth below ground levelHSR Rate(Rs.) 10308.00 Through Rate |
| 79 | HSR Item 21.84.1-Constructing brick masonry inspectionChamber sizes as given below up to 0.60 metre averagedepth in cement mortar 1:5 lime concrete with 40 per centlime mortar 2:3 in foundation cement concrete 1:2:4 benching12mm thick cement plaster 1:2 with a floating coat of 1 mmthick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cementconcrete topping, 50mm thick with 455mmx455mm / 455mmx610mm inside light duty C.I. inspection chamber cover andframe weight as per I.S.I. specification painted with 3 coats ofblack bitumastic superior paint complete as per standarddesign. 1. Size 450 mm X450 mm inside (with 455 mm x 455mm cover and frame light duty single seal weighing 20 kg withC.C. toppingHSR Rate(Rs.) 3487.00 Through Rate |
| 80 | HSR Item 22.87.2-Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threadedfittings This includes jointing of pipes and fittings with one stepCPVC solvent cement, trenching, refilling and testing of jointscomplete as per direction of Engineer in Charge.External work 2. 20 mm nominal outer dia PipesHSR Rate(Rs.) 146.00 Through Rate |
| 81 | HSR Item 22.212.2.3-Providing and fixing in position bestIndian make coat and hat hooks fixed into wall with C.P. brassscrews and rawl plugs etc. complete including cutting andmaking good the walls etc. 2.3. Aluminium coat and hat hooksThree WayHSR Rate(Rs.) 163.00 Through Rate |
| 82 | HSR Item 22.38-Providing and fixing 8 mm dia C.P. / S.S. Jetwith flexible tube up to 1 metre long with S.S. triangular plateto European type W.C. of quality and make as approved byEngineer - in - charge.HSR Rate(Rs.) 241.00 Through Rate |
| 83 | HSR Item 22.222.1.2-Providing and fixing in position singelsocket SWR UPVC soil waste or antisyphonage pipes as perIS 13592 of E.D.C manufacture or of any other reputed firmincluding cutting, jointing, wastage, but excluding cost ofjointing. 1.2. Single Socket Type A110mm o/d SWR UPVC pipe lines laid completeHSR Rate(Rs.) 248.00 Through Rate |
| 84 | HSR Item 22.25.1-Providing and fixing white vitreouschinaware flat back or wall corner type lipped front urinalbasin of 430x260x350 mm and 340x410x265 mm sizesrespectively with flushing cistern with standard flush pipe andC.P. brass spreaders with brass unions and G.I clampscomplete, including painting of fittings and brackets, cuttingand making good the walls and floors wherever required : 1.One urinal basin with 5 litre white P.V.C. automatic flushingcisternHSR Rate(Rs.) 2844.00 Through Rate |
| 85 | HSR Item 6.1.6-Providing and laying in position cementconcrete of specified grade excluding the cost of centeringand shuttering - All work below plinth level and up to Floor IVlevel: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 gradedstone aggregate 40 mm nominal size)HSR Rate(Rs.) 2442.00 Through Rate |
| 86 | HSR Item 22.20.2-Providing and fixing in position C.I. plainNahani Trap conforming to I.S.I. specifications and of selfcleaning design with C.P. brass hinged grating with framecomplete 2. With 75 mm internal diameter outletHSR Rate(Rs.) 1170.00 Through Rate |
| 87 | HSR Item 22.1.1-Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brasswaste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require:1. White vitreous chinaware Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar tapsHSR Rate(Rs.) 2027.00 Through Rate |
| 88 | HSR Item 22.16-Providing and fixing 40mm i/d G.I. waste pipeembedded in walls up to floor level including cost of union andplumber jointHSR Rate(Rs.) 851.00 Through Rate |
| 89 | HSR Item 22.24.1-Providing and fixing white vitreouschinaware pedestal type water closet (European type) withseat and lid, 10 litre low level white vitreous chinawareflushing cistern and C.P. flush bend with fittings and C.I.brackets, 40 mm flush bend, overflow arrangement withspecials of standard make and mosquito proof coupling ofapproved municipal design complete, including painting offittings and brackets, cutting and making good the walls andfloors wherever required : 1. W.C. pan with ISI marked whitesolid plastic seat and lidHSR Rate(Rs.) 4386.00 Through Rate |
| 90 | HSR Item 22.15-Providing and fixing CP Brass 32mm sizeBottle Trap of approved quality and make and as per thedirection of Engineer-in-charge.HSR Rate(Rs.) 735.00 Through Rate |
| 91 | HSR Item 22.181-Providing and placing on terrace (at all floorlevels) polyethylene water storage tank, IS : 12701 marked,with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but withoutfittings and the base support for tank.HSR Rate(Rs.) 7.00 Through Rate |
| 92 | HSR Item 22.107.1-Providing and fixing C.P. brass stop cock(concealed) of standard design and of approved makeconforming to IS:8931. 1. 15 mm nominal boreHSR Rate(Rs.) 508.00 Through Rate |
| 93 | HSR Item 22.98.3-Providing and fixing gun metal gate valvewith C.I. wheel of approved quality (screwed end) : 3. 32 mmnominal bore.HSR Rate(Rs.) 485.00 Through Rate |
| 94 | HSR Item 22.51.1.2-Providing and fixing soil, waste and ventpipes : 1.2. 100 mm diaCentrifugally cast (spun) iron socket & spigot (S&S) pipe asper IS: 3989HSR Rate(Rs.) 900.00 Through Rate |
| 95 | HSR Item 22.210.1-Providing and fixing mirror of superiorglass (of approved quality) and of required shape and sizewith plastic moulded frame of approved make and shade with6 mm thick hard board backing : 1. Circular shape 450 mm diaHSR Rate(Rs.) 804.00 Through Rate |
| 96 | HSR Item 22.87.4-Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threadedfittings This includes jointing of pipes and fittings with one stepCPVC solvent cement, trenching, refilling and testing of jointscomplete as per direction of Engineer in Charge.External work 4. 32 mm nominal outer dia PipesHSR Rate(Rs.) 272.00 Through Rate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender