Tender For Comprehensive Maintenance B/R & E/M Services In Otm Accn Of Inf Bn At Mil Stn Dhana Under Age(I) Dhana
Tender Value
30 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance B/R & E/M Services In Otm Accn Of Inf Bn At Mil Stn Dhana Under Age(I) Dhana
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brick or Stone Masonry built in cement mortar with M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) incl tiling if any and M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed. |
| 3 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified & directed. |
| 4 | M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. |
| 5 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 6 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:4) complete all as specified and directed. |
| 7 | M&L glazed ceramic colour tiles, in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:3) as in backing coat complete all as specified and directed. |
| 8 | M&L for Vitrified ceramic coloured light shade9-10 mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors over and including 20mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed |
| 9 | M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed. |
| 10 | M&L Sand filling under floor/pavement or in foundation including watering and consolidation complete all as specified and directed. |
| 11 | M&L machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment (reflective type) complete all as specified and as directed. |
| 12 | M&L Granite of 18-20mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and icluding 20 mm screed bed in CM 1:3 complete all as specified and directed. |
| 13 | M & L for mechine cut kota stone slab flooring 20-25 mm thickover cement screed 20mm thick base laid and jointed with white cement slurry with pigment including cutting and polishing complete all as specified and directed. |
| 14 | M & L for mechine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed/backing coat and jointed with white cement slurry with pigment including cutting and polishing complete all as specified and directed. |
| 15 | M&L for Taking down of cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. complete all as specified and directed. |
| 16 | M&L for 20 mm thick rendering in CM 1: 4 on faces of brick or concrete surface, shall be done in two coats comprising 5mm thick in CM 1:4 mixed with water proofing compound @3% by weight of cement and over a backing coat of 15mm thick in CM 1:4 and finished with trowel to an even and smooth surfaces without using any extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid in respective item |
| 17 | Supply only Integral water proofing compound complete all as specified and directed. |
| 18 | M&L for 15 mm thick rendering brick or concrete surface in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. |
| 19 | M&L for 10mm thick rendering on fair faces of brick or concrete surface in cm 1:3 finishing the surfaces fair & even without using extra cement as in ceiling complete all as specified and directed. |
| 20 | M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed. |
| 21 | M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 22 | M&L for prepration of new ceiling surfaces, applying 3 coat of white wash on ceiling complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed. |
| 25 | Supply and fixing powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door/shutter, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 26 | Supply and fixing powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 27 | Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege. Note Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2. |
| 28 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 29 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solovent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in M.S. frame welded sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 30 | M & L 18/19mm thick Prelaminated plywood board, exterior grade, prelaminated one side with 1 mm thick decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards , kitchen cabinat etc fixed in repairs complete all as specified and directed. |
| 31 | S & F Continuous (piano) hinges,width of flap when open is 30 mm mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 32 | S & F 75 mm longExtruded brass handles, fabricated type polished complete all as specified and directed. |
| 33 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed for cup Board shutter etc complete all as specified and directed. |
| 34 | S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 36 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane complete all as specified and as directed. |
| 37 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed. |
| 38 | S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified. |
| 39 | S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium extruded section body complete all as specified and as directed. |
| 40 | S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 41 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 42 | S&F for ISI Marked 200 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 43 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 45 | S&F 4-levers Aluminium Mortice lock, vertical type, size 100 mm complete all as specified and directed |
| 46 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 47 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 48 | Dismantling of wall and ceiling hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed. |
| 49 | S&F Anodised aluminium snap grid of size 605mm X 605mm frame work for flase ceiling complete all as specified and as directed. |
| 50 | M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm X 600 mm grid (Frame work for ceiling shall be measured and paid seperately) complete all as specified and as directed. |
| 51 | Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 52 | Dismantling timber scantlings 40 sq. cm and over in section, for unframed work in any position complete all as specified and as directed. |
| 53 | S&F steel work as in rafter, purlins, posts tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 Complete all as specified and as directed. |
| 54 | S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed. |
| 55 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 56 | Supplying and laying of GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed. |
| 57 | Taking up or down 20mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 58 | Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed. |
| 59 | Taking up or down 25mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 60 | Supplying and laying of GI tubing Dia 25mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed. |
| 61 | S&F 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 62 | S & F in repair of ISI marked 15mm bore stop valves/angle valve concealed fancy type cast copper alloy, chromium plated with long shank and cup , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 63 | S&F 15 mm Pillar taps, cast copper alloy, chromium plated fancy type, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed. |
| 64 | Supply and fixing in repair for ISI marked 15mm bore, fancy type bib tap of chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 65 | S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 66 | S & F for in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 67 | S&F brass chromium plated tubular towel ring complete all as specified and as directed. |
| 68 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 69 | S&F in repair for vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm,waste coupling, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. |
| 70 | S&F in repair vitrous china white oval type under counter WHB of size not less than 195x600x425mm of first quality fixed complete all as specified and directed. |
| 71 | S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed. |
| 72 | S&F in repair vitreous china wash down water closed pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed. |
| 73 | Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed. |
| 74 | S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader complete all as specified and directed. |
| 75 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall with PVC clamps complete all as specified and directed. |
| 76 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified and directed. |
| 77 | S&F in repair waste coupling 40mm suitable size for kitchen sink of PTMT (half or full threaded) complete all as specified and directed |
| 78 | S&Fin repair 40mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed. |
| 79 | S&F in repair 32mm bore PVC waste pipe for wash basin one mtr long complete all as specified and directed. |
| 80 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified and directed. |
| 81 | S&F in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 82 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed |
| 84 | Hoisting & Fixing 500 Ltr rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. |
| 85 | Hoisting & Fixing 1000 Ltr rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. |
| 86 | M& L for complete removal of existing treatment by scrapping, wire brushing from old wallsand applying two coats of oil bound distemper over chalk whitening primer including preparation of surfaces with wall care putty complete all as specified and directed. |
| 87 | M & L for complete removal of existing treatment and appllying two coats of weather proof exterior paint over a coat of primer and waterproof exterior wall putty on wall for smooth finish including preparation of surfaces complete all as specified and directed.Note : Each stages will be got appoved from Engineer-in-Charge before application |
| 88 | M&L for complete removal of existing treatment on wall surfaces and applying two coats texture finish of approved design/colour over one coat of primer on prepared surfaces complete all as specified and directed.Note : Each stage i.e., preparation of surfaces, application of primer, application of first coat of texture, application of 2nd coat of texture will be got passed. |
| 89 | M&L preparation of old surface of ceiling and applying Two coat white wash complete all as specified and as directed |
| 90 | M&L for Preparation of old painted surfaces of Steel/ steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 91 | M&L for preparations of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and directed. |
| 92 | Taking down carefully existing aluminium/copper point wiring of any type/size (Light, fan, bell, socket, power socket etc complete with board outlet boxes fitting and fixtures such as switches, sockets, lamps holders, brackets, ceiling rose etc and removing from site and making good the disturbed surface of wall /floor etc to match existing complete all as specified and directed. |
| 93 | Taking down existing sub main wiring of any type/size complete from wall and making good distrubed surface complete all as specified and directed. |
| 94 | Taking down existing main switch /DBsw/ac box any type/size complete all as specified and directed. |
| 95 | M&L for point wiring with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC concealed Conduit pipe of suitable size as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc all as per site requirements including stainless steel terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green.(a) For one light point/fan Point controlled by one way switch. |
| 96 | All as per item No 95 above but for one 5 Amp independent socket controlled by one switch complete all as specified and directed. |
| 97 | All as per item No 95 above but for one 5 Amp socket controlled by one way switch on same board complete all as specified and directed. |
| 98 | All as per item No 95 above but for one light point controlled by two way switch on indepedant board complete all as specified and directed. |
| 99 | All as per item No 95 here-in-before but for power point wiring with 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable for earth continuity complete all as specified and directed. |
| 100 | All as per item No 95 here-in-before but one call bell point controlled by one bell push button switch complete all as specified and directed. |
| 101 | M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box duly painted with black bituminous paint over a coat of red oxide primer with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for One light point/fan point controlled by one switch. |
| 102 | All as per item No 101 above but one socket outlet 5 Amp controlled by one switch on the same board complete all as specified and directed. |
| 103 | All as per item No 101 above but one socket outlet 5 Amp controlled by one switch on the independent board complete all as specified and directed. |
| 104 | All as per item No 101 above but one call bell point on the same board or independent board complete all as specified and directed. |
| 105 | M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box duly painted with black bituminous paint over a coat of red oxide primer with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed |
| 106 | Material and labour for sub main wiring with 2 x 6 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC conduit pipe of suitable size ISI marked including continuous running earth wire by 6 Sqmm PVC unsheathed single core stranded copper conductor connected to common earth dolly including concealed sunken terminal boxes completed all as specified and directed. |
| 107 | S&F, in repairs, sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 6 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length complete all as specified and directed. |
| 108 | Supply and fixing modular plate with frame of 12 module complete all as specified and directed. |
| 109 | Supply and fixing modular plate with frame of 8 module complete all as specified and directed. |
| 110 | Supply and fixing modular plate with frame of 6 module complete all as specified and directed. |
| 111 | Supply and fixing modular plate with frame of 4 module complete all as specified and directed. |
| 112 | Supply and fixing modular plate with frame of 3 module complete all as specified and directed. |
| 113 | Supply and fixing modular plate with frame of 2 module complete all as specified and directed. |
| 114 | Supply and fixing modular switch 1 way 10 Amps 1 module complete all as specified and directed. |
| 115 | Supply and fixing modular fan regulator 2 module stepped type complete all as specified and directed. |
| 116 | Supply and fixing modular switch 1 way 16 Amps 1 module complete all as specified and directed. |
| 117 | Supply and fixing modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 118 | Supply and fixing modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 119 | Supply and fixing modular switch bell push 6 Amp 1 Module complete all as specified and directed. |
| 120 | Supply and fixing modular switch 2 way 6/10 Amps 1 module complete all as specified and directed. |
| 121 | Supply and fixing in repair ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed. |
| 122 | Supply and fixing in lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and directed. |
| 123 | Supply and fix in repair LED Adora Plus lamp 09 watt 2 star suitable for 240 volt complete all as specified and directed. |
| 124 | Supply and fixing in replacment of call multi Music type single phase 230 volt complete all as specified and directed. |
| 125 | Supply& fix switch piano type flush, single pole, one way 6 A 230 V, ISI marked complete all as specified and directed. |
| 126 | Supply& fix 2in 1 Socket outlet w/o Shutter, 5 pin, 6 Amp, flush type, 230 V, ISI marked complete all as specified and directed. |
| 127 | Supply & fixing in replacement of deluxe type electronic fan regulator Step type, 5 speed, 50 Hz, 230 V, ISI marked complete all as specified and directed. |
| 128 | Supply & fixing in replacement of switch socket combination 3/5 Pin, 6/16 Amp, 230 Volts with shutter complete with 2/4 Nos of fixing holes, ISI marked complete all as specified and directed. |
| 129 | Supply& fix only Angle/Batten lamp holder (Metal Ring) with back plate suitable for angle / batten fitting, ISI marked complete all as specified and directed. |
| 130 | Supply & fix double door metallic sheet metal enclosure for VTPB load line DB (IP-42/43) 04 way with bur bar, neutral link, blanking plates suitable for G Frame MCCB with busbar rating 160 Amps complete all as specified and directed. |
| 131 | Supply & fix MCCB TPN 63/100 Amps fixed thermal and magnetic releaese, 16 KA 415 Volt suitable for fixing in VTPB load line DB (IP-42/43) 12 way complete all as specified and directed. |
| 132 | Supply & fix wall mounted busbar system with 100 Amps, TPN, busbar made of ETP grade copper , 440 Volt, AC complete all as specified and directed. |
| 133 | S&Fixing MCB DB double door TPN 4 way 415 Volt complete all as specified and directed. |
| 134 | S&Fixing MCB DB double door SPN 12 way 240 Volt complete all as specified and directed. |
| 135 | S&F MCB TPN 63 Amp, 415 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 136 | S&F MCB SPN 40- 63 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 137 | S&F MCB SPN 20 to 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 138 | S&F MCB SP 6 to 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 139 | S&F in repairs E-Lite LED Pride Ultra NXT LED tube light fitting 20 watt, 6500 K, decorative ultra slim square profile LED lighting fixtures with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and directed |
| 140 | All as per item No 139 above but 10 watt |
| 141 | S&F in repairs PRIDE PLUS INVERTER BATTEN LED tube light fitting 20 watt, 6500 K, Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and battery back up time upto 10 hours and three step dimming energy efficient complete all as specified and directed. |
| 142 | Material and labour for fixing of street light bracket made out of 32/40 mm dia light grade GI pipe 1.5 mtr logn and bend to required shape to luminate the area complete all as specified and directed. |
| 143 | S&F building security light LED fitting with pressure die cast housing, epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25 watt, fixed / connect properly at directed location on building complete all as specified and directed. |
| 144 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-4 of SSR part No1 all as directed. |
| 145 | Material and labour for replacement of 20 Amps MCB Combo with sheet metal enclosure for Air conditioning with 20 Amps MCB complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender