Tender For Repair Of Fencing/Compound Wall And Building For Mes Pump House & Repair To Sewage Line At Map Ph-I Accn At Happy Valley Under Ge Shillong
Tender Value
46 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Fencing/Compound Wall And Building For Mes Pump House & Repair To Sewage Line At Map Ph-I Accn At Happy Valley Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Pre-cast cement concrete block masonry using cement concrete 1:3: 6 Mix, Type C1 (Using 20mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 including demolition of PCC block masonry and removal of debries from out side of MOD land complete all as specified and as directed. |
| 2 | M&L for rendering 15 mm thick in CM 1:4 in two layers (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 3 | Supply only Integral water proofing compound (Powder) complete all as specified and directed. |
| 4 | Taking down cement plaster including raking out joints, hacking for key and scrubbing down with water etc including removal of rubbish material from site complete all as specified and directed. |
| 5 | M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint (white or tinted) over priming coat on exterior wall complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. M each including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 9 | M & L for PCC 1:3:6 Mix, Type C2 (Using 40mm graded crushed stone aggregate) as in fixing of RCC/PCC post or similar type of works etc complete all as specified and directed. |
| 10 | Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion from concrete, brick work, masonry etc., and making good disturbed surfaces complete all as specified and directed. |
| 11 | S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-500D complete all as specified and directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and dircted. |
| 13 | S&F Flat/angle iron iron fixed to posts to hold the chain link fencing complete all as specified and directed |
| 14 | M & L 10 mm dia round bars as holding bars for chain link fencing fixed at top and bottem, including linking one to another horigontal bar complete all as specified and directed. |
| 15 | S&F MS 10 to 12mm dia screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal or square nut exc 15 cm n.exc 22.5 cm long complete all as specified and directed |
| 16 | Fixing only chain link fencing including, line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire etc. including dismantling fencing wire mesh, any type complete all as specified and directed. |
| 17 | Supply only chain link fencing any size or type complete all as specified and directed. |
| 18 | S&F CONSEC ZAL super razor punch barb tape (SRPBT) helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with folliowing specification (i) dia of coil (unstreched - 600 mm) (ii) no of circlr - 51 turns per coil (iii) weight of each coil with hessain pack 8.5 kg (iv) coverage per coil - 8 RM (v) central core wire made of 2.6 mm dia GI H.T. SS wire as per IS - 4454 galvanised as per IS-2629 (vi) Razor punched strip - Razor punched tape is CONSEC ZAL steel comprising of AL base with zinc zlloy @ 150 gm/m2 conforming to ASTM-729/A-729 M with additional primer treatment of epoxy/polyurethane &final paint top coat of caulified green shade (BS aluminium base ) by hot dipping process complete all as specified and directed. |
| 19 | S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining, fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provisioning of galvanised mild steel wire, staples of steel pins etc all as specified and directed. |
| 20 | M & L to Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 21 | S & F Mild 1.60mm thick steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified |
| 22 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 23 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 24 | M&L for 75mm thick PCC 1:2:4 Mix, type B2 (using 40mm graded crushed stone aggregate) as in hardstanding /path / plinth prottection incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for 25 mm thick PCC 1:2:4 Mix, type B-0 (using 12.5mm graded crushed stone aggregate ) as in levelling course under floor tiling complete all as specified and directed. |
| 26 | M&L for chequered cement concrete tiles with grey cement and pigment (of approved tint) of size 20 cm x 20 cm x 25mm thick over and including 15 mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry complete all as specified and directed. |
| 27 | Dismantling of stone slabs and granite laid, bedded and jointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed. |
| 28 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 29 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness of M-40 Grade without correctin factor for chamfering , made in rubber moulds with 0.5mm thick scratch proof lacquer coating on top surface , with grey cement and pigment complete all as specified and directed. |
| 30 | M&L for PCC 40 mm thick 1:2:4 Mix, type B1 (using 20mm graded crushed stone agg) as in floor and finishing cement conerete surface even and smooth with using extra cement complete all as specified and directed. |
| 31 | S&F glass dividing strip 3mm thick and 38 mm width, inserted in position confirming to design, complete all as specified and directed. |
| 32 | M&L for PCC 1:3:6 Mix, type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including necessary formwork complete all as specified and directed. |
| 33 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 34 | Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 35 | M&L for 450mm bore reinforced cement concrete pipes, class NP2 (ISI Marked) embosing with date of manufacturing , laid and jointed with CM (1:3) including demolition and breaking up existing drain pipes (salt glazed and stone ware , AC or reinforced concrete pipe) including removal of debris to outside of MOD area complete all as specified and directed. |
| 36 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, and ashlar facings,dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed. |
| 37 | M&L for PCC 1:4:8 Mix, type D-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 38 | M&L for Stone Walling of Random rubble, uncoursed , polygonal rubble walling brought up to course built in cement mortar (1:6) complete all as specified and directed. |
| 39 | Returning and filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed. |
| 40 | Removing excavated materials (soil) to a distance n.exc. 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and direted. |
| 41 | M&L for PCC 1:3:6 Mix, type C1 (using 20mm graded crushed stone aggreagtes) including necessary form works as in precast bond stone set in CM (1:6) complete all as specified and as directed. |
| 42 | Extra over Hammer dressing with maximum depression on face from straight edge held against the dressed surface of lime or sand stone n.exc 20mm complete all as specified and directed. |
| 43 | M&L for raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar (1:4) complete all as specified and directed. |
| 44 | M&L for PCC coping 1:2:4 Mix, type B-1 (using 20 mm graded crushed aggregate stone aggregate) complete all as specified and as directed. |
| 45 | Loose filling with aggregates of guage 80 to 150 mm broken stone or boulders behind weep holes complete all as specified and directed. |
| 46 | S & F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe and taking down complete all as specified and directed. |
| 47 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 48 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 49 | M& L for Reinforcement cement concrete (Nominal mix) Slabs supported on walls, beams and columns in floors,Type B1, 1:2:4 (using 20mm graded stone aggregate) roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all specified and as directed. |
| 50 | M&L formwork to soffits of suspended slabs of rough finished flat surfaces of concrete such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 51 | Taking out and removing sludge water/waste materials/foreign materials from septic tank of 50 users and burring the entire sludge under ground in the pit of suitable size and covering the pit with earth or earth mixed rubbish and removing surplus soil to a distance n.exc 50 m including necessary earth work in pit complete all as specified and directed. |
| 52 | Taking out and removing sludge water/waste materials/foreign materials from septic tank of 100 users and burring the entire sludge under ground in the pit of suitable size and covering the pit with earth or earth mixed rubbish and removing surplus soil to a distance n.exc 50 m including necessary earth work in pit complete all as specified and directed. |
| 53 | Taking out and removing sludge water/waste materials/foreign materials from septic tank of 150 users and burring the entire sludge under ground in the pit of suitable size and covering the pit with earth or earth mixed rubbish and removing surplus soil to a distance n.exc 50 m including necessary earth work in pit complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender