Tender For Repair/Replacement Of Unserviceable Internal Wiring Electrical Fittings, Repairs Of Ceiling Fans/Exhaust Fans And Street Lights And Perimeter Lights At Dlrl Kanchanbagh, Hyderabad.
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
20 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Unserviceable Internal Wiring Electrical Fittings, Repairs Of Ceiling Fans/Exhaust Fans And Street Lights And Perimeter Lights At Dlrl Kanchanbagh, Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for sub main wiring with 2 runs of 2.5 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 Volts grade multistranded drawn through non metallic rigid PVC conduit ISI marked 25 mm dia including conduit accessories concealed/surface type on walls, roof, floors etc including one run of 2.5 Sqmm PVC copper conductor as earth continuity wire including taking down unserviceable sub main wiring including conduit all as specified and directed. Note : 2 Runs of 2.5 sqmm cable 1 run of 2.5 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment. |
| 2 | All as per srl item No. 1 here-in-before but with 2 runs 4 sqmm including 1 run of 4 sqmm PVC copper conductor FRLS cable as earth continuity wire in not less than 25mm dia ISI marked PVC conduit..Note : 2 Runs of 4 sqmm cable 1 run of 4 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment. |
| 3 | All as per srl item No. 1 here-in-before but with 2 runs 6 sqmm including 1 run of 6 sqmm PVC copper conductor FRLS cable as earth continuity wire in not less than 25mm dia PVC conduit.Note : 2 Runs of 6 sqmm cable 1 run of 6 sqmm cable and 1 run of PVC conduit shall measured as one unit for the purpose of payment. |
| 4 | All as per srl item No. 1 here-in-before, but sub main wiring with 4 runs of 4sqmm with 2 run of 4 sqmm copper conductor FRLS as earth continuity wire in not less than 25mm dia PVC conduit.Note : 4 Runs of 4 sqmm cable 2 run of 4 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment. |
| 5 | All as per srl item No. 1 here-in-before, but sub main wiring with 4 runs of 6 sqmm with 2 run of 6 sqmm copper conductor FRLS as earth continuity wire in not less than 25mm dia PVC conduit.Note : 4 Runs of 6 sqmm cable 2 run of 6 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment. |
| 6 | All as per srl item No. 1 here-in-before, but sub main wiring with 4 runs of 10 sqmm with 2 run of 10 sqmm copper conductor FRLS as earth continuity wire in not less than 25mm dia PVC conduit.Note : 4 Runs of 10 sqmm cable 2 run of 10 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment. |
| 7 | Taking down old unserviceable point wiring (Light, Fan, Socket or power) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good to the disturbed surfaces of walls,ceilings and floor etc complete all as directed |
| 8 | Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit 20 mm or higher dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, concealed/surface type on stone/brick masonry walls, roofs, floors etc by means of saddles and clamps etc including PVC gang boxes as required at site for concealed/surface conduit wiring and modular plates & covers as required at site for housing switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated multistranded unsheathed FRLS copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for and connecting up complete for the following:-One light/ fan point controlled by one, one way switch |
| 9 | One light point controlled by one, two way switch |
| 10 | One 5 Amps socket point on independent board. |
| 11 | One 5 Amps socket point on same board with other switches |
| 12 | All as per item No. 8 here-in-before but wiring with 2.5 Sqmm FRLS for 15 Amps switch socket combination on independent board/two pin earth plug and socket including providing 4 Sqmm PVC insulated multi stranded FRLS copper earth continuity conductor and connected to common earth dolly. |
| 13 | All as per item No. 8 here-in-before but wiring with 4.00 Sqmm FRLS for 15 Amps switch socket combination on independent board/two pin earth plug and socket including providing 4 Sqmm PVC insulated multi stranded FRLS copper earth continuity conductor and connected to common earth dolly. |
| 14 | S&F in replacement for Modular socket 6A 2/3 Pin 2 module. |
| 15 | S&F in replacement for Modular socket 16A 2/3 Pin 2 Module. |
| 16 | S&F in replacement for modular switch 1 way 6A 1 module. |
| 17 | S&F in replacement for modular switch 1 way 16A 1 module. |
| 18 | S&F in replacement of modular/piano fan regulator 120W,240V, 1 module, suitable for ceiling fan of 1200/1400mm sweep. |
| 19 | S&F in replacement of modular/piano fan regulator 120W,240V, 2 module, suitable for ceiling fan of 1200/1400mm sweep. |
| 20 | S&F in replacement for modular switch 2 way 6A 1 module. |
| 21 | S & F in replacement of switch piano flush type 5 Amps SP one way all as specified. |
| 22 | S & F in replacement of switch piano flush type 15 Amps SP one way all as specified. |
| 23 | S & F in replacement of socket & switch combination 5 Amps flush mounted 3/5 pin multi purpose all as specified. |
| 24 | S & F in replacement of socket & switch combination 5/15 Amps flush mounted 3/5 pin multi purpose all as specified. |
| 25 | S&F in replacement for ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body. |
| 26 | S& F in replacement surface mounting Plastic gang boxes along with plate suitable for modular switches 3 module. |
| 27 | All as per item no.21 above, but of size 4 Module all as specified |
| 28 | All as per item no.21 above, but of size 6 Module all as specified |
| 29 | All as per item no.21 above, but of size 8 Module all as specified |
| 30 | All as per item no.21 above, but of size 12 Module all as specified |
| 31 | PVC / polycarbonate Angle/Batten type lamp holders retrofit type |
| 32 | S&F in replacement of LED tube 20Watt, 6500K CCT, professional luminaries with luminous efficiency not less than 120Lm/watt, Single side connection with < 10% THD incluidng taking down of exisitng fixture all as specified and directed. |
| 33 | S&F in replacment indoor industrial type surface/wall mounted LED integral batten 20W (4 feet), 6500K CCT, aluminium extruded body and polycarbonate diffuser, <10%THD, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. . |
| 34 | S&F in replacment indoor industrial type surface/wall mounted LED integral batten 10W (2 feet), 6500K CCT, aluminium extruded body and polycarbonate diffuser, <10%THD, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed.. |
| 35 | S&F in replacment indoor industrial type recess mounted LED Surface mounted for POP/Grid ceiling round/square downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency.15W, 6500K CCT, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable as required at site with suitable size complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. |
| 36 | Supply & Fix in replacement recess mounted LED luminaire 36W 2'x2' , 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for Grid/POP ceiling or similar mounting system with concealed or exposed 'T' sections, Glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. |
| 37 | S&F in replacement recess mounted LED high bay light with IP-66 protection pressure die cast body with high power SMD LEDs as light source of luminous efficacy 150lm/watt 120W, 240V, 5000K CCT, aluminium heat sink alongwith inbuilt elctronic driver, wide beam angle , including hanging the fitting with required hook arrangement required at site, complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. |
| 38 | S&F in replacement 25 W LED security light fiitting of luminous capacity 2500lumens,IP-66 protection, 5700K CCT, inbuilt electronic driver with <10%THD made up of die cast aluminium housing with high power LED as lighting source and lens embeded toughned glass cover, separate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade 1.5Mtr long bend to shape and fixed to pole/wall with necessary MS clamp accessories,complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. |
| 39 | All as per item no 33 above but of rating 70 W all as specified and directed by Engr In charge. |
| 40 | All as per item no 33 above but of rating 100 W all as specified and directed by Engr In charge. |
| 41 | Taking down ceiling fan/exhaust fan/ wall mounted fan / Air circulator fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed.Note : 1. Cost of spares such as capacitors, bearings, Shaft etc will be measured and paid for separately under respective Item of sch A as supply only. |
| 42 | Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan. |
| 43 | Supply only capacitor of 4 mfd for air circulator/exhaust fan. |
| 44 | Supply only bearing No.6201/6202/6203/6204 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan. |
| 45 | Supply only carbon steel shaft as suitable for ceiling fan/Exhuast fan/ Pedestal Fan/ Air Circulator fans matching to the existing size. |
| 46 | Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor and cleaning the stator completely removing the burnt sludges from the slots and rewinding with super enameled copper winding wire of suitable gauge or of matching size to the existing wires with same turns ratio including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position all as directed by Engineer-in-charge. |
| 47 | Ceiling fan of size 1200/1400mm sweep. |
| 48 | Air circulator fans size 600 mm sweep wall mounting Oscillating type |
| 49 | Wall mounted/Pedstal fans size 350/450 mm sweep Oscillating. |
| 50 | Exhaust fan of 300/350/450 mm sweep. |
| 51 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SI PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 52 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SI PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender