Tender For Repair To Steel Furniture Various Types Of Almirah And Tables Etc At A A Banar Under Ge Banar
Tender Value
47 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
13 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Steel Furniture Various Types Of Almirah And Tables Etc At A A Banar Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | The under mentioned repairs to the furniture articles briefely highligheted below are required to be carry out in BSO stores yard area and in the locations of MD / OTM / UNIT LINES / Single ACCN / MESSes etc where the furniture is actually issued to various buildings or in areas where BSO repair ways have been operational in various OTM / MD Accommodations under the area of responsibility of Garrison Engineer BanarAlmirah Large Steel : FD-67 / 1031/ TP |
| 2 | S/S 6 lever locks (Make-Godrej/Hettich/Harrison/mydas/Rina ) as per drg |
| 3 | CP Handle as per sample/as per drg |
| 4 | Legs as per drg |
| 5 | Repairs to door and adjusment removing bends and dents as required as specified including replacement of hinges |
| 6 | Repair/adjustment to existing loose shelf including welding / riviting / clipping as per drg |
| 7 | S&F new Door Shutter (duly painted in matching paint of existing almirah, paint shall be done after a coat of red primer ) made out of 1mm thick MS sheet replacing the old damaged shutter leaf and fixing it properly and making it functional as shown in drg. |
| 8 | S&F new shelf (duly painted in matching paint of existing almirah, paint shall be done after a coat of red primer ) made out of 1mm thick MS sheet replacing the old damaged shelf and fixing it properly and making it functional as shown in drg. |
| 9 | Almirah Medium / Small Steel: FD-1032/FD-104(m) |
| 10 | S/S 6 lever locks (Make-Godrej/Hettich/Harrison/mydas/Rina ) as per drg |
| 11 | CP Handle as per sample/as per drg |
| 12 | Legs as per drg |
| 13 | Repairs to door and adjusment removing bends and dents as required as specified including replacement of hinges |
| 14 | Repair/adjustment to existing loose shelf including welding / riviting / clipping as per drg |
| 15 | S&F new Door Shutter (duly painted in matching paint of existing almirah, paint shall be done after a coat of red primer ) made out of 1mm thick MS sheet replacing the old damaged shutter leaf and fixing it properly and making it functional as shown in drg. |
| 16 | S&F new shelf (duly painted in matching paint of existing almirah, paint shall be done after a coat of red primer ) made out of 1mm thick MS sheet replacing the old damaged shelf and fixing it properly and making it functional as shown in drg. |
| 17 | Table Office Officer Steel :FD-84/1003 |
| 18 | Legs, as per drg |
| 19 | S/S Lock of drawer/shutters(Make-Godrej/Harrison/Ebco/Mydas/Rina) as per drg |
| 20 | Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 21 | M&L for supplying and fixing the complete right box of table office officer |
| 22 | M&L for supplying and fixing the complete left box of table office officer |
| 23 | Stiffeners as per drg |
| 24 | PVC Shoes std quality all as per drg |
| 25 | Top made out of 18 mm thcik MDF board laminated in teak shade, all exposed edges shall be provided 18mm x 4mm teakwood beading all around duly teakshade polished. The beading shall be fixed with wood adhesive and headless nails as reauired. the top shall be fixed properly with workmanship |
| 26 | Table Office Clerk Steel :FD-84/381 FD 1004 |
| 27 | a) Legs, as per drg |
| 28 | b) Lock of drawer(Make- Godrej/Harrison/Ebco/mydas/Lico/Rina) as per drg |
| 29 | M&L for supplying and fixing the complete right box of table |
| 30 | c) Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 31 | d) Stiffeners as per drg |
| 32 | e) PVC Shoes std quality all as per drg |
| 33 | f) Top made out of 18 mm thick MDF board laminated in teak shade , all exposed edges shall be provided 18mm x 4mm teakwood beading all around duly teakshade polished. The beading shall be fixed with wood adhesive and headless nails as reauired. the top shall be fixed properly with workmanship |
| 34 | Table computer: MAP/TP |
| 35 | Complete key board made of 18 mm thick Prelaminated MDF board exterior grade with telescopic channel & 4mm thick teak wood beading complete rest all as per drg & as directed by EIC |
| 36 | Complete mouse board made of 18 mm thick Prelaminated MDF board exterior grade with telescopic channel &4mm thick teak wood beading complete rest all as per drg & as directed by EIC |
| 37 | Complete drawer made of 18 mm thick Prelaminated MDF board exterior grade with telescopic channel &4mm thick teak wood beading complete rest all as per drg & as directed by EIC |
| 38 | Chair School with hard board :FD/E6/MAP/05 |
| 39 | One piece seat back (Make: Blowplast/Supreme or equivalent ) as per drg. |
| 40 | Hand board made out of 18 mm thick MDF board laminated in teak shade, all exposed edges shall be provided 18mm x 4mm teakwood beading all around duly teakshde polished. The beading shall be fixed with wood adhesive and headless nails as reauired. the top shall be fixed properly with workmanship |
| 41 | Hard rubber shoe std quality as per drg |
| 42 | Table 3x2 with and w/o drawer: FD-1008/1007 |
| 43 | Top made out of 18 mm thick MDF board laminated in teak shade, all exposed edges shall be provided 18mm x 4mm teakwood beading all around duly teakshde polished. The beading shall be fixed with wood adhesive and headless nails as reauired. the top shall be fixed properly with workmanship |
| 44 | Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 45 | Rubber shoe std quality as per drg |
| 46 | SS Lock of drawer as per drg (make-Harrison / Ebco / Godrej / Mydas / Rina) |
| 47 | Table 3x3: FD-1009 |
| 48 | Top made out of 18 mm thick MDF board laminated in teak shade , all exposed edges shall be provided 18mm x 4mm teakwood beading all around duly teakshade polished. The beading shall be fixed with wood adhesive and headless nails as reauired. the top shall be fixed properly with workmanship |
| 49 | Leg/side rail/stiffiner as per shape and size |
| 50 | Rubber shoe std quality as per drg |
| 51 | Shoe Rack Steel FD/E6/MAP/02® |
| 52 | Replacement of unserviceable Jali / mash wherever required as per drg |
| 53 | Hard rubber shoes std quality as per drg |
| 54 | Locker Steel: FD-1029/257/SKD-562 |
| 55 | S/S Hasp & Staple , rest as per drg |
| 56 | Repairs to door and adjusment removing bends and dents as required as specified including replacement of hinges |
| 57 | S&F new Door Shutter (duly painted in matching paint of existing locker, paint shall be done after a coat of red primer ) made out of 1mm thick MS sheet replacing the old damaged shutter leaf and fixing it properly and making it functional as shown in drg. |
| 58 | Legs as per drg |
| 59 | CP Conduit pipe as per drg |
| 60 | Shelf as per drg. |
| 61 | Chair Easy Cushioned seat and back |
| 62 | Rear legs as per drg |
| 63 | Front Leg as per drg |
| 64 | Seating/back Frame members front, back,side rail as per drg |
| 65 | Arm rest as per drg |
| 66 | Replacement of us plywood for seat with new one 12mm thick Plywood WR grade and fixing foam cushion with 40 Density in shape and size to the cushion replaced from the damaged seat with tapesrty cloth as approved by EIC/GE |
| 67 | Replacement of us plywood for back with new one 12mm thick Plywood WR grade and fixing foam cushion with 40 Density in shape and size to the cushion replaced from the damaged back with tapesrty cloth as approved by EIC/GE |
| 68 | Charpoy IP folding : FD 388/ 388(R) etc |
| 69 | 08-09 mm thick plywood top BWR grade commercial type as per existing shape and size with shunken nu t / bolts complete rest all as drg and as directed (Make- WROWN / Century / Greenply / Archidply / Duroply/National) |
| 70 | Hard rubber shoe std quality as per drg |
| 71 | Bed Hard Steel: FD/E6/MAP/8(R) etc |
| 72 | 12mm thick plywood top BWR grade(Make-Wrown/Century ply/Greenply /Archidply /DuroplyNational/Kitply ) as per existing shape and size with complete rest all as per drg as directed. |
| 73 | Hard rubber shoe std quality as per drg |
| 74 | S&F 18 mm thick prelaminated MDF board in head rest with PVC paking/gaskit complete rest all as per drg and as directed by EIC |
| 75 | S&F 18 mm thick prelaminated MDF board in foot rest with PVC paking/gaskit complete rest all as per drg and as directed by EIC |
| 76 | Charpoy IP hard top |
| 77 | 12mm thick plywood top BWR grade(Make-Wrown / Century ply /Greenply / Archidply / Duroply/National/Kitply ) as per existing shape and size with complete rest all as per drg as directed. |
| 78 | Hard rubber shoe std quality as per drg |
| 79 | Head rest/foot rest as per drg |
| 80 | Long rail as per drg |
| 81 | Charpoy GI pipe ply top: FD-220 |
| 82 | S&F in repairs after removing old damaged plywood,12 mm thick plywood commercial type BWR grade on top of charpoy (Make-Wrown / Century ply / Greenply/Archid ply/ National/Kitply) as per existing shape and size with shunken nut / bolts complete all as drg and as directed |
| 83 | S& F MS stifnner (long rail to long rail) of size 40x5 mm thick duly painted in one coat apint silver after a coat of red oxide primer complete all as directed by EIC. |
| 84 | S&F in replacement of long rail made out of 32 mm dia Medium grade GI pipe ISI Marked all as specified and shown on drg complete all as specified and directed. |
| 85 | Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but \\"except pipe\\" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item no 5.03 here in before. |
| 86 | Replacement of unservicable legs from charpoy GI pipe 32mm dia but \\"except pipe\\" including cutting threading etc as required and directed . Note : Pipe obtained from ser item No 5.04 above shall be used for this items. |
| 87 | S&F in replacement of GI 3 way elbow 32 mm dia complete all as specified and directed. |
| 88 | S&F in replacement of 32mm check nuts complete all as specified and directed. |
| 89 | Table Bed Side :FD/E6/MAP/ 15 R |
| 90 | S/S handles of drawers as per sample held with BSO office |
| 91 | Small Drawer all as per drg. |
| 92 | large Drawer as per drg. |
| 93 | Back side of table bed side shall be made of 12mm thick prelaminated HDHMR board as per drg. |
| 94 | Chair Verandah |
| 95 | Welding whereever required |
| 96 | Recanning to seat and backs of steel frames of chair Varandha with 6mm wide virgin quality white colour cane plastic in apporved pattern / as shown on drg after removing old damaged / sagged / wornout canning. Rest all as directed |
| 97 | PVC shoes as per sample/as directed |
| 98 | Chair CBA steel with arm/Without arm FD-75/FD-75(M) |
| 99 | S&F new seat frame as per drg |
| 100 | S&F new back frame as per drg |
| 101 | S&F arm rest as per drg |
| 102 | Hard rubber shoe std quality as per drg |
| 103 | provision MS flat iron strip to supprt back and seat of chair |
| 104 | Welding where ever required |
| 105 | S&F 18 mm thick Pre laminated Particle Board with one side teak shade and other side white laminated in repairs to various parts of any type of furniture like top / back / shelfs / bottom / doors / shutter / drawers etc after removing old damaged parts. The repairing includes labour and materils like PPB, wood adhesive, wooden / bamboo pins, screws, headless nails etc. |
| 106 | A) M&L for french polish after removing of existing polish by scrapping and smothening of surface by grinder wherever required or as directed by EIC all as specified and shown on drgs and as directed by Engineer-in-Charge. B) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally including removing of dust, dirts,dents etc applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. |
| 107 | Bed Hard Steel |
| 108 | Charpoy GI pipe ply top: FD-220 |
| 109 | Charpoy IP hard top |
| 110 | Charpoy folding |
| 111 | Chair Verandah |
| 112 | Almirah Med steel |
| 113 | Almirah large steel |
| 114 | Locker steel |
| 115 | Chair CBA steel with and without arm |
| 116 | Chair school |
| 117 | Table office clk steel |
| 118 | Table office officers steel |
| 119 | Table 3x2 with drawer/without drawer |
| 120 | Table 900x900x760mm steel |
| 121 | Rack 3 tier/stationary/Rack MAP/ |
| 122 | Rack 06 tier steel |
| 123 | Rack shoes steel |
| 124 | Table computer |
| 125 | Table bed side (MAP) |
| 126 | Teapoy verandah (MAP) |
| 127 | Chair easy steel Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender