Tender For Addition/ Alteration To Internal Pipe And Associated Works In Phase-I Married Accommodation At Cgra Meenambakkam Under Ge (I) Cg Chennai
Tender Value
43 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration To Internal Pipe And Associated Works In Phase-I Married Accommodation At Cgra Meenambakkam Under Ge (I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | B/R Work |
| 2 | Taking down 20mm dia GI/ PVC steel tubing including all connections and fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Taking down 25 to 32 mm dia GI/ PVC steel tubing including all connections and fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Taking down 40 to 50 mm dia GI/ PVC steel tubing including all connections and fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed. |
| 6 | Supplying and Laying of 20mm bore C PVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and as directed. |
| 7 | Supplying and Laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and as directed. |
| 8 | Supplying and Laying of 50mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and as directed. |
| 9 | Material and labour for Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed. |
| 10 | Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 350x 450mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed. |
| 11 | Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 12 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each with fittings complete all as specified and directed. |
| 13 | Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed. |
| 14 | Supply and fix Vitreous china wash down water closet pan, pedestal pattern, floor mounted, colour white with all fittings including fixing bolts, flush pipe, Plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device (excluding flushing cistern) and P/S trap including connections to drain (or outgoing pipe) and taking down existing water closet etc., complete all as specified and as directed. |
| 15 | Supply and fix in repairs PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle, bracket, 32mm bore steel chromium plated flush pipe etc and connecting to WC and water pipe lines etc., complete all as specified and as directed. |
| 16 | Supply and fix in repairs health faucet (hand shower) chromium plated with 15 mm dia and 1500mm long flexible tube in chrome finish with wall hook screwed for two way bib taps/angle cock etc., complete all as specified and as directed. |
| 17 | Supply and Fix Soap dish brass chromium plated fixed with and including chromium plated brass screws with rawl plugs complete all as specified and as directed . |
| 18 | Supply and fix Chromium plated Toilet paper holder with flat recessed type stainless steel including cutting recess in wall complete all as specified and directed. |
| 19 | Supply and fix 20mm bib cock, brass Chromium plated, long body, fancy type with wall flange suitable for hot & cold water all as per Cat No.CON-037KN of Jaquar or Marc - MOY 1030 or G0206A1 of Parryware or equivalent of other specified makes complete all as specified and as directed. |
| 20 | Supply and fix 20mm two way bib cock, brass Chromium plated with wall flange suitable for hot & cold water all as per Cat No.CON-041KN of Jaquar or Marc - MOY 1380 or G5234A1 of Parryware or equivalent of other specified makes complete all as specified and as directed. |
| 21 | Supply and Fix in repairs 20mm bore dia Angle Stop valves, cast copper alloy, fancy type Chromium plated all as per Cat No.CON-053KN of Jaquar or Marc - MCT-1060 or G2707A1 of Parryware or equivalent of other specified makes screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and as directed. |
| 22 | Supply and Fix in repairs 20mm bore dia Pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts all as per Cat No.CON-021KN of Jaquar or Marc - MCO-1010 or T131SA1 of Parryware or equivalent of other specified makes screwed for iron pipe and fixed complete all as specified and as directed. |
| 23 | Supply and fix in repair Brass chromium plated shower rose of size 125mm with or without swivel joints complete all as specified and as directed. |
| 24 | Supply and Fix PVC Connection pipe, 20mm dia of 600mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed. |
| 25 | Supply and fix in repairs, fancy type looking mirror of size 600mm X 750mm with beveled edge mirror of selected quality glass, 6.0mm thick, mounted on commercial plywood/ MDF board and fixed with spacers to wall with wooden plugs and chromium plated brass screws etc., complete all as specified and as directed. |
| 26 | Supply & Fixing in repair CP Towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats all as specified |
| 27 | Supply and fix in repairs Gate/ Stop Ball brass valves of size 50mm dia, high pressure, with polythene float and fly nut complete and reducer of 50mm to 40mm if required, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 28 | Supply and fix in repairs in wall mixture valve, CP 20 mm dia for mixing hot & cold water all as per CON-281KN or T0314A1 of Parryware or equivalent of other specified makes screwed down for iron pipe and fixed to wall complete all as specified and as directed. |
| 29 | Supply and fix wall mounted bathroom cabinet mirror PTMT of size 600mm x 450mm or of next higher size on selected quality mirror 4 mm thick, with premoulded plastic frame of trade pattern 25 mm wide with 5mm thick PVC sheet backing for moisture proof fixed to wall with raw plugs and chromium plated brass screws and cup washers etc., complete all as specified and directed. |
| 30 | Supply and Fix in repairs Angle Stop valves (Concealed/open), cast copper alloy, fancy type Chromium plated all as per Cat No. CON-083KN of Jaquar or or Marc - MCT-1040 or G27083A1 of Parryware or equivalent of other specified makes screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and as directed. |
| 31 | Supply and fix in repair vitreous china counter wash hand basin snow white of miniumum size 560mm x 470mm (or)next higher size fixed in and including Granite slab of 20mm thick telephone black, machine polished in single piece of minimum size 900 mm x 600mm with necessary cutting and bevelling of exposed edges fixed with M-seal or Araldite to make leak proof joint and fixing of connected accessories of chromium plated brass coupling, 32mm bore Cast copper alloy chromium plated Bottle traps, Cast copper alloy chromium plated brass centre hole mixer, PVC braided connection (two numbers), 15mm bore Cast copper alloy CP angular stop cock (valve) etc., complete all as specified and as directed.Note : [a] Counter wash hand basin shall be of Cat Part No. 1005A of 'Cera' or equivalent model of other make specified in Particular specifications.[b] The unit rate quoted shall be deemed to include the cost of counter top WHB, 20mm thick telephone black machine polished granite slab, 32mm bore CP bottle trap, CP brass centre hole mixer, PVC braided connection - 2 Nos, 15mm CP angular stop cock and other fixing accessories. |
| 32 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc., complete all as specified and as directed. |
| 33 | Supply and Fix powder coated aluminium window and ventilator shutters, side hung type without sash bars, using aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, powder coated aluminium snap beading, screws, poder coated aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) etc., complete all as specified and as directed.Note : The unit rate quoted shall be deemed to include the cost Powder coated Aluminium frame for windows/ventilators shutters, Glass panes and wire mesh, builders hardwares etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender