Tender For special Repairs To Bldg No. T-21(Bty Loc) At 1832 Lt Regt, Provn Of 01 X Toilet Block For Or Living Area At 4 Ew Bn, Provn Of Baggage Room Near Bldg No T-01 At 2/5 Ci Det Ecib And Addn/Altn To Bldg No T-37 Central Bath Point At 4 Ew Bn Und
Tender Value
42.27 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
18 days left
EMD
84600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bldg No. T-21(Bty Loc) At 1832 Lt Regt, Provn Of 01 X Toilet Block For Or Living Area At 4 Ew Bn, Provn Of Baggage Room Near Bldg No T-01 At 2/5 Ci Det Ecib And Addn/Altn To Bldg No T-37 Central Bath Point At 4 Ew Bn Under Ge(N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : SPL REPAIRS TO BLDG NO. T-21(BTY LOC) AT 1832 LT REGT, PROVN OF 01 X TOILET BLOCK FOR OR LIVING AREA AT 4 EW BN, PROVN OF BAGGAGE ROOM NEAR BLDG NO T-01 AT 2/5 CI DET ECIB AND ADDN/ALTN TO BLDG NO T-37 CENTRAL BATH POINT AT 4 EW BN UNDER GE(N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8294) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with bitumen washer to truss members of any material, including dismantling of old unserviceable AC/CGI sheet in exisitng complete in all respect as specified and directed. |
| 3 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strenght of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws with bitumen washer to truss members of any material,dismantling of old unserviceable AC/CGI sheet in exisitng complete in all respect as specified and directed. (The measurement shall be carried out as in a plain sheet). |
| 4 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet having tensile strenght of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws with bitumen washer over mild steel flats, angles etc. and screws for fixing with framed structure including dismantling of old unserviceable AC/CGI sheet in exisitng complete in all respect as specified and directed. (Note:- MS work shall be measured and paid separately). |
| 5 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, including dismantling of old unserviceable false ceiling works in exisitng complete in all respect as specified and directed. |
| 6 | M & L for asbestos cement building board cover strips, 50mm x 5mm, with bevelled edges over joints including all mitres, etc., and fixed with screws including dismantling of old unserviceable exisitng boarding complete in all respect as specified and directed. |
| 7 | S & F mild steel sections (Beam, tee, angle, channel or flat sections) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using Fe 410-W (Gde E-250) quality A including dismantling of old unserviceable complete in all respect as specified and directed. |
| 8 | S & F plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads using second class wrought HW sec area exc 13 Sqcm but not exc 25 Sqcm including taking down of framed work complete in all respect as specifified and directed. |
| 9 | M&L for PCC (1:2:4) Type B-2 (40mm graded aggregate) as foundation filling and mass concrete for post including demolition of old unserviceable complete in all respect as specified and directed. |
| 10 | M & L for Cement concrete chequered tiles with grey cement and pigment 30cm x 30cm x 20-25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm screed bed in CM 1:6 including dismantling of old unserviceable complete in all respect as specified and directed. |
| 11 | M&L in repair for second class HW scantalling, wrought, in any position for framed work , jointing with necessary nails, nut bolts etc including necessary supports for truss structure including dismantling of old unserviceable complete in all respect as specified and directed. |
| 12 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate as in flooring including dismantling of old unserviceable complete in all respect as specified and directed. |
| 13 | Providing and laying light coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, including dismantling of old unserviceable complete in all respect as specified and directed. |
| 14 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.15 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, including dismantling of old unserviceable complete in all respect as specified and directed. |
| 15 | S&F in repair 20mm dia PVC coated over mild steel tube including bracket, stops, rollers etc. complete all as specified and directed. |
| 16 | M&L for preparation of new undecorated wooden surfaces with pre mixed wood filler used as putty of grith exc 10cm and applying two coats of synthetic enamel paint over one coat of pink primer before painting complete all as specified and directed. |
| 17 | M&L for preparation of old decorated wooden surfaces with pre mixed wood filler used as putty of grith exc 10cm and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 18 | M&L for preparation of new undecorated steel surfaces with pre mixed steel filler used as putty for steel work and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer before painting complete all as specified and directed. |
| 19 | M&L for preparation of old undecorated steel surfaces with pre mixed steel filler used as putty and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 20 | M&L for preparation of new plastered or undecorated surfaces of wall using wall care putty to fill the voids and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 21 | M&L for preparation of old decorated surfaces of wall after complete scrapping down and using wall care putty to fill the voids and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 22 | M&L for preparation of new surface of plastered wall using wall care putty to fill the voids and applying two coats of oil bound distemper and finished another one coat with spunge roller over including one coat of alkali resistant priming paint before distempering complete all as specified and directed. |
| 23 | M&L for preparation of old decorated surfaces including washing, rubbing down and stopping of white wash surfaces of walls (Plastered or un-plastered) including cormices pilasters etc and applying two coats of wall care putty and applying two coats of oil bound distemper and finished another one coat with spunge roller including one coat of alkali resistant priming paint before distempering complete all as specified and directed. |
| 24 | S & F 18-19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including necessary leaping/edge margin and decorative face veneer on both faces complete in all respect as specified and directed. |
| 25 | Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete complete including demolition of old unserviceable pcc work complete in all respect as specified and directed. |
| 26 | S & F powder coated (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type/sliding without sash bars, aluminium sections weighing over 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) including demolition of old unserviceable chowkhat/shutter complete in all respect as specified and directed. |
| 27 | M & L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 28 | S & F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings including demolition of old unserviceable chowkhat/shutter complete in all respect as specified and directed. |
| 29 | S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165 including demolition of old unserviceable chowkhat/shutter complete in all respect as specified and directed. |
| 30 | M & L for anodised aluminium grill for doors, windows, ventilators including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 31 | S&F 30mm thick second class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc,sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 32 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including demolition of old unserviceable chowkhat/shutter complete in all respect as specified and directed by Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 33 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 34 | S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, including demolition of old unserviceable chowkhat/shutter complete in all respect as specified and directed. |
| 35 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel haivng a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the M.S. frame weloded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete in all respcet as specified and directed. |
| 36 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixing with beads in door/window/ventilator/fixed glazing shutters complete all as specified and directed. |
| 37 | S&F 100mm size stainless steel butt hinge(ISI marked) complete all as specified and directed. |
| 38 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 39 | S&F 125 mm size, Aluminium handle cast type anodised complete all as specified and directed. |
| 40 | S&F aluminium anodised sliding door bolts with hasp and staple (boil type) 19mm dia bolt 300 mm long complete all as specified and directed. |
| 41 | M & L 15mm thick plastering on wall in cement mortar (1:4) finished even and smooth without using extra cement on one side of lathing or stone masonary surface other than fair face including taking down of old unserviceable plater work complete in all respect as specified and directed. |
| 42 | M & L 15mm thick plastering on wall in cement mortar (1:6) finished even and smooth without using extra cement on other side of lathing or stone masonary surface other than fair face on other side of lathing including taking down of old unserviceable plater work complete in all respect as specified and directed. |
| 43 | M & L for rendering/plastering 15 mm thick in cement mortar 1:4 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement including taking down of old unserviceable plater work complete in all respect as specified and directed. |
| 44 | M & L for rendering/plastering 15 mm thick in cement mortar 1:6 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement including taking down of old unserviceable plater work complete in all respect as specified and directed. |
| 45 | S & F for 4mm thick sheet glass ordinary quality and glazing with oil putty in square complete in all respect as specified and directed. |
| 46 | M&L for brick work with sub-class \\"B\\" old size bricks of class designation (CD) 75, straight or curved on plan exc 6m mean radius, built in cement mortar (CM) 1:6, including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 47 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 48 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed. |
| 49 | S&F 15 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc. complete in all respect as specified and directed. |
| 50 | S&F 20 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc. complete in all respect as specified and directed. |
| 51 | S&F 4 mm thick of size 600 mm x 450 mm bevelled edge mirror of selected quality decorative type mounted on 6 mm commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete in all respect as specified and directed. |
| 52 | S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed. |
| 53 | S&F PTMT ball valve high pressure 20 mm bore with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, complete in all respect as specified and directed. |
| 54 | S&F in repairs 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete in all respect as specified and directed. |
| 55 | S&F in repairs long body Bib taps of 15 mm bore, fancy type CP finish cast copper alloy with crutch handle, screwed down, screwed for iron pipes, complete in all respect as specified and directed. |
| 56 | S&F in repair for 15 mm bore pipe brass chromium plated (CP) shower rose 125 mm size, fixed to iron pipe, complete all as specified and directed. |
| 57 | S&F Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed. |
| 58 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 59 | Taking down existing damaged EWC alongwith complete PCC and cement concrete from sunken floor and providing new EWC and seat cover and water proofing treatment to sunken floor as per following stages:- (a) 15 mm thick plastering in CM (1:3) with WPC at all around wall and base of sunken floor with proper slope. (b) Applying a coat of 85/25 gde hot bitumen @ 1.2Kg/ Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 50 micron, natural colour with cold cut back adhessive. (c) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (d) Supply & fixing of vitreous china wash down water closet pan (pedestal pattern), white, seat cover and P or S type bend etc complete including providing cement concrete and cement filling (1:5:10) and 25 mm thick PCC 1:2:4 at top surface.. |
| 60 | S&F in repair PVC valveless, syphonic action type, low level dual flush cistern 10 ltr capacity, white, wtih inlet, ball valve, float and handle including brackets & flush pipe of polyethylene for low or high level cistern of required height of high density PVC, 32 mm dia pipe, complete in all respect as specified and directed. |
| 61 | S&F in repair Health faucet ABS SS braided hose 1 mtr with V hook including fixing arrangement, complete in all respect as specified and directed. |
| 62 | S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete in all respect as specified and directed. |
| 63 | S & F in repair 15mm bore concealed long neck , CP finished stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete in all respect as specified and directed. |
| 64 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm, complete in all respect as specified and directed. |
| 65 | S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed. |
| 66 | S&F 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete in all respect as specified and directed. |
| 67 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 68 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 69 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 110 mm bore, complete in all respect as specified and directed. |
| 70 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete in all respect as specified and directed. |
| 71 | S&F PVC (SWR) single (single 'T') equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed. |
| 72 | S&F PVC (SWR) single (single 'T') equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed. |
| 73 | S&F PVC (SWR) bends any radius 110 mm bore, complete in all respect as specified and directed. |
| 74 | S&F PVC (SWR) bends any radius 75 mm bore, complete in all respect as specified and directed. |
| 75 | Supply and fixed unplasticised PVC (SWR) Gully trap 125/110 mm, setting and jointing with solvent cement complete in all respect as specified and directed. Make: Supreme, Prince, Oriplast. |
| 76 | M&L for RCC, type B-1, 1:2:4 (using 20 mm crushed and graded stone aggregate) as in manhole covers/ cover slabs or of similar type slab works, etc. incl necessary formwork and loading/ unloading of the same and fixed in position, complete in all respcet as specified and directed. |
| 77 | M & L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all not exceeding 20cm wide complete in all respcet as specified and directed. |
| 78 | S&F 10 mm dia and over TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed. |
| 79 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil. |
| 80 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed |
| 81 | M & L brick work with sub-class \\"B\\" old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:6) complete in all respect as specified and directed |
| 82 | M & L for half brick work with sub-class \\"B\\" old size bricks of class designation 75, straight or curved on plan built in CM (1:4) complete in all respect as specified and directed |
| 83 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed. |
| 84 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed. |
| 85 | M&L 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete in all respect as specified and directed. |
| 86 | M&L 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished even & smooth without using extra cement including mixing of water proofing compound complete in all respect as specified and directed.(Note: Water proofing compound shall be measured and paid under supply only item) |
| 87 | Supply only integral water proofing compound complete in all respect as specified and directed. Note : Water Proofing compund shall be mixed as per manufacturer's instructions. |
| 88 | S & F upto 10mm dia TMT bar cut to length bent to shape required, including cranking, bending spiarlly for hooping for colums, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips for stirrups, spacers and binders complete in all respect as specified and directed. |
| 89 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts,footings, foundation beams,plinth beams bases for columns, etc complete all as specified and directed. |
| 90 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc complete all as specified and directed. |
| 91 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc complete all as specified and directed. |
| 92 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in chajjas, etc complete in all respect as specifified and directed. |
| 93 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter in rough finished flat surface of concrete complete all as specified and directed. |
| 94 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished flat surface of concrete complete all as specified and directed. |
| 95 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete all as specified and directed. |
| 96 | M & L for preparation of new undecortaed wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint on external surfaces of walls complete in all respect as specified and directed. |
| 97 | Preparaing new un decorated plastered or unplastered surface of wall and apply three coats of white wash complete in all respect as specified and directed. |
| 98 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other bconnecting plates using Fe as per IS 4923, Grade YST 310 complete in all respect as specified and directed |
| 99 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 100 | S&F 20mm dia tubular towel rail 600mm long of cast copper alloy, chromium plated with end brackets complete in all respect as specified and directed. |
| 101 | S &F aluminium anodised sliding door bolts with hasp and staple (bolt type) 12mm dia bolt 300mm long, with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 102 | M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed |
| 103 | M&L for river bed fine sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed. |
| 104 | M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4 fixing of tiles in floor complete all as specified and directed. |
| 105 | M & L for coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour complete in all respect as specified and directed. |
| 106 | M & L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed. |
| 107 | M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection/footpath finished the surface even and smooth without using extra cement. |
| 108 | S & F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 109 | M&L for 4mm thick sheet glass ordinary qualityand glazing with oil putty in squares n.exc0.5 sqm each pane complete all as specified and directed. |
| 110 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. |
| 111 | S&F CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. |
| 112 | S&F Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed. |
| 113 | PVC(SWR) junction single (single 'T') equal or unequal 110mm bore complete all as specified and directed. |
| 114 | S & F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed. |
| 115 | S & F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed. |
| 116 | S & F PVC (SWR) branch piece with access door, single (Single Tee) equal or unequal 75mm bore pipe complete in all respect as specified and directed. |
| 117 | S&F 15mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 118 | S&F 20mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 119 | S&F 20mm dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and directed. |
| 120 | S & F Rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including two tank nipples one at inlet and other at one outlet of 20mm dia complete all as specified and directed. |
| 121 | S & F PTMT ball valve high pressure 20mm bore with epoxy coated aluminium rod & high density plastic ball screwed for iron/CPVC pipe/fittings complete all as specified and directed. |
| 122 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 123 | S&F 4 mm thick of size 600 mm x 450 mm bevelled edge mirror of selected quality decorative type mounted on 6 mm commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete in all respect as specified and directed. |
| 124 | S & F PTMT ball valve high pressure 20mm bore with epoxy coated aluminium rod & high density plastic ball screwed for iron/CPVC pipe/fittings complete all as specified and directed. |
| 125 | S&F 15mm bore dia CP finish , bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange(Make-Jaquar) complete all as specified and directed. |
| 126 | S & F 15mm bore dia CP finish,angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and directed. |
| 127 | S & F vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and directed. |
| 128 | S&F chrome finished toilet paper holder of cast copper alloy complete all as specified and directed. |
| 129 | S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete in all respect as specified and directed. |
| 130 | S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement floor trap complete all as specified and directed. |
| 131 | Providing and laying M-25 design mix (using 20mm nominal size crushed and graded stone aggregate)for reinforced cement concrete Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc.; complete in all respect as specifified and directed. |
| 132 | Providing and laying M-25 design mix (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed. |
| 133 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality \\"A\\") including necessary welding complete complete all as specified and directed. |
| 134 | Providing and laying M-25 design mix (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.; complete in all respect as specifified and directed. |
| 135 | Spreading and levelling to under flooring, in layers n. exc. 25 cm thick and well ramming including watering as required of excavated loose soil, as retreived against respective excavation item complete in all respect as specifified and directed. |
| 136 | Providing and laying 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using type B-0, 1:2:4 concrete (using 12.5mm nominal size crushed and graded stone aggregate) mixed with water proofing compound complete in all respect as specifified and directed. (Water proofing compound shall be measured & paid separately under supply only item) |
| 137 | M&L for 18-20 mm thick machine cut kota stone slab flooring of size not less than 500 x 500 mm over 15 mm thick cement mortar (CM) 1:6 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete in all respect as specified and directed. |
| 138 | M&L for 18-20 mm thick machine cut kota stone slab of size not less than 500 x 500 mm in riser of steps, skirting, dado and pillar over 15 mm thick rendering in cement mortar (CM) 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete in all respect as specified and directed. |
| 139 | M & L 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:4) finished even and smooth without using extra cement complete in all respect as specifified and directed. |
| 140 | S & F powder coated aluminium three tier window frame including necessary joining cleats, of Jindal section No 20832 or equivalent section of appd make of 1.5mm thick complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner) |
| 141 | S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner) |
| 142 | S&F 30mm thick flush shutter, solid core construction, with block board core with decorative face veneers with lipping on both sides complete all as specified and directed. |
| 143 | Providing and laying plinth protection of 75mm thick cement concrete, using type C-1, (1:3:6) (using 20mm nominal size crushed and graded stone aggregate), laid in alternate penals/bays and finished the surafce even and smooth without using extra cement complete in all respect as specifified and directed. |
| 144 | S & F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mm including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller 2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner) |
| 145 | M & L for preparation of new plastered surface of wall and applying two coats of weather coat over two coat of home shield over 3mm thick (in two layers), wall care putty over a coat of primer complete in all respect as specifified and directed. |
| 146 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper finished with spunge roller over a coat of alkali resistant priming paint over 3mm thick (in two layers), wall care putty complete in all respect as specifified and directed. |
| 147 | M&L for preparation of newly undecorated plastered surface of ceiling and applying two coats of oil bound distemper finished with spunge roller over a coat of alkali resistant priming paint over 3mm thick (in two layers), wall care putty complete in all respect as specifified and directed. |
| 148 | Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) or of similar work, etc. including necessary form work complete in all respect as specifified and directed. |
| 149 | M & L for filling with approved earth obtained from out side of MoD land including raising (or lowering) earth, spreading in layers n. exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc. n. exc. 1.5m high from base complete in all respect as specified and directed. |
| 150 | S&F towel rack 600mm long of cast copper alloy, chromium plated with end brackets complete in all respect as specified and directed. |
| 151 | M & L for coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour complete in all respect as specified and directed. |
| 152 | M & L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.72 Sqm, in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed. |
| 153 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. |
| 154 | S&F in Concealed Body for Single Lever Basin Mixer Wall Mounted, But without Exposed Parts complete in all respect as specified and directed. |
| 155 | S & F for 4mm thick frosted/figured sheet glass ordinary quality and glazing with oil putty in square complete in all respect as specified and directed. |
| 156 | S & F for BRASK Brass Tower Bolt Xylo Heavy and rolled or cast bolts 300 mm long, complete in all respect as specified and directed. |
| 157 | S & F for Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11,300 mm long, complete in all respect as specified and directed. |
| 158 | S&F in repair for 15 mm bore pipe brass chromium plated (CP) shower 300 x300 mm size, fixed to iron pipe, complete all as specified and directed.make- Jaquar |
| 159 | S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 160 | S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 161 | S&F corner Sheet glass shelf assembly consisting of 5.5mm thick corner sheet glass shelf with chromium plated brass brackets complete all as specified and directed. |
| 162 | S&F in repair table top wash hand basins (WHB), vitreous china of size 500x400 mm x 150 mm ,Waste coupling 32 mm SS and PVC waste pipe including 15 mm bore dia fancy type CP finish swan neck basin mixer, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed. Make:- Jaquar, Cat Part No. JDS-WHT-25909 (TT WHB), Cat Part No FLR-CHR-5167NB (Swan neck basin mixer) including 20mm granite table top size(1.0 mtr x 0.6 mtr) and cabinet front side views material made by pre laminated 18 mm thick HDHMR board for long life.2 drawers and 1 door space.hardware ss auto closed hinges joints door diamond shape drawers handle,ss drawers channels for smoothly open and close the drawers complete all as specified and directed. |
| 163 | S&F for Rimless Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 385x720x710 mm, S Trap- 300 mm cat part no-ONS-WHT-10853S300UFSM complete in all respect as specified and directed. |
| 164 | S & F Liquid soap container of frosted glass fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete in all respect as specified and directed. |
| 165 | S&F sun control fim,dark shade film, frosted films suitable for widnows, door and paritions n exc 0.5 sq.m in each pane, complete in all respect as specified and directed. |
| 166 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) , complete in all respect as specified and directed. |
| 167 | Providing & laying heavy duty non skid coloured digital printed floor tiles of size 300mmX300mm ,8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed. |
| 168 | M&L for preparation of old decorated plastered surface of wall, by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots by scraping, washing with water as all specified filling cracks/hole with by applying wall care putty and applying one coat of cement base paint white or coloured by roller complete in all respect as specified and directed. |
| 169 | M & L for point wiring in replacement with 1.5 sqmm FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC casing caping (MMS ISI) of size not less than 20 mm on wall/over ceiling,modular metal boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for light / fan/ bell point controlled by one switch.Note:- (i) Cost of PVC casing caping, modular plates,frames, cover plates etc; are deemed to be included in the quoted rate. |
| 170 | All as per item above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 171 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 172 | All as per item above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed. |
| 173 | M & L for point wiring in replacement with 1.5 sqmm FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit (MMS ISI) of size not less than 20 mm on wall/over ceiling,modular metal boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for light / fan/ bell point controlled by one switch.Note:- (i) Cost of PVC conduit, modular plates,frames, cover plates etc and cement mortar after wall chasis to make good disturbed surfaces; are deemed to be included in the quoted rate. |
| 174 | All as per item above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 175 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 176 | S & F in replacement of modular switch 10A,1 module single pole, one way complete all as specified and directed. |
| 177 | S & F in replacement of modular socket outlet 5 pin ,6 Amps,2 module, 240 Volts complete all as specified and directed. |
| 178 | S & F in replacement of modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 179 | S & F in replacement of modular switch 16A,1 module single pole, one way complete all as specified and directed. |
| 180 | S & F in replacement of ceiling rose polycarbonate type three terminals complete all as specified and directed. |
| 181 | S & F in replacement of modular step type electronic fan regulator ,two module 120 watt single pole 240 Volts complete all as specified |
| 182 | Supply & Fix (S&F) in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendent fitting complete all as specified and directed |
| 183 | S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 184 | S & F in replacement new generation energy saving and environmental friendly long life 35 W LED wall street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including necessary brackets (made out of suitable bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls with MS clamp complete all as specified and directed. |
| 185 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4core complete all as specified and directed. |
| 186 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2core complete all as specified and directed. |
| 187 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc, or for shafts, wells, cesspits, man holes, pier holes etc not exc 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed. |
| 188 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 189 | Removing excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 190 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 191 | Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete. |
| 192 | M&L for 40mm dia GI tubing light grade with all necessary fittings laid in trenches fixed to walls/poles/under road/floor etc for cable protection with suitablke clamp, complete all as specified and directed. |
| 193 | Taking down main switches and DBs of any type and make including wooden board/ junction box and making good disturbed surfaces of wall, floor etc. |
| 194 | Supply and fix electric water heater storage type ABS body(as directed by Engineer-In-charge) with glasslined stainless steel inner tank capacity 25 litres, heating element of 2 KW, BEE 5 star rated with all accessories such as safety valve , thermostat , NRV , SS 304 connection pipe , nut bolt with metalic anchor fasterner etc for fixing on wall & testing, complete all as specified and directed. Note: Warranty of 2 year on geyser and 07 year on geyser tank shall be submitted by the contractor. |
| 195 | S&F in replacement single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed . |
| 196 | Supply and fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers. Necessary connection like hole cutting and connecteion to existing wiring deemed to be incld in quoated rate complete all as specified and directed. |
| 197 | S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed. |
| 198 | Supply and draw submain wiring in replacement with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on wall surface PVC casing caping medium grade of 20-25 mm wide, with double locking type including 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed.Note:- Cost of PVC casing caping on walls and making good disturbed wall surfaces matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 199 | S & F sheet metal enclosure double door for MCB DBs SPN 12 way 240 V, complete flush mounted all as specified and as directed. |
| 200 | S & F sheet metal enclosure double door for MCB DBs SPN 4 way 240 V, complete flush mounted all as specified and as directed. |
| 201 | S & F MCB single pole (SP) 6 to 32 Amps, 240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 202 | S & F MCB Single pole & neutral (SPN) 63-100 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 203 | S & F MCB Single pole & neutral (SPN) 32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 204 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender