Tender For Repairs To Masonary Works And Other B/R Works In Parade Ground And Other Locations At Chaubattia Under Ge Ranikhet.
Tender Value
27 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Masonary Works And Other B/R Works In Parade Ground And Other Locations At Chaubattia Under Ge Ranikhet.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc. complete all as specified and directed. |
| 2 | M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality- A complete all as specified and directed. |
| 3 | M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc. complete all as specified and directed. |
| 4 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 5 | M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base to flooring, complete all as specified & directed by Engr-in-charge. |
| 6 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 7 | Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed. |
| 8 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 9 | M & L Precast cement concrete block masonry with solid blocks PCC Type C1 (1:3:6) (using 20mm graded aggregate) exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 10 | M & L for providing cement concrete Type C1 (1:3:6) 20 mm graded in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling hollow of frame with plain cement complete all as specified and directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 12 | M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed. |
| 13 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.& removing rubbish to a distance not exc 250m complete all as specified and directed. |
| 14 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls with Ultra Tech READIPLAST by adding 17-19% of potable water by weight of material. for thickness above 15mm, it is recommended to be applied in multiple layers. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days- 10-12 Mpa/Bulk density-1500-1600 kg/cum. Note : The rate quoted by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height, complete all as specified and directed. |
| 15 | M&L preparation of newly plastered wall surfaces and applying two coat of weather proof paint over and including a coat of wall primer (Alkali resistant) including filling up of holes by wall care putty wherever required, complete all as specified and directed. |
| 16 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 17 | S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows, reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 18 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 19 | S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows, reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 20 | S&F in repairs Gun Metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified and directed. |
| 21 | M & L 100mm thick PCC 1:2:4 type B2 using (40mm grade agg) as in path, road, hardstanding, etc complete complete all as specified and directed by Engr-in-Charge. |
| 22 | M & L Forming 12mm expansion joint and filled with performed bituminous filler and top 30mm primed & sealed with sealing compound grade 'A' in concrete of thickness 100mm complete all as specified and directed. |
| 23 | M & L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed. |
| 24 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified & directed by Engr-in-charge. |
| 25 | S&F galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws complete all as specified and directed. |
| 26 | S&F 0.63mm thick mild steel plain sheeting, galvanised, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws in normal/nainital pattern, complete all as specified and directed. |
| 27 | Supplying and laying APP based modified water proofing polymeric membrane, reinforcemed with nonwoven polyester non wove fabric matt (weight not less than 150 gms/sqm) of minimum 3 mm thick and minimum weighing not less than 3 kg/sqm, laid over bituminous primer conforming to IS 3384-1965 @.30 KG/SQM to be applied on prepared surface and apply a coat of bitumen 85/25 grade @1.2 kg/sqm over primer, 15mm thick plastered sufaces layer in CM 1:4 with water proofing compound (WPC) @ 3% by weight on concrete surface roof / parapet, over lap of minimum 75 mm on longitudinal direction and 100 mm on the transverse direction by thermo-fused torch flame application method including taking down of existing roof treatement, complete all as specified and directed.Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency/ approved applicator only which will further have to do rectification of any defects if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender