Defence Statutory Bodies & Commissions/Committees Closing in 23 days TDR #56275992

Tender For Repairs/Replacement Of Generator/Comprehensive Lifts,Fire Fighting Equipements Motors/Jockey Pumps,Maintenance Of Lifts And Other Connected Allied Repair Works At Drdo Township, Nai, Chess, Dlrl & Dmrl Kanchanbagh, Hyderabad.

Issued by Statutory Bodies & Commissions/Committees · Hyderabad, Telangana
Tender Value
49 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
23 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs/Replacement Of Generator/Comprehensive Lifts,Fire Fighting Equipements Motors/Jockey Pumps,Maintenance Of Lifts And Other Connected Allied Repair Works At Drdo Township, Nai, Chess, Dlrl & Dmrl Kanchanbagh, Hyderabad.

BOQ

Name of Work:- REPAIRS/REPLACEMENT OF GENERATOR/COMPREHENSIVE LIFTS,FIRE FIGHTING EQUIPEMENTS MOTORS/JOCKEY PUMPS,MAINTENANCE OF LIFTS AND OTHER CONNECTED ALLIED REPAIR WORKS AT DRDO TOWNSHIP, NAI, CHESS, DLRL & DMRL KANCHANBAGH, HYDERABAD.
Sl. No. Item Description
1Comprehensive maintenance including renewal / replacement of defective parts of electric Lift (13 passenger lift) electrically operated with selective/collective control catering to six floors including , ground floor installed at building No. E-29, E-30, E-31, E-32, E-33 & E-34 at DRDO Township Kanchanbagh complete all as directed.
2Comprehensive maintenance of lifts like checking of ropes,door movements, limit switch, alignment of ropes and lift, lubrication, break panel, cable checking, normal and routine maintenance, repairs and replacement of spares of lifts of following capacities and makes complete all as directed.
3a)1.5 Ton capacity in analytical building at DMRL
4b)2.0Ton capacity in Ganga building at DLRL
5c)1.0 Ton capacity in krishna building at DLRL
6d)1.0 Ton capacity in main bldg director lift at DMRL
7e)2.0 Ton capacity in Kavari bldg lift at DLRL
8f)1.0 Ton capacity in Godawari bldg lift at DLRL
9f)1.5 Ton capacity in Main bldg lift at DMRL
10f)1.0 Ton capacity in New Admin bldg lift at DMRL
11NOTE for item 1 to 1.09 :- (i) Comprehensive maintenance includes all minor, major and consumeble repairs and replacement of spares/parts etc (comphrensive maintenance doesnot include repair/ replacement of car door/car cabin) ARD, Mother Board, Driver. (ii) lift inspection to be carried out by govt approved lift inspector once in 06 months & documentry proof to be submitted.(iii) Comprehensive maintenance shall be carried out by OEM i.e., M/s Omega Elevators, M/s OTIS Elevators and M/s UT Limited M/s Johnson Lifts Pvt Ltd. If company is closes then any reputed company as directed by Engineer in Charge(iv) Any lift complaints not attended within 2-3 hours a penalty of Rs 500 per compalaint for each hour there onwards would be charged against contractor.
12Testing and Refilling of Dry Chemical Powder type Fire Extinguisher 5 Kg. Capacity powder and CO2 gas catridge of 120 gms. Capacity confirming to IS: 2171.
13Testing and Refilling of Carbon – Di – Oxide type Fire Extinguisher 4. 5 Kg. Capacity CO2 gas confirming to IS: 2878
14Taking down old unserviceable hydrant valve and Supply, Installation, Testing and Commissioning of Single Headed Hydrant valve confirming to IS 5290 with ISI mark of size 63 mm dia oblique type with instantaneous hose coupling adaptor etc. with all neceesary fittng materials complete required.
15Taking down old unserviceable hydrant hose pipe and Supply, Installation, Testing and Commissioning of Hydrant hose pipe, 63 mm dia and 2x15 mtrs long RRL type with Gunmetal 63 mm size male coupling at one end and female coupling at the other end. It should with stand a burtsting pressure of 450 psi, rot proofed, with ISI mark. Hose shall comply to IS 636
16Taking down old unserviceable branch pipe and Supply, Installation, Testing and Commissioning of short Branch pipe with 63 mm female instanteneous inlet made of gun metal, male threaded outlet, complete with hexagonal based nozzle heavy quality confirming to IS 903 etc. as approved and as directed.
17Taking down old unserviceable hose reel pipe and Supply, Installation, Testing and Commissioning of Fire Hose Reel pipe 20 mm dia. X 30 mtr. Long, high pressure with 5 mm out let GM nozzle with shut off valve(IS: 884 - 1969) includes stop cock and chromium plated nozzle with all neceesary fixing materials complete all as directed.
18Replacement of Fire hyderant stand post both ends flanged 1 Mtr long with one end bent to 90 degrees suitable for long single fire hydrant valves including duck foot bend double end flanged and sluice valve all as specfied and directed.
19M&L for Scrapping of old existing paint of pipe lines for Fire fighting system of any sizes and applying two coats of enemel paint to match with the existing shade complete all as directed.Note - Rate quoted shall be deemed to include cost of Paint & tools.
20Scrapping of old existing paint of Fire cabinet (inside & outside) for Fire fighting system of any sizes and applying two coats of Red postal colour enemel paint. Note -Rate quoted shall be deemed to be include rates of Paint & tools.
21M&L for rewinding of the electric motor of 60 HP capacity duly disconnecting and taking down electric motor from the existing position and inspecting the same, transporting to workshop for repairs and bringing back. Cutting and removing the burnt out winding conductors rewinding the same with same gauge and weight of insulated super enamelled copper conductor and providing cotton insulated sleeves, varnishing, drying, refixing in position checking the alignment along with pump set connecting up with the electrical system, testing and commissioning complete all as directed.
22Repair and servicing of 7.5 to 12.5 HP Fire Fighting Pump and motor including all connecting parts by replacing gland, greasing & oiling and rectification of alignment of pump and motor, cleaning the carbon from the electrical connections and commissioning complete all as directed.
23Supply, fixing, testing and commissioning of Car Door Header Set and taking out old unserviceable one complelte all as directed.
24Supply, fixing, testing and commissioning of Auto Door controller and taking out old unserviceable one complelte all as directed.
25Supply, fixing, testing and commissioning of Collapsible Gate Controller and taking out old unserviceable one complelte all as directed.
26Supply, fixing, testing and commissioning of Controller wiring kit and taking out old unserviceable one complelte all as directed.
27Supply, fixing, testing and commissioning of Auto Door wiring kit and taking out old unserviceable one complelte all as directed.
28Replacement of matting in car cabin of 1 to 2 ton capacity Lifts complete all as directed.
29Supply, fixing, testing and commissioning of Microprocessor progammed Elevator/ Lift Contol Mother board suitbale for full collective lift serving upto G+5 floors, with and including software, taking out old u/s one, complete all as directed.
30Supply, install, testing and commissioning to automatic rescue device (ARD) includes Mirco processor programmed ARD Mother board,connected sensors complete comprising with the following accessories including taking out carefully old ARD from the machine room complete all as directed:- (a) UPS suitable for Lift Motor of goods/passenger lift - 01No.(b) Maintenance free dry battery suitable for UPS(12 V 17AH) of lift - 08 Nos.(c) SMPS - 01 No.(d) Transformer suitable to Lift motor - 01 No.
31Supply, fixing, testing and commissioning of Door Drive 2 HP, suitbale for existing lift of any make, with and including taking out old unserviceable door drive, complete all as directed.
32Supply, fixing, testing and commissioning of Variable Voltage Variable Frequency drive 10/12.5/15HP suitable for lift of any type with and including feeding necessary parameters and taking down old unserviceable drive, complete all as directed.
33Material and labour for enamel painting of lift cabin with spray painting metallic colour complete internally and doors, both cabin & loading type to match with existing colour including scraping & rubbing old paint complete all as directed.
34S &F in repairs Door curtain suitbale for existing lifts of 1 to 2 ton capacity of any make complete all as directed.
35S & F in repairs Car ceiling along with lights and fan suitbale for existing lifts of 1 to 2 ton capacity of any make complete all as directed.
36Maintenance of DG set and carrying out ‘B’ check and replacement of ‘B’ check kit filters such as Oil filter, by pass filter, fuel filter,CR element and CR plates complete with ‘O’ rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by the Engr-in-Charge for the following capacity DG sets:- Note :- 1. Engine oil shall be measured and paid separately. 2. B Cheak to be carried out every after 250 hrs run or 6 months whichever is earlier.
3740 KVA DG Set
3870 KVA DG Set
39100 KVA DG Set
40125 KVA DG Set
41160 KVA DG Set
42250 KVA DG Set
43625 KVA DG Set
44Renewal of unserviceable batteries with maintenance free batteries of 180 AH, 12V including connecting to DG set complete all as directed.
45Attending the breakdown of any capacity/make DG Sets, AMF Panels, by Technician & helper for checking all components and identifying and rectifying the faults and give report to concerned JE complete all as directed.Note :- Spare Parts for rectifying the fault shall be measured and paid seperately.
46S&F in repairs automatic voltage regulator (AVR) upto 625 KVA DG set and testing complete all as directed.
47Disconnecting all electrical connections from the unserviceable self starter of any make/ capacity model 24 volts, 180 /200 AH and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts such as bearing, carbon brushes, clutch plates etc refixing the self starter in its original position, testing and commissioning complete all as directed.Note:- Supply only Armature coil, field coil shall be measured and paid separately under relevant items of this Schedule fixing included in this item.
48Supply only Armature coil for self starter of any make of any capacity and of any model 24 Volts, 180/200 AH complete all as directed.
49Supply only of field coil for self starter of any make, any capacity and any model 24 Volts, 180 /200AH complete all as directed .
50Disconnecting all electrical connections from the unserviceable self starter of any make/capacity/model 12 volts, 180, 200 AH and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts bearing, carbon brushes, clutch plates etc refixing the self starter in its original position, testing and commissioning complete all as directed.Note:- Supply of Armature coil, field coil shall be measured & paid separately under relevant items of this Schedule.
51Supply only Armature coil for self starter of any make, any capacity and any model 12 Volts, 180/200 AH complete all as directed.
52Supply only of field coil for self starter of any make, any capacity and any model 12 Volts, 180/200 AH complete all as directed.
53S&F in repairs air cleaning element inner and outer with necessary ‘O’ rings for the DG sets of following capacities as that of existing make and model complete all as directed.
54S&F in repairs air cleaning element inner and outer with necessary ‘O’ rings for the DG sets of following capacities as that of existing make and model complete all as directed.
55Upto 110 KVA DG Set
56125 KVA to 160 KVA DG Set
57200 KVA to 625 KVA DG Set
58Renewal of battery cable leads of copper conductor with brass lugs terminal, for the 12V 180 /200 AH batteries for self stater as that of existing size and length complete all as directed.
59S&F in repairs automatic cut off Battery Charger suitable for 12 V, up to 10 Amp Battery complete all as directed .
60S&F in repairs automatic cut off Battery Charger suitable for 24 V, up to 10 Amp Battery complete all as directed.
61Renewal of existing unserviceable water temperature gauge for the DG set of any description complete all as directed.
62Renewal of existing unserviceable lubricant oil temperature guage for the DG set of any capacity complete all as directed.
63Renewal of existing unserviceable oil pressure gauge for the DG SET of any capacity complete all as directed .
64Renewal of unserviceable Solenoid switch for DG set of any make and any capacity complete all as directed.
65Supply and filling the new engine oil 15W/40 for toping up, upto the required level complete all as directed.
66Drain out the fuel from the fuel tank of DG set of capacity upto 1000 Ltrs and above and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat of synthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all as directed.
67Renewal of defective wiring with copper wire of existing size including replacement of electrical/ electronic parts of AMF panel & DG Set, complete all as directed.Note: - Supply only Electrical/ Electronic spare parts shall be measured and paid separately.
68Supply only of following spare parts :Auxiliary contactor 240 Volts, (2NO.+2NC).
69ON and OFF delay timer 240 V AC and 24 V DC.
70Over load relay.
71ML - 4 contactor.
72Earth Fault Relay IRII-31-E1-WD Suitable for 250 V, AC. Make: C&S
73Single phase preventer
74Auxiliary Relays 24Volts / 6A
75PLC based AMF relay unit
76Low lube oil safety switch
77LED indicating Lamp
78Push buttons
79Selector switches
80Removing the defective charging dynamo of capacity 24 Volt DC any make, model, any capacity and opening it, by removing all nuts and bolts, cleaning with necessary cleaning agent and overhauling lubricating of the same replacing of armature, field coils reconnecting the same, refixing back, in original position testing and commissioning complete all as directed.
81Supply & topping up of Inhibitor corrosion (coolant additive concentrate) as required complete all as directed.
82Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed.
83Dismantling/taking out old unserviceable alternator (charging of battery) and taking out worn out spares such as ammeter, brush and field winding and repair the same by replacing ammeter, brush and rewinding of field coil with same guage of copper wire and testing complete all as directed .
84Calibration of PT pump and replacement of PT Pump kit, gear gasket, etc whichever is required for smooth functioning of DG Set complete all as directed.
85Calibration of injectors by replacing injector cup, barrel plunger for smooth functioning of engine, testing complete all as directed .
86S&F PVC insulated, heavy duty, unshealted , multi Stranded Copper Cable of 35 Sqmm single core with suitable size lugs crimped on both side complete all as directed.
87S&F of 12 V 7AH battery for UPS/ARD of lifts Please Enable Macros to View BoQ information
88S&F of 12 V 7AH battery for UPS/ARD of lifts Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56275992
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 27-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs/Replacement Of Generator/Comprehensive Lifts,Fire Fighting Equipements Motors/Jockey Pumps,Maintenance Of Lifts And Other Connected Allied Repair Works At Drdo Township, Nai, Chess, Dlrl & Dmrl Kanchanbagh, Hyderabad.
Basic Detail
Tender No 8229
Bidding Type Tender
Location
City Hyderabad
State Telangana
Key Dates
Publish Date 02 Jul 2026
Submission Date 27 Jul 2026
Open Date 29 Jul 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Available
Document List
7e1b6d6a-948a-41c2-8ab8-ff06959350e1.html
BOQ_868900.xls
Tenderdocument.pdf
Tendernotice_1 (2).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 23 days
Jul 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
html

7e1b6d6a-948a-41c2-8ab8-ff06959350e1.html

xls

BOQ_868900.xls

pdf

Tenderdocument.pdf

pdf

Tendernotice_1 (2).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders