Tender For Repair / Maintenance Of Water Supply Installation, Pump Sets, Starters, Panel Boards, Iron Removal Plants & Cleaning Of Sump/Oht Etc At Shillong Cantt And Filtration Plants Under Ge Shillong
Tender Value
45 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Water Supply Installation, Pump Sets, Starters, Panel Boards, Iron Removal Plants & Cleaning Of Sump/Oht Etc At Shillong Cantt And Filtration Plants Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cleaning of Underground/semi underground sumps of 1 Nos of 1.5 lakhs Gallon capacity through 7\\" stage mechanical tank cleaning process by involving the following six (7) stages of cleaning process complete all as specified and directed for semi underground sump 1.5 Lakh Gallon capacity. (a) Draining out reserved water by opening drain out valve/ dewatering system.(b) Removing all scale, dirt, mud inside the tank by using TERBACK G10 Chemical and Scrubbing the wall of tank all complete.(c) Cleaning inside sufaces of the tank with Fresh water by high speed jet pump all complete.(d) First bacteria screening for sterilisation by using TERBACK G-5 all complete.(e ) Cleaning the floor of the water tank by heavy duty industrial vacuum cleaner all complete.(f) Second bacteria screening for sterilisation by using UV rays all complete.(g) Third bacteria screening for sterlisation by using TERBACK G65.Note : - (1) The entire work should be carried out be TANCLEAN process by any franchises or M/s RAYS CLEANTECH, or any other MES approved firm having equivalent technology.(2) Entire T&P should be arranged by the Contractor at their own. Only electric power & water shall be supplied by MES at the stipulated rate.(3) \\"Date of cleaning\\" shall be written over the outer surface of tank by synthetic enamel paint with lettering not less than 100mm height. Cost of the same is deemed to be included in the quoted unit rate of cleaning of tank. |
| 2 | All as per Item No 01 above complete but for sump of 50000 Gallon capacity . |
| 3 | All as per Item No 01 above complete but for sump of 30000 Gallon capacity. |
| 4 | All as per Item No 01 above complete but for sump of 10000 Gallon capacity |
| 5 | All as per Item No 01 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 50000 Gallon capacity . |
| 6 | All as per Item No 01 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 30000 Gallon capacity . |
| 7 | All as per Item No 01 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 7000-10000 Gallon capacity. |
| 8 | All as per Item No 01 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 3000 to 5000 Gallon capacity. |
| 9 | M&L for cleaning of Underground/semi underground sumps of 1 Nos of 1.5 lakhs Gallon capacity through manual cleaning process by involving the following stages of cleaning process complete all as specified and directed for semi underground sump 1.5 Lakh Gallon capacity. (a) Draining out reserved water by opening drain out valve/ dewatering system.(b) Removing all scale, dirt, mud inside the tank by using bleaching/calcium hypochloride Chemical and Scrubbing the wall of tank all complete.(c) Cleaning inside sufaces of the tank with Fresh water by high speed jet pump all complete.Note : - (1) The entire work should be carried out by contractors own arrangement.(2) Entire T&P should be arranged by the Contractor at their own. Only electric power & water shall be supplied by MES at the stipulated rate.(3) \\"Date of cleaning\\" should be written over the outer surface of tank by synthetic enamel paint with lettering not less than 100mm height. Cost of the same is deemed to be inclusive in the quoted unit rate of cleaning of tank. |
| 10 | All as per Item No 09 above complete but for sump of 50000 Gallon capacity . |
| 11 | All as per Item No 09 above complete but for sump of 30000 Gallon capacity. |
| 12 | All as per Item No 09 above complete but for sump of 10000 Gallon capacity |
| 13 | All as per Item No 09 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 50000 Gallon capacity . |
| 14 | All as per Item No 09 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 30000 Gallon capacity . |
| 15 | All as per Item No 09 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 7000-10000 Gallon capacity. |
| 16 | All as per Item No 09 above complete but for RCC/PS Overhead Reservoir upto 30 ft high staging of 3000 to 5000 Gallon capacity. |
| 17 | S& F Gun metal impeller with nuts, bolt and locking keys suitable for 20 HP Pump including taking down old unserviceable impeller complete all as specified and directed. |
| 18 | S& F Gun metal impeller with nuts, bolt and locking keys suitable for 10/7.5 HP Pump including taking down old unserviceable impeller complete all as specified and directed. |
| 19 | S& F Gun metal impeller with nuts, bolt and locking keys suitable for 40/50 HP Pump including taking down old unserviceable impeller complete all as specified and directed. |
| 20 | S& F Gun metal impeller with nuts, bolt and locking keys suitable for 75/60 HP Pump including taking down old unserviceable impeller complete all as specified and directed. |
| 21 | Supply & Fixing/Replacement of Fully automatic star delta starter in sheet steel enclosure with NHD Contractor & Pneumatic starter 3 phase suitable for 20 HP, 15 KW motor including taking down old unserviceable star delta starter complete all as specified and directed. Make-LT cat part No-SS96254 OR HAVELLS OR BCH or equivalent model from make:- Seimens |
| 22 | Supply and fixing/Replacement of Fully automatic star delta starter in sheet steel enclosure with NHD Contractor & Pneumatic starter 3 phase suitable for 12.5 HP, 9.3 KW motor including taking down old unserviceable star delta starter complete all as specified and directed. Make- HAVELLS cat part No-IHHASDUB OR LT OR BCH or equivalentmodel from make:- Seimens |
| 23 | S&F of VFD PANEL indoor type, floor/ wall mounted 1.6 mm CRCA sheet made with Contractor & VFD, MCCB, meter, push button ,handle,LED indication and all other accessories as applicable & suitable for 40 HP motor including taking down old unserviceable star delta starter complete all as specified and directed. Make: Havells Cat No IHPASDPD* or equivalent in L&T/Seimensens |
| 24 | S&F / Replacement of Fully automatic star delta starter in sheet steel enclosure with Contractor & Pneumatic starter 3 phase suitable for 40 HP/50HP, motor including taking down old unserviceable star delta starter complete all as specified and directed.Make: Havells Cat No IHPASDPD* or equivalent in L&T/Seimensens |
| 25 | S&F / Replacement of Fully Automatic star Delta starter with sheet steel enclosure with contactor & Pneumatic starter 3 phase suitable for 75 HP , 56 KW motor including taking down old unserviceable starter complete all as specified and directed.Make: Havells Cat No IHPASDYF* or equivalent in L&T/Seimensens |
| 26 | Supply only stud bolt with rubber bush for 10 HP capacity pump set complete all as specified and directed. |
| 27 | Supply only stud bolt with rubber bush for 75/60 HP capacity pump set complete all as specified and directed. |
| 28 | Supply only stud bolt with rubber bush for 50 HP capacity pump set complete all as specified and directed. |
| 29 | Supply only stud bolt with rubber bush for 20 HP capacity pump set complete all as specified and directed. |
| 30 | Supply only Rubber coupling for 40 HP capacity pump set complete all as specified and directed. |
| 31 | Supply only MS coupling with key for 75/60HP capacity pump set complete all as specified and directed. |
| 32 | Supply only MS coupling with key for 50 HP capacity pump set complete all as specified and directed. |
| 33 | Supply only MS coupling with key for 20/10/7.5/5 HP capacity pump set complete all as specified and directed. |
| 34 | Supply only Ball bearing for 75/60 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 35 | Supply only Ball Bearing for 50 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 36 | Supply only Ball bearing for 40 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 37 | Supply only Ball bearing for 20 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 38 | Supply only Ball baering for 10 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 39 | Supply only Ball bearing for 7.5HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 40 | Supply only Ball Bearing for 3 to 5 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 41 | Supply only Roller Bearing for 50 to 75 HP motor and Pump complete all as specified and directed.Make:- TATA/ SKF/ NBC. |
| 42 | S&F in repair Motor terminal suitable for 75/60 / 50 / 40 HP Motor including necessary electrical connection complete all as specified and directed. |
| 43 | S&F in repair Motor terminal suitable for 20 / 10/7.5 HP Motor including necessary electrical connection complete all as specified and directed. |
| 44 | S&F in repair Bushing suitable for 75/60/ 50/ 40 HP Motor including necessary electrical connection complete all as specified and directed. |
| 45 | S&F in repair Bushing suitable for 20 / 10 HP Motor including necessary electrical connection complete all as specified and directed. |
| 46 | S&F in repair Bushing suitable for 7.5 / 5 HP Motor including necessary electrical connection complete all as specified and directed. |
| 47 | S&F in repair external & internal bearing housing for 40/20 HP pump complete all as specified and directed. |
| 48 | S&F in repair external & internal bearing housing for 10/7.5 HP pump complete all as specified and directed.Make of Pump 'KSB'. |
| 49 | S&F in repair gland plate including full threaded nut & bolt for pump capacities 40 /50 /75HP complete all as specified and directed. Make of Pump: 'Kirloskar'. |
| 50 | S&F in repair gland plate including full threaded nut & bolt for pump capacities 20 /10 /7.5HP complete all as specified and directed. Make of Pump: 'Kirloskar'. |
| 51 | M&L for preparation of old decorated surfaces of steel and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 52 | S&F in repairs Gland packing of suitable size made of asbestos grip with silicon etc complete all as specified and as directed. |
| 53 | S&F in repairs four pole 415 volts, 16 Amps contactor NHD series for 7.5 to 10 HP motor starter all as specified and directed. Make BCH Cat Part No C00N or equivalent model from Make:- Siemens / Legrand. |
| 54 | S&F in repairs four pole 415 volts, 25 Amps contactor NHD series for 20 HP motor starter all as specified and directed. Make BCH Cat Part No N1N or equivalent model from make:- Siemens / Legrand. |
| 55 | S&F in repairs four pole 415 volts, 125 Amps contactor for 75 HP motor starter complete all as specified and directed. Make Havells Cat Part No IHPAC095600 or equivalent model from make:- L&T / BCH. |
| 56 | S&F in repairs four pole 415 volts, 80 Amps contactor for 50 HP motor starter completeall as specified and directed. Make Havells Cat Part No IHPAA065511 or equivalent model from make:- L&T / BCH. |
| 57 | S&F in repairs thermal over load relay (Auto/manual reset) relay range 01-13 Amps for motor starter all as directed.Make:- BCH Cat Part No MC305ANA3E-MC305ANA3K or equivalent imodel from make:- L&T / Legrand. |
| 58 | S&F in repairs thermal over load relay (Auto/manual reset) relay range 22-30 Amps for motor starter complete all as specified and directed.Make:- BCH Cat Part No MC305ANA3P or equivalent model from make:- L&T / Legrand. |
| 59 | S&F in repairs thermal over load relay (Auto/manual reset) relay range 48-70 Amps for motor starter complete all as specified and directed.Make:- Havells Cat Part No HNR33AW-HNR33AX or equivalent model from make:- L&T / Legrand. |
| 60 | S&F Single phase preventor electronic type with tripping system against single phase & Phase reversal suitable for protection of electric motor 3 phase 415 volt AC 50 Hz including taking down old unserviceable one complete all as specified and directed. Make L&T Cat No XM81809OOOO or equivalent model from Make:-Schneider/Legrand |
| 61 | S&F MCCB, 3 pole, 415 Volts,160 Amps, 36 kA breaking capacity with thermal and magnetic release including taking down old unserviceable one complete all as specified and directed. Make :- 'L&T' Cat part No. CM92008OOM1OG or equivalent model from make:- Legrand / Schneider |
| 62 | S&F MCCB, 3 pole, 415 Volts,125 Amps, 16 kA breaking capacity with thermal and magnetic release including taking down old unserviceable one complete all as specified and directed. Make :- 'L&T' Cat part No. CM90676OOLO or equivalent model from make:- Legrand / Schneider |
| 63 | S&F MCCB, 3 pole, 415 Volts,200 Amps, 36 kA breaking capacity with thermal and magnetic release including taking down old unserviceable one complete all as specified and directed. Make :- 'L&T' Cat part No. CM90676OOLO or equivalent model from make:- Legrand / Schneider |
| 64 | Supply and fixing copper cable 25 sqmm ,single core multistranded , heavy duty ,1100 volts grade complete inclusive all incoming and outgoing electric connection with copper lugs & taking out old one complete all as specified and directed. |
| 65 | Supply and fixing copper cable 16 sqmm ,single core multistranded , heavy duty ,1100 volts grade complete inclusive all incoming and outgoing electric connection with copper lugs & taking out old one complete all as specified and directed. |
| 66 | M&L water Cholorine testing chemical complete all as specified and directed including taking down old unserviceable PS plate complete all as specified and directed. |
| 67 | M&L chlorine testing KIT with standrd sample box complete all as specified and directed including taking down old unserviceable PS plate. |
| 68 | M&L for testing water sample collected from various location of shillong cantt / MH pump house / Pine walk Pump house/ Labassi Pump house/ 119 TA Pump House and B Camp pump house ( biological, physical and Chemical Test ) as per IS- 10500-2012 tested with Govt Approved lab completed all as specified and directed. |
| 69 | M&L for Taking down the defective induction motor of capacity 75/60 HP by dismantling the electrical connections, removing the motor from bed by decoupling with pump transporting to workshop, dismantling it completely, removing the burnt out winding, rewinding the same with super enameled copper wire of existing gauge replacement of unserviceable part and with necessary insulating material, varnishing, backing and re assembling the motor completely with all connections complete all as specified and directed :-Note : (i) Burnt out removed winding wire shall be property of contractor through schedule of credit and cost of same shall deemed to be included in the rate quoted.(ii) Unserviceable spare parts such as nuts, bolts and washer shall shall deemed to be included in the rate quoted. Bearing shall be measured and paid spearately as \\"Supply' only items and labour element involves for replacement of same shall deemed to be included in the unit rate quoted against these item.(iii) Work shall be carried out by authorised agent of manufacturer of motor. |
| 70 | All as per Item No. 69 above but 50 HP capacity induction motor. Make:- KIRLOSKAR |
| 71 | All as per Item No. 69 above but 40 HP capacity induction motor. Make:- KIRLOSKAR |
| 72 | All as per Item No. 69 above but 20/10 HP capacity induction motor. Make:- KIRLOSKAR |
| 73 | All as per Item No. 69 above but 7.5/5 HP capacity induction motor. Make:- KIRLOSKAR |
| 74 | All as per Item No. 69 above but 1/3 HP capacity induction motor. Make:- KIRLOSKAR |
| 75 | Material and labour for painting of submersible pump set of size 2 HP to 10 HP with two coat of synthetic enamelled paint over coat of red oxide primer comete all as specified and directed. |
| 76 | Material and labour for painting of submersible pump set of size 20 HP to 75 HP with two coat of synthetic enamelled paint over coat of red oxide primer comete all as specified and directed. |
| 77 | Suplying, fabricating & fixing structural mild steel channel, angle, iron, flat iron, sheets and brackets etc for fabrications of valve chamber cover, chasis for pump, PS tank plates, PS tank covers, clamps and back plates including nuts, bolts and washers, welding banding cold , or hot drilling holes for insulators bolts in any shape or size as indicated or directed and inclusive of one red oxide primer coat ,one under coat and one finishing coat of aluminium paint complete all as specified and directed. |
| 78 | Supply and fix CI Sluice valve with flanged ends as per IS-14846 PN-1.6 including stainless steel spindle and wheel , ISI marked with nut bolts and jointing material i.e. rubber gasket complete including taking down old unserviceable sluice valve complete all as specified and directed of 100 mm bore |
| 79 | Supply and fix CI Sluice valve with flanged ends as per IS-14846 PN-1.6 including stainless steel spindle and wheel , ISI marked with nut bolts and jointing material i.e. rubber gasket complete including taking down old unserviceable sluice valve complete all as specified and directed of 150 mm bore |
| 80 | Supply and fix CI Sluice valve with flanged ends as per IS-14846 PN-1.6 including stainless steel spindle and wheel , ISI marked with nut bolts and jointing material i.e. rubber gasket complete including taking down old unserviceable sluice valve complete all as specified and directed of 80 mm bore |
| 81 | Taking out sluice valve , foot valve , refacing , regrinding , rubber gas ket changes, nut, stem plate , nuts & bolts and refixing the same in serviceable condition with flange joints including nut, bolt and double washers of following sizes complete all as specified and directed 150 mm bore |
| 82 | Taking out sluice valve , foot valve , refacing , regrinding , rubber gas ket changes, nut, stem plate , nuts & bolts and refixing the same in serviceable condition with flange joints including nut, bolt and double washers of following sizes complete all as specified and directed 100 mm Bore |
| 83 | Taking out sluice valve , foot valve , refacing , regrinding , rubber gas ket changes, nut, stem plate , nuts & bolts and refixing the same in serviceable condition with flange joints including nut, bolt and double washers of following sizes complete all as specified and directed 80 mm Bore |
| 84 | S& F CI non return valve, 100 mm bore dia with by pass arrangement working pressure 10 kg/Cm2 confirming to IS 5312 including jointing by means of rubber gasket 3 mm thick MS nuts bolts & washers etc including taking down old unserviceable non return valve complete all as specified and directed.Make:- Zoloto / Kirlosker / Upadhaya. |
| 85 | S&F CI foot valve conforming to IS-4038 of pipe size 150 mm dia including taking out old unserviceable foot valve from the sump complete all as specified and directed. Make:- Zoloto / Kirlosker / Upadhaya. |
| 86 | S&F CI foot valve conforming to IS-4038 of pipe size 100 mm dia including taking out old unserviceable foot valve from the sump complete all as specified and directed .Make:- Zoloto / Kirlosker / Upadhaya. |
| 87 | S&F CI foot valve conforming to IS-4038 of pipe size 80 mm dia including taking out old unserviceable foot valve from the sump complete all as specified and directed. Make:- Zoloto / Kirlosker / Upadhaya. |
| 88 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve complete all as specified and directed 50 mm bore of pipe |
| 89 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve complete all as specified and directed 40 mm bore of pipe |
| 90 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve complete all as specified and directed 25 mm bore of pipe |
| 91 | S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve complete all as specified and directed 20 mm bore of pipe |
| 92 | Labour only for cutting of CI / DI/ GI/ MS Pipe inposition for reducing to required length for insertion of new tees, Branches, Buterfly valve ( Wafer Type ) etc of upto 150 mm bore cmpleted all as specified and directed. |
| 93 | Material and labour for PCC 1:3:6 Mix, Type C-2 ( using 40 mm graded crushed stone aggregate) as in foundation of brick pillar to support the pipe line including demplation of old PCC and and removing the debris from site complete all as specified and directed. |
| 94 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 M mean radius built in CM (1:4) as in brick pillar of required size and shape to support the pipe line including demolition of old brick work and removing from site complete all as specified and dairected. |
| 95 | Material and labour for rendering 10 mm thick with cement mortar (1:6) on fair faces of brick work concrete surfaces, finished the surface even and fair complete all as specified and directed. |
| 96 | Meterial and labour for construction of brick masonary valve pit of size 120cmx120cmx100cm (internal dimension) with one brick thick wall in cement mortar (1:4) on 100mm thick PCC 1:3:6 type C-2 as in foundation, rendering 15mm thick (internally/ externally) in cement mortar (1:4), external plaster shall be upto 15cm below GL, MS plate cover 3.15mm thick double door type with angle iron frame of size 40x40x5mm fixed on top of valve pit by means of MS flat iron hold fast 150mm long and size 40x5mm embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) complete including continuous hinges on each side, locking arrangements and handle including necessary excavation in any type of soil, returning filling in and removal of surplus soil to distance not exc 50 mtr and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed. |
| 97 | M & L for welding of pipe to stop leakage from pipe complete all as specified and directed. |
| 98 | M & L for painting to external surfaces of CI/GI pipes, valves, pit covers, pumps, with two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer after preparation of surfaces complete all as specified and directed. |
| 99 | M& L for PCC 1:3:6 Mix, type C2 (using 40 mm graded crushed stone aggregate) for making good disturbed surfaces of channels/pavements/foot paths/roads/foundation etc complete all as specified and directed. |
| 100 | Supply of Calcium based high strength chlorination chemical of water disinfectant in granular form and corrosion inhibitor & Anti scaling agent to prevent the distribution pipe lines & accessories in factory sealed HDPE container (45 Kgs each) ad having Chlorine concentration level 55% to 70% and delivered at Store yard of GE Shillong. Make as approved by the GE.Note :- (i) Necessary manufacturer's test certificate alongwith batch number shall be produced. (ii) OEM's claim regarding corrosion inhibitors and anti scaling agent content must be ratified by E-in-C's branch (copy of E-in-Cs Branch letter must be submitted to ensure quality) |
| 101 | Supply and laying of Reinforced concrete pipes, class NP-2, laid and jointed complete with collars of minimum nominal dia of 150 mm, complete all as specified & directed. |
| 102 | Material and labour for earthing complete with copper plate electrodes of size 600mm x 600mm x 3.15mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to copper strip of 20 mm x 6 mm earth lead by means of nuts, bolts, check nuts, washers etc., earth wire protected by galvanized iron pipe 32 mm bore (light grade) including concrete pit in PCC (1:3:6) type C1, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point, GI funnel with wire mesh fixed on water pipe and PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as specified in electrical plate No. 3 of SSR Part I and testing on completion complete all as specified and directed. |
| 103 | Material and labour in repair for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust and salt in alternate layer all around the plate and bentonite powder, using GI strip 32x6 mm as earth lead electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as specified in electrical plate No. 3 of SSR Part I and testing on completion complete all as specified and directed. |
| 104 | S&F of garden light/ LED Bollard LED lights fitting of capacity 10 W die-cast aluminium body, 10 watt LED toughened glass complete with all accessories incl taking out old unserviceable one complete all as specified and directed. |
| 105 | S&F in repair GI Brackets made out of 40 mm dia light grade pipe of 1.2 mtr long bent to shape including all fittings and connection with existing wire etc complete all as specified and directed. |
| 106 | S&F of LED street light fitting 70 /72 Watts, 230 V, AC, outdoor type with Efficacy > 100 LPW, 10 KV SPD, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including GI bracket of dia 40 mm complete all as specified and directed. |
| 107 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of cable/ erection of pole and getting out in soft/loose soil complete all as specified and directed. |
| 108 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and directed. |
| 109 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 110 | Supply & laying of sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness all complete as specified and directed. Note :- Only punned down sand shall be measured. |
| 111 | M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed. |
| 112 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core Iincluding laying in trench or fixed on wall with clamps complete all as specified and directed. |
| 113 | All as per item No 115.00 but of size 50 Sqmm 3.5 core. |
| 114 | All as per item No 115.00 but of size 70 Sqmm 3.5 core |
| 115 | All as per item No 115.00 but of size 95 Sqmm 3.5 core |
| 116 | S & F Booster pump pressure sensor complete all specified and directed. |
| 117 | Taking up or down the defective booster pump of any make of capacity 0.5/1 HP by dismantling the electrical and pipe connections, transporting to workshop , dismantling it completely ,removing the burnout winding, rewinding the same and change NRV and other necessssary work to make it fully functional fixing the same at origional location complete all specified and directed. NOTE: Burnt out winding wire shall be property of contractor and amount for the same shall be recovered under schedule of credit. |
| 118 | S & F Cable Tray Support Brackets of MS flat of size not less than 12x3mm with horizontal and vertical section (total length not less than 0.3m), vertical section to be fixed on wall through screw/nut-bolt arrangement and horizontal section for holding cable tray through fastner incl drilling, welding, nut-bolts, etc complete all as specified and directed. |
| 119 | S & F perforated hot dip standard type C Cable Tray of thickness min 1.2 mm with cover of size 200 mm width and 50mm height etc complete all as specified and directed. |
| 120 | S & F of perforated hot dip horizontal elbow, bend, straight reducer, inside riser Cable Tray of thickness min 1.2 mm with cover of size upto 200 mm width and 50 mm height as required at site etc complete all as specified and directed. |
| 121 | M&L for glow sign board of size 20' x 4' x 1' including writing upto 30 words as directed in capital letters with No of LED fittings as per direction , cutting and pasting ACP sheet blue colour as per letters and polycarbonate solid sheet of 1.5 mm thickness, PGI sheet of 0.8 mm thick and aluminium angles as per the size of the board, clamping, angle iron , welding and fabrication for fixing over the main entry of pump house etc., complete including taking down the old unserviceable glow sign board complete all as specified and directed. |
| 122 | M&L for glow sign board of size 15' x 4' x 1' including writing upto 30 words as directed in capital letters with No of LED fittings as per direction , cutting and pasting ACP sheet blue colour as per letters and polycarbonate solid sheet of 1.5 mm thickness, PGI sheet of 0.8 mm thick and aluminium angles as per the size of the board, clamping, angle iron , welding and fabrication for fixing over the main entry of power house etc., complete including taking down the old unserviceable glow sign board complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender