Tender For Repairs To Rolling Shutters, Aluminium Doors/Windows And Partition Works Inside Drdl C Us,Under Age B/R Drdl Hyderabad.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
13 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Rolling Shutters, Aluminium Doors/Windows And Partition Works Inside Drdl C Us,Under Age B/R Drdl Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down rolling shutter of any size but not exceeding 32 Sqm for repairing and replacing of damaged parts of rolling shutter and welding, oiling, greasing complete and re-fixing in its original position and making good to disturbed surface including one coat of synthetic enamel paint, complete all as directed.Note : Supply only and S&F of damaged spare parts as required shall be measured & paid under relevant items. |
| 2 | S&F in repairs gear wheel for rolling shutter of any size as required, complete all as directed. |
| 3 | S&F in repairs Gear worm for rolling shutters of different sizes as ordered, complete all as directed. |
| 4 | S&F in repairs Gear box for rolling shutter of any size, complete all as directed. |
| 5 | Supply only ball bearing of designation No.6205 of required dia for fixing to mild steel sliding door of any size, complete all as directed. |
| 6 | Suppply only ball bearing suitable for rolling shutters of any size, complete all as directed. |
| 7 | Periodical inspection for checking of various parts, greasing/oiling as required to make the sliding steel door/steel door/rolling shutters gear/hand operated/electrical operated for easy and smooth operation all as specified and details of sizes and pattern of the following sizes:- |
| 8 | (i) Mild steel door of any type, area exceeding 05 Sqm and not exceeding 30 Sqm, complete all as directed. |
| 9 | (ii) Mild steel door of any type area exceeding 30 Sqm and not exceeding 60 Sqm, complete all as directed. |
| 10 | (iii) Collapsible gate of area not exceeding 09 Sqm, complete all as directed. |
| 11 | (iv) Collapsible gate of area exceeding 09 Sqm but not exceeding 18 Sqm, complete all as directed. |
| 12 | (v) Rolling shutter hand operated/gear operated/ electrically operated of area exceeding 04 Sqm but not exceeding 09 Sqm, complete all as directed. |
| 13 | (vi) Rolling shutter hand operated/gear operated/ electrically operated of area exceeding 09 Sqm but not exceeding 15 Sqm, complete all as directed. |
| 14 | (vii) Rolling shutter hand operated/gear operated /electrically operated of area exceeding 15 Sqm but not exceeding 32 Sqm, complete all as directed. |
| 15 | (viii) Rolling shutter hand operated/gear operated/ electrically operated of area exceeding 32 Sqm but not exceeding 65 Sqm, complete all as directed. |
| 16 | S&F in repairs operating handle for rolling shutter, complete all as directed. |
| 17 | Taking down the existing unserviceable locking lever from the rolling shutters and supply and fix new locking arrangement for the rolling shutter of any size and type including welding/ fixing with nuts and bolts etc., complete all as directed. |
| 18 | S&F rolling shutter laths of 1.25mm thickness including taking down damaged shutter laths, complete all as directed. |
| 19 | Supply only MS springs suitable for rolling shutters of any size complete all as directed. |
| 20 | Supply only mild steel rolling shutter shaft 50mm dia as required, class 'C' for rolling shutters of any size, complete all as directed. |
| 21 | Supply only mild steel rolling shutter shaft 65mm dia as required, class 'C' for rolling shutters of any size, complete all as directed. |
| 22 | S&F in repair mild steel plain sheet 1mm thick as in wall cladding, steel gates, covering to door shutters, rolling shutter covers etc and fixed to steel frames including necessary welding as required, complete all as directed. |
| 23 | S&F Steel rolling shutters 1.25 mm lath thickness , without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type |
| 24 | All as per item No.15 as above, but gear operated type with bevel gear box and crank handle. |
| 25 | All as per item No.15 as above, but gear operated type with chain wheel and hand chain. |
| 26 | Making good jambs, cills etc., with cement mortar (1:4) to match with the adjacent surfaces, complete all as directed. |
| 27 | S&F in repairs electric motor of 0.75 HP capacity suitble for rolling shutter of size not exceeding 20sqm, single phase power, automatic stop level thermostat for cooling motor and chain crank of 3- 6mtr length in the absence of power all built in one single unit and shaft pipe of 150mm bore dia, including taking down of existing shutter along with conventional motor and connected to gear box, shaft etc and refixing shutter in same position, complete all as directed. |
| 28 | S&F in repairs electric motor, of 1.5 HP capacity suitble for rolling shutter of size exceeding 20sqm but not exceeding 30 Sqm, single phase power, automatic stop level, thermostat for cooling motor and chain crank of 3 - 6mtr length in the absence of power all built in one single unit and shaft pipe of 150mm bore dia, including taking down of existing shutter along with conventional motor and connected to gear box, shaft etc and refixing shutter in same position, complete all as directed. |
| 29 | M&L for preparation of old painted steel or iron surfaces of rolling shutters any description not otherwise described over 10cm width or girth and applying one coat of aluminium paint, complete all as directed. |
| 30 | M&L preparation of old painted steel surfaces of rolling shutters any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as directed. |
| 31 | S&F framed work such as grills, grating, framed guard bars, with ends of bars shouldered and or riveted or forged into spikes etc., including necessary welding complete conforming to Fe 290 Gde E165, including dismantling of old grills, gratings/ guard bass etc complete all as specified and as directed. |
| 32 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and fixing (exclusive of steel sheeting or covering) confirming to Fe 290 (Gde E165), including dismantling old framed work as in door/ gates etc., complete all as directed. |
| 33 | S&F welded steel wire fabric of weight n.exc 4 kg / Sqm to steel members including necessary welding etc., including taking out the old steel wire fabric complete all as specified and as directed. |
| 34 | S&F in repairs to Collapsible steel gates top hung consisting of channel pickets pivoted flat bars top and bottom runners brass handles etc as specified and erected in position and securing runners with hold fasts and brackets, complete all as specified and as directed. |
| 35 | S&F in repairs, plain steel sheet 0.63mm thick as in steel gates, covering to door shutters, etc and fixed to steel frames including necessary welding as required, complete all as specified and as directed. |
| 36 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as directed. |
| 37 | Hacking out broken glass from aluminium frame and S & F sheet glass, 4.8mm thick, ordinary quality area exc. 0.50 Sqm in each pane fixed with rubber beading, complete all as directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality) from wooden frames and supply and fixing sheet glass 4mm thick, ordinary quality area n exc. 0.50 Sqm in each pane, glazing with putty/ wooden beads, complete all as directed. |
| 39 | Hacking out the old broken glass (any thickness, size) from steel frame glazed with oil putty or fixed with beads and supply and fix pin headed glass of 4mm thick fixed with oil putty and clips in squares not exceeding 0.50 Sqm in each, complete all as directed. |
| 40 | All as per srl item No.31 here-in-before but 3.0mm thick. |
| 41 | S&F Solar control film 25 micron, reflective type of approved shade stuck to glass panes of Aluminium windows, doors etc., complete all as directed. |
| 42 | All as per Sl item No.33 here-in-before but as in repairs including removing existing unserviceable/damaged film and clearing the glass to receive new film, complete all as directed. |
| 43 | S&F in repairs, Mortice lock, brass, 4 levers for aluminuim doors of any description and any position, complete all as directed. |
| 44 | S&F cast iron door top pivots for aluminuim doors of any description and at any position including carefully taking down the damaged pivot, complete all as directed. |
| 45 | Overhauling floor mounted door spring, complete by removing cover plates, floor springs and fixing back after replacing the power rolling greasing etc, complete all as directed. |
| 46 | M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking out the old damaged spring of any description and in any position and making good all disturbed surfaces to match with adjoining surface, complete all as directed. |
| 47 | S&F in repair Aluminium extruded section body hydraulic door closer hydraulically regulated designed No.3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as directed. |
| 48 | Taking down alumimium door shutters with frame or without frame of any description from the opening and re-fixing the same in the same opening after repairs and overhauling the accessories, each leaf n.exc 5.00 Sqm including removing and re-fixing of old glass of any thickness and of any size with new rubber beading, complete all as directed. |
| 49 | Overhauling to aluminium window of area n.exc 1.5Sqm each including tightening/beading greasing the top and bottom hinges, tightening the aluminium grills/loosed screws nut & bolts etc, and ensure smooth functioning, complete all as directed. |
| 50 | All as per Sl item No 42 above, but area exceeding 1.50 Sqm but n. exc. 4.00Sqm, complete all as directed. |
| 51 | S&F in repairs 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as directed. |
| 52 | S&F in repairs mild steel butt hinges of 100mm size medium weight cold rolled, complete all as directed. |
| 53 | S&F in repairs 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as directed. |
| 54 | S&F in repairs 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, complete all as directed. |
| 55 | S&F in repairs 300mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts four on bolt plate and two on staple plate, complete all as directed. |
| 56 | S&F in repairs, brass, sliding door bolt of size 300mm, with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts, complete all as directed. |
| 57 | S&F in repairs, brass barrel tower bolts of 200mm long, with barrel of extruded section, complete all as directed. |
| 58 | S&F in repairs, extruded brass handles, of sie 150mm fabricated type polished classical type complete all as directed. |
| 59 | S&F in repairs, butt hinges of size 100 mm extruded brass with mild steel hinge pin, bright polished complete all as directed. |
| 60 | M&L for Powder coated aluminum frame of any type for doors, windows,ventilators, partitions with one or more rebates including joining cleat etc fixed to frame with aluminium screws complete all as specified. |
| 61 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including taking down old existing aluminium Door/window shutters complete all as specified and as directed. |
| 62 | S&F Anodised aluminium powder coated window shutters side (thickness of powder coating not less than 50 mircon) side hung/sliding, without sash bars aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, neoprene rubber packing, handles- 01No in each shutter, hinges 2 Nos/rollers, snap beading, including taking down old existing aluminium window shutters complete all as specified and as directed. |
| 63 | S&F in repairs, Aluminium anodised or powder coated grill (thickness of powder coating not less than 50 mircon), weight not less than 2.0Kg/ sqm fixed to aluminium windows, complete all as specified and as directed. |
| 64 | S&F Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed by Engineer –In -Charge. |
| 65 | S&F Pre-laminated particle board 12mm thick, interior grade, pre laminated both side decorative ,fixed in panels to aluminum frame including powder coated snap beading complete all as specified and as directed by Engineer –In -Charge. |
| 66 | S&F 4.8mm thick plain glass exc 0.5 sqm in each pane fixed to aluminium door/ windows and iron frame including Aluminium powder coated snap beading and rubber gasket complete all as specified and directed by Engineer – in - Charge. |
| 67 | S & F in repairs Glazing with 10.0 mm thick toughened opaque glass area exc. 0.50 Sqm in each pane fixed with rubber beading for aluminium door, complete all as specified and as directed. |
| 68 | Taking down aluminium partitions and re-fixing including tightening the particle board, glass panels and minor repairs etc., complete all as directed. |
| 69 | S&F in repairs reversible starter including limit switches for motarised rolling shutters of any size complete all as directed. |
| 70 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as directed. |
| 71 | M&L for Brick work with Fly ashbricks, straight or curved on plan exc 6m mean radius in CM (1:6), including demolition of old brick work complete all as directed. |
| 72 | Taking down cement plaster of any description on stone or brick walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as directed. |
| 73 | M&L for 10mm thick rendering in cement mortar (1:6), on brick or concrete surfaces finished even & smooth without using extra cement, including preparation of newly plastered surfaces & applying three coats of white wash complete all as directed. |
| 74 | M&L for preparation of newly plastered surface of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 75 | S & F in repair Aluminium hydrulic door closer hydraulically regulated designed No.3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as directed. |
| 76 | S & F framed work such as grills, grating, framed guard bars, with ends of bars shouldered and or riveted or forged into spikes etc., including necessary welding complete conforming to Fe 290 Gde E165, including dismantling of old grills, gratings/ guard bass etc complete all as specified and as directed. |
| 77 | S & F mild steel works as in stairs/ladders (framed) including stringers, treads, landing balusters, hand rails etc including cleats brackets etc complete, confirming to Fe-410-w (gde-250) quality A, including dismantling of old steel stairs / ladders etc., complete all as directed. |
| 78 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and fixing (exclusive of steel sheeting or covering) confirming to Fe 290 (Gde E165), including dismantling old framed work as in door/ gates etc., complete all as directed. |
| 79 | Taking down vertical type venetian blinds of any description carefully, repairing gear boxes and replacement of damaged bushes, adjustable rope for sliding purpose and re-fixing back after cleaning in position and to ensure smooth functioning of venetian blinds, complete all as directed. |
| 80 | Taking down existing venetian blinds of any type completely with fittings of any type and supply and fix new venetian blinds, (vertical type) of 100mm wide of approved, fabric blinds including all necessary fittings of approved colour to match with the existing, complete all as specified and as directed. |
| 81 | Taking down existing venetian blinds Rolling type completely with fittings of any type and supply and fix new venetian blinds Rolling type of approved, fabric blinds including all necessary fittings of approved colour to match with the existing, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender