Tender For Day To Day Maintenance & Petty Repairs Of Otm & Md Accn Under Age B/R-Ii Of Ge Dehradun.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance & Petty Repairs Of Otm & Md Accn Under Age B/R-Ii Of Ge Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Supply and fixing in repair of bib cock PTMT standard 15 mm dia with capastan head, complete male or female as reqd and as directed by Engineer-in-charge. |
| 3 | Supply and fixing in repair of short body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed. |
| 4 | Supply and fixing in repair of long body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed. |
| 5 | Supply and fixing in repair of 15 mm dia angle cock/ angle valve/ stop valves chromium plated with capstain head screwed down high pressure complete all as specified and directed. |
| 6 | Supply and fixing in repair of 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed. |
| 7 | Supply and fixing in repair of wall mixer/L bend mixer 15 mm dia, Brass Chromium plated complete all as specified and directed. |
| 8 | Supply and fixing in repair of centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified and directed. |
| 9 | Supply and fixing in repair of sink mixer 15 mm dia, Brass Chromium plated complete all as specified and directed. |
| 10 | Supply and fixing in repair of Waste fittings/sink couplings 32 mm brass chromium plated for sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 11 | Supply and fixing in repair of vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed. |
| 12 | Supply and fixing in repair of Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device complete all as specified and directed. |
| 13 | Supply and fixing in repair of Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and waste up to floor trap and fixed complete all as specified and directed. |
| 14 | Supply and fixing in repair of vitreous china rimless single piece WC of size 385 x 720 x 710 mm with UF sift close slim seat cover, hinges, fixing accessories and dual flushing cistern complete all as specified and directed. |
| 15 | Supply and fixing in repair of Looking Mirror 5 mm thick size 600 x 450 mm fixed on commercial ply wood 6 mm thick with PVC/wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers and fixed complete all as specified and directed. |
| 16 | Supply and fixing in repair of PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed |
| 17 | Supply and fixing in repair of health faucet ABS Body suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 18 | Taking down shutters of any description nexc 1 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed. |
| 19 | Description all as per serial item No 17 above but exc 1 sqm and nexc 2 sqm each complete all as specified and directed. |
| 20 | Resecuring or easing & adjusting, without taking down shutter of any description nexc 1 sqm each complete all as specified and directed. |
| 21 | Description all as per item ser No 19 above but exc 1 sqm and nexc 2 sqm each complete all as specified and directed. |
| 22 | Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed. |
| 23 | Description all as per ser Item No 21 above but n.exc 1.5 sqm each complete all as specified and directed. |
| 24 | Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each and removing from the site complete all as specified and directed. |
| 25 | Supply and fixing of 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 26 | Supply and fixing of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 27 | Supply and fixing of stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed. |
| 28 | Supply and fixing of PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed. |
| 29 | Supply and fixing of factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed. |
| 30 | Supply and fixing of SS Butt Hinges medium weight 100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 31 | Supply and fixing of stainless steel barrel tower bolts 150 mm size with bright bolt fixed in repairs complete all as specified and directed. |
| 32 | Supply and fixing of stainless steel handles 150 mm size complete fixed complete all as specified and directed. |
| 33 | Supply and fixing of stainless steel sliding door bolts 'bolt type' 250 mm size and including 6 nuts and bolts complete fixed in repairs complete all as specified and directed. |
| 34 | Supply and fixing in repair of Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified and directed. |
| 35 | Supply and fixing in repair of 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed. |
| 36 | Supply and fixing in repair of stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed. |
| 37 | Supply and fixing in repair of cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed. |
| 38 | Supply and fixing in repair of 75mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 39 | Supply and fixing in repair of MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified and directed. |
| 40 | Supply and fixing in repair of stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with chromium plated screw complete all as specified and directed. |
| 41 | Supply and fixing in repair of 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge. |
| 42 | Supply and fixing in repair of 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 43 | Supply and fixing in repair of 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, solvent cement/ adhesive , complete all as per specifications & directed. |
| 44 | Supply and fixing in repair of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 45 | Supply and fixing in repair of chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 46 | Supply and fixing in repair of chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 47 | Supply and fixing in repair of chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 200 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. |
| 48 | Supply and fixing of Ball bearing runners 45 mm Telescopic full extension load capacity 50 kgs complete all as specified and directed. |
| 49 | Supply and fixing of magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 50 | Supply and fixing of continuous (PIANO) hinges, stainless steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 51 | Supply and fixing of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed including hacking out old glass complete all as specified and directed. |
| 52 | Description all as per serial item No 50 above but frosted glass complete all as specified and directed. |
| 53 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed. |
| 54 | Material and labour for coloured vitrified light shade tiles of any design and pattern, 600x600x8-9 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed |
| 55 | Description all as item No 53 above but as in skirting/dado over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 56 | Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 57 | Description all as per item No 55 above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 58 | Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 59 | Demolition of cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 60 | Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring finishing the surfaces even & smooth without using extra cement complete all as specified and directed. |
| 61 | Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 62 | Material and labour for factory made pre polished rubber moulded vibromatic Chequred cement concrete colour tiles of size 30 cm x 30 cm and 22 to 25mm thick, set jointed and pointed in neat cement slurry @ 3.0 Kg/Sqm with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed. |
| 63 | Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 64 | Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 65 | Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed. |
| 66 | Supply and fix in repair granite 16-18mm thick of Zed Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like with approved adhesive incl pointing in coloured grout complete all as specified and directed. |
| 67 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 68 | Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 69 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 70 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 71 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed. |
| 72 | Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed. |
| 73 | Material and labour for preparation of new plastered surface of walls and applying two coats of cement base paint over complete all as specified and as directed. |
| 74 | Material and labour for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 75 | Material and labour for preparation of old plastered surface of walls including corners and applying two coats of OBD complete all as specified and directed. |
| 76 | Material and labour for preparation of old plastered surface of walls including corners and applying one coat of OBD complete all as specified and directed. |
| 77 | Material and labour for preparation of old plastered surface of ceiling and applying three coats of white wash on ceiling, off sets, pillar etc all as directed and specified. |
| 78 | Material and labour preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed. |
| 79 | Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces complete all as specified and directed. |
| 80 | Supply and fixing of medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. |
| 81 | Supply and fixing of medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. |
| 82 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good existing surface, cutting exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and directed. |
| 83 | Supply and fixing in repair of PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed. |
| 84 | Description all as per serial item No 82 above but 15 mm size complete all as specified and directed. |
| 85 | Material and labour for cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 86 | Description all as per serial item No 84 above but capacity of water tanks exc 500 ltr and not exc 1000 ltr complete all as specified and directed. |
| 87 | Supply and fixing of PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank including dismantle of old water tank and removing from site. complete all as specified and directed. |
| 88 | Description all as item no 86 but 1000 Ltr capacity of tank complete all as specified and directed. |
| 89 | Attending complaints like leakge of taps, angle valve, stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves, water tanks, WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing a experienced plumber and a helper to restore the exiting/services to the satisfaction of Engineer-in-Charge by using stores issued by the deppt all as directed. |
| 90 | Attending complaints related to carpenter work including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing experienced carpenter with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept all as directed. |
| 91 | Attending complaints related to black smith work including resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept all as directed. |
| 92 | Attending complaints related to Cleaning of blocked WC seat of pedestal/squatt pattern, blocked floor trap of bath room & kitchen etc upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water including cleaning of 1st manhole and removing the waste material/sludge etc to a distance nexc 300m and burning the same in pits complete all as specified and directed by Engineer-in -charge. |
| 93 | Dewatering and cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material/sludge etc to a distance n.exc 300m and burrying in a pit complete all as specified and directed. |
| 94 | Taking out & removing existing roof treatment of any description completely upto concrete surface including racking out joints, hacking for key,sweeping clean and scrubbing down with water etc to remove dust etc, complete all as specified. |
| 95 | Material and labour for brushing neat cement slurry @ 3 Kg of cement per Sqm on cleaned roof/wall surface complete all as specified. |
| 96 | Material and labour for rendering 10 mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement in roof surface , complete all as specified and as directed.(Note- WPC shall be measured and paid separetely.) |
| 97 | Supply only integral water proofing compound as per manufacturers instructions ,complete all as specified. Please Enable Macros to View BoQ information |
| 98 | Supply only integral water proofing compound as per manufacturers instructions ,complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender