Tender For special Repair To Pufsh 864/01 & 02 At Kv Complex And Misc special Repairs At Brahmastra Lake At Pms Under Ge Panagarh (2Nd Call)
Tender Value
43.20 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
11 days left
EMD
86500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Pufsh 864/01 & 02 At Kv Complex And Misc special Repairs At Brahmastra Lake At Pms Under Ge Panagarh (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M & L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular ) polished , area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 15mm thick cement mortar 1:6 screed bed complete all as specified and directed. |
| 3 | M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 4 | Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm thick quality not less than group II, straight edge, , as in skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4.complete all as specified and directed. |
| 5 | S & F in repairs 3 mm plain fibre glass sheet fixed to framed iron work or in claddings/similar works complete all as specified and directed. |
| 6 | Supply and fixed in repairs floor mounted (single piece WC) bowl with cistern for coupled WC with and including UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set complete of size 380x655x765 mm with S Trap- 250 mm, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and directed. |
| 7 | Dismantling wall and ceiling board of any descrition complete all as specified and directed. |
| 8 | Supply and fix Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, size of grid 605 x 605mm complete all as specified and directed. |
| 9 | S & F anodised aluminium snap grid frame work for false ceiling (size of grid 605x605 mm) complete all as specified and directed. |
| 10 | S & F Non asbestos fibre cement designer building boards 6 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified. |
| 11 | S & F solid PVC prelaminated wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 12 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 13 | Dismantling of puf panels of any description complete all as specified and directed. |
| 14 | S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 15 | S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 16 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed. |
| 17 | M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square exc 0.50 sqm in each pan complete as directed. |
| 18 | Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each directed By Engr-in-charge. |
| 19 | S&F Factory made single extruded WPC ( Wood polymer composite ) 30 mm thick glazed and skeleton panelled door shutter comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives having minimum density of 650kg/cum and with property of being termite/borerproof,water/moisture proof and fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete as per direction of Engg-in-charge. |
| 20 | S&F 100 mm butt hinges medium weight cold rolled Stainless steel complete all as specified and directed. |
| 21 | S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed. |
| 22 | S&F aluminium handle 150 mm cast type anodised complete all as specified and directed. |
| 23 | S&F 40mm thick PUF roof panel fabricated with pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa, infill with CFC free PUF having density not less than 40 kg/m3 (Polyurethane Foam) sandwich panels with suitably designed fixed to roof with nut bolt or screws and jointed with silicon selant metal adhesive all as specified and directed. |
| 24 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 25 | M&L 18-20 mm thick Granite for cooking plartforms and like in CM 1:4 including pointing in white cement (1:2) including dismantling of old stone slab complete all as directed by Engr-in-Charge. |
| 26 | S&F18/19 mm thick, lead free PVC board Superior quality of density not less than 0.55 g/cm3 as in moduler shutters/cabimet drawer cupboard cabinet shutter including all frame work as specified and directed by Engr-in-Charge |
| 27 | S & F 50mm to 65mm stainless steel type handles for shelves and drawer boxes, complete all as specified and directed. |
| 28 | S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specifed and directed. |
| 29 | S&F stainless steel daddu kabja for kitchen/bedroom cupboards complete all as specifed and directed. |
| 30 | S & F 6mm Th frameless type looking mirror of size 650x450mm and mounted on 4 Nos stainless steel screws including SS plugs complete all as specifed and directed. |
| 31 | S & F 1mm th plain colour PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification, complete all as specified. |
| 32 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified. |
| 33 | M&L for preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. |
| 34 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed |
| 35 | S&F wind tie for roof including securing bolt including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 36 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and diected. |
| 37 | M&L for pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 10cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge. |
| 38 | M&L for Hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified. |
| 39 | M & L for Cement concrete (1:3:6) Type C2 using 40 mm graded aggregates as in foundations, filling and mass-concrete. complete all as specified. |
| 40 | M & L for Sand filling under floors or in foundation including watering and consolidation complete all as specifed and directed. |
| 41 | M & L for Machine pressed precast concrete interlocking paver block any shape and size, pre-polished confirming to IS 15658-2006 of 60 mm thickness, M- 35 Grade with grey cement and pigments. |
| 42 | M&L for Machine pressed precast concrete interlocking paver block any shape and size, pre-polished confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete as specified. |
| 43 | M & L for fixing PVC (SWR) pipes of 100 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 44 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for, complete all as directed. |
| 45 | M&L for 100mm thick PCC type C2, 1:3:6 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specifed and directed. |
| 46 | M&L for Providing, plain cement concrete type B0, 1:2:4 using 12.5mm graded aggregate in kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 47 | M&L for Providing and laying at or near ground levelfactory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 48 | M&L for 100mm thick Cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in sub base of floor complete all as specifed and directed. |
| 49 | S&F Reinforced concrete pipes of 300mm dia, class NP2, laid and jointed complete with collars complete all as specifed and directed. |
| 50 | Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soilNote : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding. |
| 51 | M&L for Cement concrete type (D-2) 1:4:8 using 40mm grded stone aggregate as in foundations, filling and mass concrete complete all as specified. |
| 52 | M&L, Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete, all as specified and as directed. |
| 53 | M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, mixed wth water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule. |
| 54 | M&L Plain cement concrete type B0, 1:2:4( using 12.5mm graded stone aggregate) as in benching, bed block, coping of brick walls incl necessary form work etc complete all as specified. |
| 55 | M&L, for preparation of new surfaces of brick, stone, concrete and asbestos cement or plaster surfaces of any description not otherwise described over 10 cm width or girth and applying Two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 56 | Removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point in oft/loose soil complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender