Tender For special Repair/Replacement Of Perimeter Security Lights Of Various Sectors And Connected Items Under Ge Nagrota
Tender Value
46 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
16 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/Replacement Of Perimeter Security Lights Of Various Sectors And Connected Items Under Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair LED street light fitting of capacity 45W of epoxy powder coated pressure die cast aluminium housing with toughened glass with Lens delivering (efficiency) : 120 lumens/ watt, and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed.Note for item No. 1 to 8 :- 1. Contractor shall be submitted the warranty cert from the manufacturer for 02 years before payment and contractor is responsible for to repair/replacement the unserviceable fitting on free of cost from the manufacturer for the period of 02 years from payment date. 2. 02 years warranty certificate from the manufacturer , purchase voucher and LM-79 & LM-80 certificate before payment. |
| 2 | S&F in repair LED street light fitting of capacity 60W of epoxy powder coated pressure die cast aluminium housing with toughened glass with Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed. |
| 3 | S&F in repair LED street light fitting of capacity 72W of epoxy powder coated pressure die cast aluminium housing with toughened glass, Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed. |
| 4 | S&F in repair LED street light fitting of capacity 90W of epoxy powder coated pressure die cast aluminium housing with toughened glass, Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed. |
| 5 | S&F in repair of LED flood light capacity 100W of epoxy powder coated pressure die cast aluminium housing with toughened glass, Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light sourcecomplete all as specified and directed. |
| 6 | S&F in repair of LED flood light capacity 120W of epoxy powder coated pressure die cast aluminium housing with toughened glass, Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed. |
| 7 | S&F in repair of LED flood light capacity 150W of epoxy powder coated pressure die cast aluminium housing with toughened glass, Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed. |
| 8 | S&F in repair of LED flood light capacity 180/200W of epoxy powder coated pressure die cast aluminium housing with toughened glass, Lens delivering (efficiency) : 120 lumens/ watt and high performance driver with built in surge , over voltage, open/short circuit protection for longer life, IP-66 protection, 50000 burning hours including making connection with two core PVC insulated and sheathed copper conductor cable of size 1.50 sqmm from fitting to light source complete all as specified and directed. |
| 9 | S&F in repair Junction box made of SMC/FRP sheet ready made of size 300 mm x 200 x 105 mm having 100 A Capacity RYB and neutral aluminium bus bar of 3 mm thick duly fitted on suitable insulator, and MCB SP 6 A 10 KA 240V -01 No. with fixing arrangement fixed properly to pole/fixed on wall with MS Clamps 25x5 mm and nut and bolts complete all as specified and directed. |
| 10 | Supply and fixing in replacement of automatic street light switch using Nature Switch for automatic switching of street light based on LUX level of nature light having ON ≤ 30 lux and OFF ≥ 10 Lux . The sensor (Nature Switch) along with suitable power contactor , MCB and support termianl should be enclosure made of rust proof, electric shock proof , termite proof and FRLS grade SMC junction box(sintex make) conforming to confirmining IS 13947.4-1 & IS 8828, IP 66 including contactors ( 3 Nos each) and incoming- ourgoing MCBs ( 3 Nos each) rating of 25-40 amp and Circuit copper wiring of min 10 Sqmm cable incl taking down old unsv complete all as specified and directed. |
| 11 | S&F in repair Steel tubular swaged pole type 410 SP-31 (09 mtr long) with 300x300x6mm mild steel plate continuously welded to pole , finial taper plug, bolts, nuts and screws complete all as specified and directed including painted with black bituminous paint internally and externally with anti corrosive paint in alternate black and white strips 30 cm each up to 1.5 mtr height from top edge of concrete and remaining pole with two coats of aluminium paint over a coat of red oxide primer including writing the number etc complete all as specified and directed.Note: Excavation and Earth work, PCC in foundation and copping shall be measured and paid separately. |
| 12 | Supply and fixing In replacement of old unserviceable bracket with Angle iron bracket round in shape fixed on top of pole as per sample with nut bolts suitable size for fixing of 04 Nos flood lights of 120 to 180 watt including making connection with PVC insulated and sheathed copper conductor cable of size 2.5 sqmm from junction box to light fittings complete all as specified and directed. |
| 13 | Supply, laying, jointing and testing in repair XLPE cable insulated,armoured, heavy duty electric cable with aluminium conductor,1100 volts grade, cross-sectional area 10 Sqmm 4 core complete all as specified and directed . |
| 14 | Excavation in trenches in soft/loose soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out incl. taking out old unserviceable cable complete all as specified and directed. |
| 15 | Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth for foundation, etc or not exceeding 10 Sqm on plan and exceeding 1.5m but not exceeding 3m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in Soft/loose soil complete. |
| 16 | Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed. |
| 17 | Removing excavated surplus soil to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 18 | M & L for Sand cushioning to under ground cable laid in trenches for laying of LT UG cable 8 cm depth before laying the cable and 15 Cm after laying and punned down to depth of 10 cm as per MES SSR Part -I ( 2009) complete all as specified and directed. |
| 19 | M & L for Brick covering abutting each other with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat complete all as specified and directed. |
| 20 | PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified and directed. |
| 21 | PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified and directed. |
| 22 | PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping/above ground level around the pole etc including necessary formwork complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender