Tender For Provision Of Ladies Toilet Behind Hindi Classroom Of Edn Section At Afro At Camero Complex, Provn Of Works Station (Qty-05) At Dit At Camero Complex, Special Repair For Replacement Of Ber Cooling Appliances Of Camero Complex, Provision Of
Tender Value
46.39 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
16 days left
EMD
92780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Ladies Toilet Behind Hindi Classroom Of Edn Section At Afro At Camero Complex, Provn Of Works Station (Qty-05) At Dit At Camero Complex, Special Repair For Replacement Of Ber Cooling Appliances Of Camero Complex, Provision Of Spare Vcb Trolley At Dit Sub Station Camero Complex Subroto Park & Provn O 25 Ltrs Geyser For Certain Omq Of Camero At Subroto Park.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes etc n.exc. 10 sqm on plan and n.exc. 1.5m in depth, getting out in Hard/Dence soil complete all as specified and directed. |
| 3 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 6 | M & L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 7 | M & L Reinforced cement concrete Design mix (M-25) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed. |
| 8 | M & L Reinforced cement concrete Design mix (M-25) as in Slabs supported on walls, ,chajjas, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 9 | M & L Reinforced cement concrete Design mix (M-25) as in roof beam, plinth beam,roof beam, lintel beams and Columns complete all as specified and directed. |
| 10 | M & L Reinforced cement concrete Design mix (M-25) as in chajjas complete all as specified and directed. |
| 11 | M & L reinforced cement concrete Design mix (M-25) as in Columns, footing, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, roof beam, plinth beam, slab,chajjas and similar work hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | Ditto all as per item no 12 but 5 mm dia and over up to and incl 8mm dia as in stirrups complete all as specified and directed. |
| 14 | M& L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed. |
| 15 | M& L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directed. |
| 16 | M& L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 17 | M& L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 18 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 19 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed . |
| 20 | Material & labour for 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces of walls , surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Material & labour for 15 mm thick rendering in CM 1:4 on brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | Material & labour for 5 mm thick rendering in CM 1:3 on brick work or concrete surfaces of ceiling , surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for preparation on new or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat exterior primer applied @ 0.90 litre/ 10 sqm new surfaces up to four stories bldgs complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling surface complete all as specified and directed. |
| 26 | S&F aluminium frame powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed. |
| 27 | S&F aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl powder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified and directed. |
| 28 | S & F for galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified and as directed. |
| 29 | M&L for figured glass pine head type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan complete all as specified and directed. |
| 30 | M&L for Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM 1:6 complete all as specified and as directed. |
| 31 | M&L for glazed ceramic coloured tiles 450mm x 300 mm size 6 to 7mm thick in dados or skirting over & including rendering 10mm thick in CM 1:4 jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles complete all as specified and as directed. |
| 32 | S&F Vitreous China wash basin white ovel shape counter top of size 430mmx345mm including PVC waste pipe of 32mm dia of suitable length, 32mm dia brass waste fitting and all fitting complete all as specified and as directed. |
| 33 | S&F one piece Vitreous China wash down water closet pan, white (including fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, Plastic water closet seat, black / white , closed pattern with flat bottom with necessary fixing and cover etc. complete all as specified and as directed. |
| 34 | S & F PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks/urinals outlet complete all as specified and directed. |
| 35 | S & F 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed. |
| 36 | S&F for 75 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing and etccomplete all as specified and directed. |
| 37 | S & F PVC bends 75mm bore, any radius complete all as specified and directed. |
| 38 | S&F PVC (SWR) pipes of dia 110 mm single socketed in any length with rubber ring joints laid in trenches or in floors of dia 110 mm complete all as specified and directed. |
| 39 | S&F PVC (SWR) pipes of dia 75 mm single socketed in any length with rubber ring joints fixed to walls of dia 75 mm complete all as specified and directed. |
| 40 | S & F Bib taps (push type) cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 41 | S&F of fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 42 | S&F 15 mm pillar taps for wash hand basin with capstan heads, chromium plated screwed down high pressure, fancy type with handle complete all as specified and directed. |
| 43 | S & F stop/angle cock cast copper alloy high pressure, angle valve type, chromium plated suitable for 15mm bore steel pipe complete all as specified and directed. |
| 44 | S&F of brass chromium plated health faucet with S.S. flexible pipe of 1.00 to 1.50 metre length including holder complete all as specified and as directed. |
| 45 | S & F PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified and directed. |
| 46 | S & F 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified and directed. |
| 47 | S & F 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified and directed. |
| 48 | S&F 15mm bore Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 49 | S & F of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 50 | S & F rotational moulded polythylene 500 Ltr capacity water storage tank (double layer)(cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed. |
| 51 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 52 | S & F mild steel CP Toilet paper holder, complete all as specified and directed. |
| 53 | S & F corner shelf of 300 mm size with ABS brackets complete all as specified and directed. |
| 54 | M&L 5mm thick frame less mirror with chromium plated brass clam screws and cup washers or fixing arrangement to wall complete all as specified and directed . |
| 55 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 56 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. |
| 57 | S & F stainless steel butt hinges 100 mm long complete all as specified and directed. |
| 58 | S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed. |
| 59 | S&F 150 mm size aluminium anodized handle complete all as specified and directed. |
| 60 | S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 61 | M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (one coat for bonding material below membrane) complete all as specified and directed. |
| 62 | M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 63 | M&L for 10 mm thick cement mortar 1:4 on fair faces of brick or concrete surfaces with integrlal water proofing compound as per manufacturers instructions complete all as directed and specified. Note : WPC shall be paid and measured seperately under relavent item |
| 64 | M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:-(a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(b) Laying of 3mm thick prefabricated APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 170 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge. |
| 65 | M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment with preparation of surface complete all as specified and directed. |
| 66 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed laid in trenched or floors complete all as specified and directed. |
| 67 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed laid in trenched or floors complete all as specified and directed. |
| 68 | S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed. |
| 70 | S&F PVC junction single (single T) 110mm dia equal or unequal with access door complete all as specified and directed. |
| 71 | S&F PVC junction single (single T) 75mm dia equal or unequal with access door complete all as specified and directed. |
| 72 | S&F 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 73 | S&F 75mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 74 | M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed. |
| 75 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed. |
| 76 | M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down existing concrete complete all as specified and directed. |
| 77 | M&L Salt glazed stoneware drain pipe Grade 'A' 150 mm bore laid in trenches and jointed including taking down existing pipe complete all as specified and directed. |
| 78 | M & L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes and drains etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work , complete all as specified and directed. |
| 79 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping to drainage complete all as specified and directed. |
| 80 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed. |
| 81 | M & L Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 82 | Rounding to edges of stone slabs such as granite and kota stone ,one edge such as steps cooking platform and other similar situations complete all as specified and as directed. |
| 83 | Dismantling of precast concrete paver block/chequered tiles and removing of debries out side of defence land complete all as specified and directed. |
| 84 | M&L for cement concrete in foundation,filling, sub base and mass concrete type B-2, 1:4:8, (using 20mm graded stone aggregate) finished even and rough to receive floor topping complete all as specified and directed. |
| 85 | M& L for 60 mm thick, M-35 grade machine pressed precast interlocking concrete coloured (Red/yellow) paver block over 30 mm thick sand cushioning in any shape and size with grey cement and pigment as approved confirming to IS 15658-2006 complete all as specified and as directed. |
| 86 | M&L for Chequered cement concrete tiles (rubber moulded with gloshy finishing) with grey cemet and pigments 30cm x30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with 15mm thick bedding layer of cement mortar 1:6 complete all as specified and directed. |
| 87 | M&L for Sand filling under floors in foundation including watering and consolidation complete all as specified and directed. |
| 88 | S&F in repair Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per color approved with metal powder coated legs, . Workstation having glass/fabric/white board prating on the top of the table, with three mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm.(single seater) In each workstation. Including 02 Nos Power Socket(5/15 Amps) in each seat required for extension for PC/UPS connectivity with reqd wire complete. Model No ESC/WS/011. Make Royal Koas. |
| 89 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises and removing the debries outside the MOD land complete all as specified and directed. |
| 90 | M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern)/skirting and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as s&d by Engr-In-Charge. |
| 91 | Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc and removing the debries outside the MOD land complete all as specified and as directed. |
| 92 | M&L for rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement complete all as specified and directed. |
| 93 | M&L for preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer incl (1-2) mm thick wall care putty on walls complete all as specified and directed . |
| 94 | M&L for preparation of old plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over 1 mm thick wall care putty on walls complete all as specified and directed. |
| 95 | Taking down of existing old/unserviceable Split AC 1.5 / 2.0 Ton Capacity /Tower AC / Package AC and deposited to MES store yard of GE (AF) Subroto Park complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | Taking down of existing old/unserviceable Split AC 1.5 / 2.0 Ton Capacity /Tower AC / Package AC and deposited to MES store yard of GE (AF) Subroto Park complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender