Tender For Repair To Joinery, Flooring, Plastering, Plumbing And Sanitary Fittings Etc In Offrs Md Accn And Welcome Maintenance To Certain Buildings At Dhana Mil Stn
Tender Value
10 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Flooring, Plastering, Plumbing And Sanitary Fittings Etc In Offrs Md Accn And Welcome Maintenance To Certain Buildings At Dhana Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down 15/20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 2 | Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed. |
| 3 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 15 mm dia complete all as specified and as directed. |
| 4 | Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 20mm bore complete all as specified and directed. |
| 5 | Supply & fixing in repair Bib tap 15mm standerd of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed. |
| 6 | Supply & fixing in repair 15mm stop valve/ angle cock standerd of cast copper alloy with crutch or butterfly handlehigh pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 7 | Supply & fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed. |
| 8 | Supply & fixing in repairs Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified. |
| 9 | Supply & fixing in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 10 | Supply & fixing stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) 15 mm bore, screwed down, high pressure, screwed both end for iron pipe or for union complete all as specified and directed. |
| 11 | Supply and fixing in repair vitreous china wash basin white flat back size 550x400mm including fancy type CP pillar taps and CP waste coupling but including brackets as complete all as specified and directed. |
| 12 | Supply and fixing 450mm long PVC connection 15mm size with nuts fixed in repairs, complete all as specified and directed. |
| 13 | Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern ) white including plastic water closet set black closed pattern with flat bottom including plastic WC seat & cover and mild steel chromium plated hinging devices complete all as specified and directed. |
| 14 | Supply and fixing as in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed. |
| 15 | Supply & fixing for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed. |
| 16 | Material & labour for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 17 | Supply & fixing PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and directed. |
| 18 | Supply & fixing PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore. |
| 19 | Supply & fixing PVC (SWR) bends any radius 110mm bore with access door. |
| 20 | Supply & fixing PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door complete all as specified and directed. |
| 21 | Supply & fixing PVC (SWR) bends any radius 75 mm bore with access door. |
| 22 | Supply & fixing PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises. |
| 24 | Material & labour for for 18 to 20mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking plateform complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete all as specified and directed. |
| 25 | Rounding to edges of the stone slabe on edge such as cooking plateform and other similar work. |
| 26 | Material & labour for mechine cut Cudappa stone slab flooring 20-25 mm thickover cement screed base laid and jointed with white cement slurry with pigment including cutting, rubbing and polishing complete all as specified and directed. |
| 27 | Virified Ceramic tiles 10 mm thick (square/ rectangular) light shed polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete all as specified and directed. |
| 28 | Material & labour for vetrified tiles 10mm thick (square or rectangular ) light shed, polished area of each tiles not exceeding 0.36sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or cloloured cement to match including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 29 | Material & labour Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 30 | Material & labour for glazed coloured ceramic, designer/ concept patern tiles 300mmx600mm x7mm thick set and jointed in neat cement slurry in vertical surfaces and jointed in white cement with pigment to match colour over 10mm thick rendring in CM (1:4) including taking down old dado/skirting/wall finishes of any description, complete all as specified and directed. |
| 31 | Taking down chowkats or frame with shutter (without taking off shutter from frame) from the opening of size not exceeding 1.50 Sqm each complete all as specified and directed |
| 32 | Taking down chowket or frame exc 1.50 sqm but n. exc. 4.00 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified. |
| 33 | Taking down wooden shutter of any descripton exc 1 Sqm and not exc 2 Sqm Each complete all as specified and directed. |
| 34 | Supply & fixing 30 mm thick Flush shutters, solid core construction, and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge. |
| 35 | Material & labour for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed (125x60mm) complete all as specified and directed. |
| 36 | Material & labour for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed (125x60mm) complete all as specified and directed. |
| 37 | Material & labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 38 | Material & labour for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 39 | Material & labour for 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed. |
| 40 | Material & labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards , kitchen cabinat etc fixed in repairs all as specified. |
| 41 | Material & labour for Block boards 18/19mm thick, grade 2 quality , interior grade , commercial type fixed with screws to timber frame work as in cupboards fixed in repairs all as specified and directed. |
| 42 | Continuous (piano) hinges 30 mm wide flaps , mild steel bright finish or electrogalvanised as in cup boards, kitchen cabinat , etc complete all as specified and directed. |
| 43 | 40mm dia , Cupboard knobs fixed with nut , screw and washer of mild steel , bright finished all as specified and directed. |
| 44 | Hasp and staple 100 mm safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed |
| 45 | Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates, grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron |
| 46 | Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ) , hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt ( 2 nos) complete all as specified and directed. |
| 47 | Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 48 | Supply & fixing tinted / coulered floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4.8 mm thick complete all as per specified and directed. |
| 49 | Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | Supply & fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | Supply & fixing Butt hinge, medium weight, cold rolled mild steel of 100 mm size complete all as specified and directed. |
| 52 | Supply and fixing 125 mm aluminium alloy handles, cast type anodised all as specified. |
| 53 | Supply and fixing 150mm aluminium anodised barrel tower bolts of extruded section and fixed. |
| 54 | Supply and fixing 75mm aluminium alloy handles, cast type anodised all as specified. |
| 55 | Supply and fixing 100mm aluminium anodised barrel tower bolts of extruded section and fixed. |
| 56 | Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 57 | Supply and fixing Mild Steel Framed work suck as grills, gratings, including MS angle frame etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars all as specifed and directed. |
| 58 | Supply and fixing aluminium anodised grill of aluminium section Over 50 mm Pitch including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws complete all as specified and directed. |
| 59 | Supply & fixing Ball catches/ Magnetic catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed for cup Board shutter etc |
| 60 | Supply & fixing Floor door stopper of brass body and tongue with hard drawn steel spring and Overall length of cover plate 140 mm complete all as specified and directed |
| 61 | Supply & fixing in repairs 15mm bor 3-hole wash hand basin mixer with pop up waste system to mix hot and cold water fixed to iron pipe or PVC connection complete. |
| 62 | Supply & fixing in repair CP Brass Wall mixer 3 in 1 Chromium plated for mixing hot and cold water screwed down for iron pipe and fixed with connections with and including L bend for shower provision complete all as specified and directed. |
| 63 | Supply and Fixing in repair harrison ralls mild steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length. |
| 64 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 65 | Supply and fixing in repairs hand shower ABS body with 1m long easy flex tube in chrom finish & wall hook complete all as specified and directed. |
| 66 | Supply & fixing CP soap dish fancy type of approved quality fixed in repair recessed type. |
| 67 | Supply & fixing sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 68 | Supply & fixing CP in repairs toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.\\" |
| 69 | Preparation of old decorated surfaces of walls including , corners, pillars etc by washing, scraping, rubbing & brooming down and applying one coat of white wash including filling of minor holes/cracks with putty & removing nails etc copmlete all as specified & directed. |
| 70 | All as per item No. (69) here-in- before but one coat of white wash on ceiling surface and -ditto- |
| 71 | All as per item No. (69) here-in- before but one coat of oil bound distemper and -ditto- |
| 72 | All as per item No. (69) here-in- before but two coat of oil bound distemper and -ditto- |
| 73 | Material & labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. |
| 74 | All as per item No. 73 above but one coat of synthetic enamel paint over old steel surfaces and -ditto- |
| 75 | Material & labour for a coat of Birla putty 1 mm thick as per manufacturer's instruction on wall surfaces including complete removal of existing treatement & preparation of old decorated surfaces all as specified and directed by Engr-in-Charge. |
| 76 | Taking down carefully aluminum/copper point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required and keeping serviceable light fittings in safe custody for reuse in the work or credited to contractor all as specified and directed by Engr in Charge. |
| 77 | Taking down existing sub main wiring of any type/size complete from wall and making good the disturbed surface complete. |
| 78 | Material & labour for point wiring with two single core 1.5 Sqmm FRLSH PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor with one single core 1.50 Sqmm FRLSH PVC insulated unsheathed solid copper conductor as earth continuity conductor drawn through in and including PVC casing caping (ISI Marked) of required size (25x12/32x12mm) along with all fitting/ fixtures such as Tee, Bend, Elbow socket, Saddles etc. and making good the disturbed surface and connecting to common earth dolly complete with concealed/open pressed steel terminal box of suitable size / shape duly painted with black for accommodating switches sockets, regulators with brass screws,washers with hylem sheet of 3mm thick in white / smoke gray/ off white colour for One light point/fan controlled by one, one way 5 Amp switch complete.Note:- Colour of cables as Phase-Red, Neutral-Black and Earth-Green. |
| 79 | All as per item No 78 above but one socket outlet 5 Amp controlled by one switch on the same board. |
| 80 | All as per item No 78 above but one multi pin socket 5 Amps, independent board complete |
| 81 | All as per item No 78 here-in-before but point wiring for one 3 pin 15 Amps socket point on independent board with 2.5 Sqmm size FRLSH PVC insulated, unsheathed, multi stranded, copper conductor cables 1100 volt grade and with 2.5 Sqmm FRLSH PVC insulated unsheathed, single core, multistranded copper conductor cable 1100 volt grade as earth wire complete. |
| 82 | All as per item No 78 here-in-before but one call bell point controlled by one bell push button switch complete. |
| 83 | All as per item No 78 here-in-before but one light point controlled by two 5 Amps 2 Way switch on independent board complete. |
| 84 | Supply & fixing, in repairs, sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 25/32mm x 12mm size med grade including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length |
| 85 | All as per item No 84 above but submain with 6 sqmm complete all as specified and directed. |
| 86 | Supply & fixing, in repairs, sub-main wiring with 4 single core, 10 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 25/32mm x 12mm size med grade including drawing 02 run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 10 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length |
| 87 | Supply and fixing modular plate with frame of 12 module complete all as specified and directed by Engr in charge. |
| 88 | Supply and fixing modular plate with frame of 8 module complete all as specified and directed by Engr in charge. |
| 89 | Supply and fixing modular plate with frame of 6 module complete all as specified and directed by Engr in charge. |
| 90 | Supply and fixing modular plate with frame of 4 module complete all as specified and directed by Engr in charge. |
| 91 | Supply and fixing modular plate with frame of 3 module complete all as specified and directed by Engr in charge. |
| 92 | Supply and fixing modular plate with frame of 2 module complete all as specified and directed by Engr in charge. |
| 93 | Supply and fixing modular switch 1 way 10 Amps 1 module complete all as specified and directed by Engr in charge. |
| 94 | Supply and fixing modular fan regulator 2 module stepped type complete all as specified and directed by Engr in charge. |
| 95 | Supply and fixing modular switch 1 way 16 Amps 1 module complete all as specified and directed by Engr in charge. |
| 96 | Supply and fixing modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed by Engr in charge. |
| 97 | Supply and fixing modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed by Engr in charge. |
| 98 | Supply and fixing modular switch bell push 6 Amp 1 Module complete all as specified and directed by Engr in Charge. |
| 99 | Supply and fixing modular switch 2 way 6/10 Amps 1 module complete all as specified and directed by Engr in charge. |
| 100 | Supply and fixing in repair ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed by Engr in charge. |
| 101 | Supply and fixing in lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and directed by Engr in charge. |
| 102 | Supply and fix in repair LED Adora Plus lamp 09 watt 2 star suitable for 240 volt complete all as specified and directed by Engr in Charge. |
| 103 | Supply and fixing in replacment of call multi Music type single phase 230 volt complete all as specified and directed by Engr in Charge. |
| 104 | Supply & fixing in repairs E-Lite LED Pride tube light fitting 20 watt, 6500 K, decorative ultra slim square profile LED lighting fixtures with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and directed Make. HAVELLS Cat Part No LHEXAZP7PN1W020 of equivalent makes in Philips/Wipro as approved by AGE(I). |
| 105 | Supply & fixing in repairs PRIDE PLUS INVERTER BATTEN LED tube light fitting 20 watt, 6500 K, Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours energy efficient complete all as specified and directed Make. HAVELLS Cat Part No LHEXASP71N1W020 of equivalent makes in Philips/Orient/Jaquar as approved by AGE(I). |
| 106 | Supply & fixing in repairs E-Lite LED Pride ultra LED tube light fitting 10 watt, 6500 K, Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and directed Make. HAVELLS Cat Part No LHEXZP7PN1W010 of equivalent makes in Philips/Orient/Jaquar as approved by AGE(I). |
| 107 | Supply & fixing, in repairs, Ellips Neo Hexa Bulkhead designed for modern homes available in non PIR as well as PIR sensor with premium quality LEDs 10 watt 6000K and including providing and connecting with twin core copper conductor twisted cable and testing on completion all as specified and directed. As per Cat No-GUGBYGENXFTS10WLED865SSYMBOPC of make Havells or equivalent make approved by AGE (I) |
| 108 | Supply & fixing MCB DB double door TPN 4 way 415 Volt complete all as specified and directed by Engr in charge. |
| 109 | Supply & fixing MCB DB double door SPN 12 way 240 Volt complete all as specified and directed by Engr in charge. |
| 110 | Supply & fixing MCB TPN 100 Amp, 415 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed by Engr in Charge. |
| 111 | Supply & fixing MCB SPN 63 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed by Engr in Charge. |
| 112 | Supply & fixing MCB SPN 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed by Engr in Charge. |
| 113 | Supply & fixing MCB SP 10 to 32 Amp 230 Volt, `C' Curve, with breaking capacity 10 KA complete all as specified and directed by Engr in Charge. |
| 114 | Taking down existing old unserviceable distribution box/Wall mounted busbar of any size and any type from site complete from wall and making good the disturbed surface complete all as specified and directed by Engr in charge. |
| 115 | Supply & fix wall mounted busbar system with 100 Amps, TPN, busbar made of ETP grade copper , 440 Volt, AC complete all as specified and directed by Engineer-in-Charge. Havells cat Part No IHBC010004 or equivalent of C&S, L&T etc |
| 116 | Material and labour for replacement of 20 Amps MCB Combo with sheet metal enclosure for Air conditioning with 25 Amps MCB SPN complete all as specified and directed by Engr in charge. Make : Havells or equivalent make of Phillips/Bajaj/Anchor etc. |
| 117 | Material & labour for laying, testing and connection of PVC insulated, aluminum service connection wire of size 10 sqmm, 2 core, 1100 volts grade (Heavy duty) ISI marked complete all as specified and directed by Engr in charge. |
| 118 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 11384.00/- ] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender