Tender For Repairing Of Existing School Building In Change Of Roofing, G.I.Sheet And Painting Work To Government Primary School Moti Vankad In Bhimpore Group Gam Panchayat ,Nani Daman.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jul 2026
13 days left
EMD
83102
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Daman → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Existing School Building In Change Of Roofing, G.I.Sheet And Painting Work To Government Primary School Moti Vankad In Bhimpore Group Gam Panchayat ,Nani Daman.
BOQ
| Sl. No. | Item Description |
| 1 | Items : |
| 2 | Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. |
| 3 | Distempeing (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth. |
| 4 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete |
| 5 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust and otherforeign matter sand papering and stopping. |
| 6 | Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. |
| 7 | Supply and apply of Asian paints Smartcare Damp Proof -single component fibre reinforced acrylyc coating.The coating must be applied in three coats with first coat at 33% dillution and the remaining two coats without dillution.for priming coat ,no additional primer is allowed.The coating should be white in colour and shall carry TUV test certificate, singapore with SRI value of 105.6. the coating shall also have anticarbonation property with waterproofing protectionup to 7 bars hydrostatic pressure as Directed by Engineer incharge. |
| 8 | Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. |
| 9 | Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. |
| 10 | Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I.J. or L Hooks and nuts 8mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick sheet. |
| 11 | Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm |
| 12 | Providing and fixing 150mm wide 450mm over all semicircular plain G.I.sheet class-3 gutter with Iron brackets 40mm x 3mm size Bolts, Nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet. |
| 13 | Providing and fixing flase celling 600 x 600mm cement sheet with Aluminium framing as directed by engineer-in-charge. |
| 14 | Excavation for foundation upto 1.5 m depth includingsorting out and stacking of useful materials anddisposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum |
| 15 | Providing and filling rubbles including hand packing and filling voids with Quarry Spalls as directed including ramming and consolidating etc. complete. |
| 16 | Providing and laying cement concrete 1:3:6 (1-Cement : 3coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth |
| 17 | Brick work using common burnt clay building bricks havingcrushing strength not less than 35 kg./Sq.Cm. in foundation andplinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A)Modular Extra for brick work in superstructure above plinth level upto floor two level (A) Modular |
| 18 | Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. |
| 19 | Providing and laying controlled cement concrete M.150 and exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for R.C.Cwork in (iv) Slabs having more than 13 cm and upto 15 cm.thickness |
| 20 | Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. |
| 21 | Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed.(C)with oval conduit / pvc casing capping double lock type. (Cat. III) |
| 22 | Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FR PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary ceiling rose / H.D. Connector as directed.(c)with oval conduit / pvc casing capping double lock type. (Cat-III) |
| 23 | Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge(1)One No. SP 6 Amp.(Cat- III) |
| 24 | (2) One No 5 pin plug (Cat- III) |
| 25 | (7) Blank Plate Single.(Cat - III) |
| 26 | (9) 16 Amp.SP one Way Switch.(Cat- III) |
| 27 | (10) 6/16Amp. Universal socket |
| 28 | Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall/celling of following size. (2) 25 mm. |
| 29 | Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size (c) with oval conduit/pvc casing capping double lock type. (b) 2 wire 2.5 sq. mm |
| 30 | Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25K.A. at 415V. having normal current rating up to 25A. to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50c/s. with all internal connections & complete erected inexisting 16 G.M.S. housing. ICS = 100% of ICU only Cat. III. 1) for housing the MCCB |
| 31 | Providing and erecting busbar chamberconfirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with COPPER busbar having current density not more than 1.6Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulation tape for phase sequence, three phase & neutral each suitable for following current capacity with necessary painting mounted on wall or pedestal frame of required size with necessary connections.(A) Suitable for 63/100 Amp. capacity |
| 32 | Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark. (Cat-III). |
| 33 | Providing and erecting four pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (b) for 63 Amp. (Cat-III). |
| 34 | Plastic enclosure fitted with DIN rail suitable for incorporating One/Two nos MCB. |
| 35 | Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). (J) Three phase 4 way SS Double door for single phase outgoing horizontal box |
| 36 | Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G. |
| 37 | Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (a) For electrical installation up to 440 V in normal soil Length of pip: 1 Mtr. Back filling compound – 1 Nos. Bag of 15 Kg. |
| 38 | Supplying and erecting nuwood 12mm thick on existing angle iron frame or wooden patti |
| 39 | Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (B) (A-1)31/2 core 35Sq.mm (16Sq.mm 1/2 core) |
| 40 | Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (d) 4 core 16 Sq. mm. |
| 41 | Marking trench in soft soil of suitable width of 90 cms. Deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground. |
| 42 | Making trench in hard murrum/Tar road of suitable width of 90cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.(a) Add if additional machineries like hammer driller or JCB |
| 43 | Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(e)2 to 4 core 16 Sq. mm. |
| 44 | Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 31/2 core 35-50 Sq. Mm. |
| 45 | Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(C) 16 Sq. mm. |
| 46 | (D) 35/50 Sq.mm |
| 47 | Providing and erecting Approved make Power saving 50 watt Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete having 3 blades with aluminium blades with, canopy and 30 cms. down rod erected with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge] |
| 48 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with with company mark/name 120 to 300 V, Power Factor more than 0.9, THD < 10 %,CCT 4000 K to 6500K, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt,LED driver efficiency > 85 %CREE /OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates).(A) Tube Light with integral/ non-integral driver.(c) 16-18 Watts, Surge - 4KV, IP-20, 4 feet. (Cat-III) Make:Wipro, Havells, Philips, Bajaj, Surya, HPL. (as directed by Engineer-in-charge). |
| 49 | Providing and fixing FRP frame size 125x65 mm and 35mm thickFRP shutter having extra reinforcement on sides & edges in polish finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof,termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve. |
| 50 | Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (C) Hard board panels. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender