Tender For Comprehensive Maintenance Work At Jcos And Or Married Accn Of Nco Academy At Dhana Miltary Station Under Age(I) Dhana
Tender Value
15 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
6 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Work At Jcos And Or Married Accn Of Nco Academy At Dhana Miltary Station Under Age(I) Dhana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 2 | Taking down chowket or frame exc 1.50 sqm but n. exc. 4.00 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sqm each complete all as specified and directed. |
| 4 | M&L for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed (125x60mm) complete all as specified and directed. |
| 5 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 6 | M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 7 | M/L for 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed. |
| 8 | S & F for factory solid PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube as per specified & drawing in opening complete all as specified and directed. |
| 9 | S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 10 | S & F Steel windows with side hung shutters (Double shutter glazing and mesh) including projecting type hinge with steel handle and steel peg stay, complete with glazing bars,and guard bars, dovetailed or welded.Glass and mesh measured and paid separtely complete all as specified and directed. |
| 11 | S/F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed. |
| 12 | Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns thick and black coated with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick outer or powder coated with ployster powder up to 50-60 microns thick outer frame section 72X55 mm, centre mullion section 72X50 mm, shutter section 47X20 mm, fly mesh section 40X20 mm and the fixed glass beading section 12X12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade mesh) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine monomer) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (minimum 4 nos for 1600 mm high windows, 3 nos for 1200 mm less window and 2 nos in ventilator), including 10 mm square bars welded to 6X12 mm flat at a distance 125 mm c/c etc complete all as specified and directed. Note - Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2. |
| 13 | S & F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tacks or galvanized wire staples or wooden bead complete all as specified and directed. |
| 14 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 15 | S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 16 | S & F in repair 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 17 | S&F for MS butt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked complete all as specified and directed. |
| 18 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 19 | S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 20 | S & F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 21 | S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 22 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane complete all as specified and directed. |
| 23 | 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each complete all as specified and directed. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 25 | S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed. |
| 26 | 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards , kitchen cabinat etc fixed in repairs complete all as specified and directed. |
| 27 | S & F Continuous (piano) hinges,width of flap when open is 30 mm mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 28 | S & F 75 mm long Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 29 | S & F hasp and stapple, safety type of Aluminium, anodised, including bolt to hinge type, fixed with screws of 100 mm complete all as specified and directed. |
| 30 | S & F in repair block boards 25mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 31 | S&F in repair Harrison rail mild steel ,chromium plated with fixing brackets,stops ,roller etc. complete all as specified and directed. |
| 32 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 33 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed. |
| 34 | Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in copings, bed plates and the like including weathering, slightly,water through etc complete all as specified and directed. |
| 35 | M&L for brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 36 | M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% complete all as specified and directed.( Note :Water proofing compound shall be measured and paid separatel) |
| 37 | Supply only integral water proofing compound complete all as specified and directed. |
| 38 | M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement. in CM (1:6) complete all as specified and directed. |
| 39 | M&L for 5mm rendering thick in CM (1:3) on concrete sufaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 40 | Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified and directed. |
| 41 | Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick above or below ground level complete all as specified and directed. |
| 42 | M & L for 25 mm thick PCC 1:2:4, typeB-O, using 12.5mm graded stone aggregate finished fair and even etc complete all as specified and directed. |
| 43 | 75mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in sub base of floor, hard standing, path, pavings etc, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified & directed. |
| 44 | M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed. |
| 45 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 46 | M&L Non skid ceramic coloured tiles 7mm to 8mm quare / rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors thick in floor etc set & jointed in neat cement slurry and pointed in white cement and pigment over 15mm screed bed or beading layer in CM 1:4 complete all as specified and directed. |
| 47 | M&L Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in dado/ skerting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 48 | M&L Glazed ceramic colour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed. |
| 49 | M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 50 | M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in dado/skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick backing coat in cement sand mortar 1:4 complete all as specified and as directed. |
| 51 | Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 52 | Rounding to edges of stone slabs one edge, such as in cooking plateform etc. and other similar situation complete all as specified and directed. |
| 53 | Material and labour for for 15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking plateform complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete all as specified and directed. |
| 54 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, complete all as specified and directed. |
| 55 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and directed. |
| 56 | Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed. |
| 57 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed. |
| 58 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed. |
| 59 | Taking up or down 20 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed. |
| 60 | S&F Vitreous china water closet Orissa pattern long pan size 580x440mm with trap front or back inlet and integral foot rest complete fixed in repair including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe complete all as specified and as directed. |
| 61 | S&F for in repair vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps , waste but including brackets as in repair, complete all as specified and directed. |
| 62 | S&F for 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 63 | S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed. |
| 64 | S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specfied and directed. |
| 65 | S & F in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed. |
| 66 | S & F in repair pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia complete all as specfied and directed. |
| 67 | S & F in repair 15 mm bore Stop valves, cast copper lloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 68 | S & Fixed in repairs Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 69 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 70 | S&F stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) 15 mm bore, screwed down, high pressure, screwed both end for iron pipe or for union complete all as specified and directed. |
| 71 | S & F repair in 10 ltr low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including brackets complete all as specified and directed. |
| 72 | S&F for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed. |
| 73 | M & L for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 74 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and directed. |
| 75 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore complete all as specified and directed. |
| 76 | S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed. |
| 77 | PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed. |
| 79 | PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 80 | Dismantling cast iron or reinforced concrete drain pipes of 75/100mm bore, fixed with walls and taking out of trenches, if required complete all as specified and directed. |
| 81 | Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 82 | Preparation of old wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 83 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete, all as specified and as directed. |
| 84 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 85 | M & L for complete removal of existing treatment and appllying two coats of cement base paint over a coat of primer and putty where required on wall including preparation of surfaces complete all as specified and directed. |
| 86 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 87 | Preparation to new surfaces of wall and applying 3 coat of white wash complete all as specified and directed. |
| 88 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed. |
| 89 | M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed. |
| 90 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying two coat of white wash complete all as specified and directed. |
| 91 | M& L for complete removal of existing treatment by scrapping, wire brushing from old walls and applying two coats of oil bound distemper including preparation of surfaces complete all as specified and directed. |
| 92 | M&L for applying a coat of 1.5 mm thick Birla wall care putty as per manufacture instruction complete all as specified and directed. |
| 93 | Taking down carefully existing aluminium/copper point wiring of any type/size (Light, fan, bell, socket, power socket etc complete with board outlet boxes fitting and fixtures such as switches, sockets, lamps holders, brackets, ceiling rose etc and removing from site and making good the disturbed surface of wall /floor etc to match existing complete all as specified and directed. |
| 94 | Taking down existing sub main wiring of any type/size complete from wall and making good distrubed surface complete all as specified and directed. |
| 95 | Taking down existing main switch /DBsw/ac box any type/size complete complete all as specified and directed. |
| 96 | Taking down carefully ceiling fan/exhasut fan (of any size/make) from the existing position complete all as specified and directed. |
| 97 | M&L for point wiring for one light point/fan Point controlled by one way switch with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC concealed Conduit pipe of suitable size as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc all as per site requirements including stainless steel terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green. |
| 98 | M&L for point wiring for one 5 Amp independent socket controlled by one way switch with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC concealed Conduit pipe of suitable size as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc all as per site requirements including stainless steel terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green. |
| 99 | M&L for point wiring for one 5 Amp socket controlled by one way switch on same board with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC concealed Conduit pipe of suitable size as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc all as per site requirements including stainless steel terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green. |
| 100 | All as per item No 99 here-in-before but for power point wiring with 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable for earth continuity complete all as specified and directed. |
| 101 | All as per item No 99 here-in-before but one call bell point controlled by one bell push button switch complete all as specified and directed. |
| 102 | M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :-(a) One light point controlled by two, 2- way switches. |
| 103 | Material and labour for sub main wiring with 2 x 6 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC conduit pipe of suitable size ISI marked including continuous running earth wire by 6 Sqmm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes completed all as specified and directed by Engr in Charge. |
| 104 | Supply and fixing modular plate with frame of 12 module complete all as specified and directed. |
| 105 | Supply and fixing modular plate with frame of 6 module complete all as specified and directed. |
| 106 | Supply and fixing modular plate with frame of 4 module complete all as specified and directed. |
| 107 | Supply and fixing modular plate with frame of 3 module complete all as specified and directed. |
| 108 | Supply and fixing modular plate with frame of 2 module complete all as specified and directed. |
| 109 | Supply and fixing modular switch 1 way 10 Amps 1 module complete all as specified and directed. |
| 110 | Supply and fixing modular fan regulator 2 module stepped type complete all as specified and directed. |
| 111 | Supply and fixing modular switch 1 way 16 Amps 1 module complete all as specified and directed. |
| 112 | Supply and fixing modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 113 | Supply and fixing modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 114 | Supply and fixing modular switch bell push 6 Amp 1 Module complete all as specified and directed. |
| 115 | Supply and fixing modular switch 2 way 6/10 Amps 1 module complete all as specified and directed. |
| 116 | Supply and fixing in repair ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed. |
| 117 | Supply and fixing in lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and directed. |
| 118 | Supply and fix in repair LED Adora Plus lamp 09 watt 2 star suitable for 240 volt complete all as specified and directed. |
| 119 | Supply and fixing in replacment of call multi Music type single phase 230 volt complete all as specified and directed by Engr in Charge. |
| 120 | S&Fixing MCB DB double door TPN 4 way 415 Volt complete all as specified and directed by Engr in charge. |
| 121 | S&Fixing MCB DB double door SPN 12 way 240 Volt complete all as specified and directed by Engr in charge. |
| 122 | S&F MCB TPN 63 Amp, 415 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 123 | S&F MCB SPN 40- 63 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 124 | S&F MCB SPN 20 to 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 125 | S&F MCB SP 6 to 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 126 | S&F in repairs E-Lite LED Pride Ultra NXT LED tube light fitting 20 watt, 6500 K, decorative ultra slim square profile LED lighting fixtures with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and directed |
| 127 | All as per item No 126 above but 10 watt complete all as specified and directed. |
| 128 | S&F in repairs PRIDE PLUS INVERTER BATTEN LED tube light fitting 20 watt, 6500 K, Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and battery back up time upto 10 hours and three step dimming energy efficient complete all as specified and directed. |
| 129 | M&L for refixing/handing of ceiling fan/exhaust fan and connection up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 130 | M&L for refixing of geyser and connection up including provision of cable from power point complete all as specified and directed. |
| 131 | Material and labour for fixing of street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr logn and bend to required shape to luminate the area complete all as specified and directed. |
| 132 | S&F building security light LED fitting with pressure die cast housing, epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 20 watt, fixed / connect properly at directed location on building complete all as specified and directed. |
| 133 | Taking down old serviceable electronic meter of any size and any capacity and refixing the same after completion of work at original site of work including necesary connection complete all as specified and directed. |
| 134 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-4 of SSR part No1 all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender