Tender For Repair/ Maintenance Of Joint Filling, Epoxy Treatment Pqc, Pme, Painting And Connectede Items At Af Stn Bihta
Tender Value
75 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
20 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Joint Filling, Epoxy Treatment Pqc, Pme, Painting And Connectede Items At Af Stn Bihta
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing of existing construction joints including removing filled material in joints of runway by removing the cracking out joints 10 to 15 mm wide and 25 mm deep including removing all loose material and cleaning the joints with brush and removing all loose fine particles with compressed air, application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minute and priming and sealed with using polyurethane based sealing compound with suitable primer as per manufacturer's recommendation, polyurethane sealant conforming with BS-4254 and EN-141875-2003 (for hydrolysis/water resistant) with minimum movement accommodation factor +/- 30% with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the same after sealant is applied complete all as specified and directed. Note : Old unserviceable material so obtained from removing of existing filled up materials shall be disposed off out side MoD land |
| 2 | M&L for preparing of existing construction or dummy joints including removing filled material in joints of runway by removing the cracking out joints 15 to 20 mm wide and 25 mm deep including removing all loose material and cleaning the joints with brush and removing all loose fine particles with compressed air, application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minute and priming and sealed with using polyurethane based sealing compound with suitable primer as per manufacturer's recommendation, polyurethane sealant conforming with BS-4254 and EN-141875-2003 (for hydrolysis/water resistant) with minimum movement accommodation factor +/- 30% with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the same after sealant is applied complete all as specified and directed. Note : Old unserviceable material so obtained from removing of existing filled up materials shall be disposed off out side MoD land. |
| 3 | M&L for preparing of existing expansion joints including removing filled material in joints of runway by removing the cracking out joints 25 to 30 mm wide and 30 mm deep including removing all loose material and cleaning the joints with brush and removing all loose fine particles with compressed air, primed and providing suitable dia polyurethane back up rod or deboing strip and top 13 mm primed and sealed with using polyurethane based sealing compound with suitable primer as per manufacturer's recommendation, polyurethane sealant conforming with BS-5212 & BS-4254 and EN 141875-2003 (for hydrolysis/water resistant) priming the sides with minimum MAF + 30% with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the same after sealant is applied complete all as specified and directed. Note : Old unserviceable material so obtained from removing of existing filled up materials shall be disposed off out side MoD land. |
| 4 | M&L for repair to broken/damage portion of concrete slab or pavement by cutting damaged portion to slab/spoils edges to triangular or rectangular cross section with mechanical cutter and removing all loose and foreign materails and deposting the same to a distance exceeding 150 but not exceeding 250 m and cleaning the surface by compressed air to remove all dust dirt etc and washing with hydrochloric acid and filling with epoxy resin mortar after application of epoxy primer as per manufacture instructions bull nosing the edges complete all as specified and directed Please Enable Macros to View BoQ information |
| 5 | M&L for repair to broken/damage portion of concrete slab or pavement by cutting damaged portion to slab/spoils edges to triangular or rectangular cross section with mechanical cutter and removing all loose and foreign materails and deposting the same to a distance exceeding 150 but not exceeding 250 m and cleaning the surface by compressed air to remove all dust dirt etc and washing with hydrochloric acid and filling with epoxy resin mortar after application of epoxy primer as per manufacture instructions bull nosing the edges complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender