Tender For Maintenance And Repair To Manhole Chamber And Septic Tank, Cleaning Of Sewage Line, Soakage Well At Sumdo In The Area Of Age B/R-Iii Sumdo Under Ge 863 Ews.
Tender Value
11 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
22000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lahul and Spiti → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair To Manhole Chamber And Septic Tank, Cleaning Of Sewage Line, Soakage Well At Sumdo In The Area Of Age B/R-Iii Sumdo Under Ge 863 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land. |
| 2 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land. |
| 3 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including the pipe inserted in Man holes walls etc. for undermentioned drain pipes, including removal of rubbish outside MD land :- |
| 4 | 150mm dia |
| 5 | 200mm dia |
| 6 | 300mm dia |
| 7 | M&L for providing cement concrete 1:3:6 type C-2 bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for :- |
| 8 | 150mm bore of pipe |
| 9 | 200mm bore of pipe |
| 10 | 300mm bore of pipe |
| 11 | M&L for laying SGSW pipe of 150 mm internal dia pipes of grade 'A' laid in trenches and jointed all as specified and directed |
| 12 | M&L reinforced concrete pipes, 200mm bore, class NP-2 laid and jointed complete with collars all as specified and directed |
| 13 | All as per item above but 300mm bore pipes |
| 14 | M&L for pumping and bailing out sludge and alike components from septic tanks, soakage pit and alike and removing the same to out side MD land. |
| 15 | Desilting / desludging /cleaning of man holes of any size n.exc 1.5 m in depth and removing all blockage from manholes such as plastic pieces, soil etc complete |
| 16 | All as per item above but exc 1.5 m & n. exc 3.00m in depth. |
| 17 | Cleaning of drain pipes 100mm to 200 mm bore by rodding from manhole to manhole to septic tank or vice vers and well flushing with water after cleaning and removing waste material to a distance n.exc 50m and burying in pits and refilling the same complete all as spfd and directed by Engg-in charge .NOTE: The cost for excavation and earth work for pits is deemed to be included in the unit rate |
| 18 | Cleaning of cast iron pipes 100mm/75mm bore pipes by roddimg with jute bags and well flushing after cleaning complete all as spfd and directed |
| 19 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and n exc 1.50m in depth and getting out in soft/loose soil. |
| 20 | All as per item above but in hard/dense soil. |
| 21 | All as per item above but exc 1.5 mtr deep and n.exc 3 mtr deep in hard/dense soil. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil |
| 23 | Removal of excavated material (soils) to a distance n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point. |
| 24 | M&L for reinforced cement concrete type B1, 1:2:4 using 20mm graded aggregate as in slabs supported on columns and beams.Note : Reinforcement shall be measured and paid separately. |
| 25 | M&L for formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) of rough finished concrete surfaces. |
| 26 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished concrete surfaces. |
| 27 | M&L for providing precast reinforced cement concrete type B1, 1:2:4 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork and demolition / taking up of existing cover slabs & removing rubbish outside MD land.Note : S&F reinforcement shall be measured and paid separately. |
| 28 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia |
| 29 | S&F TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia |
| 30 | M & L for providing PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 31 | M&L for 25mm thick PCC type B-0 using 40mm graded crushed stone aggregate as in sub base for laying floor finishes. |
| 32 | M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes. |
| 33 | M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.06 and nexc 0.11sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 35 | M & L for glazed ceramic tiles in vertical surface such as skirting, dados and rises to steps etc 350x 250x 7 mm/ 450X 350X 7mm thick over 10mm thick cement morter in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile complete all as specified and directed. |
| 36 | Demolition of precast concrete block walling built in cement morter |
| 37 | M&L for block masonry with precast cement concrete type 1:3:6 (20mm graded aggregate) solid blocks exc 10cm in width and setting in cement mortar 1:6. |
| 38 | M&L for providing cement concrete type C1, 1:3:6 mix (20mm graded aggregate) in copings all as specified and directed including necessary use and waste of form work |
| 39 | M&L for providing cement concrete type B1, 1:2:4 mix (20mm graded aggregate) in benching in manholes all as specified and directed including necessary use and waste of form work . |
| 40 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 41 | M&L for rendering 15mm thick in CM 1:4 mixed with water proofing compound on PCC block masonry surfaces finished even and smooth without using extra cement as specified. (Note : Supply only WPC will be measured and paid separately) |
| 42 | Supply only inetergal water proofing compound |
| 43 | Dismantling of cast iron ,PVC or reinforced concrete pipes 150mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia |
| 44 | Dismantling of cast iron ,PVC or reinforced concrete pipes 150mm/110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia |
| 45 | S&f 150mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to floor |
| 46 | S&f 110mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls |
| 47 | S&f 75mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls |
| 48 | S&f 110mm bore PVC (SWR) pipe bends any radius |
| 49 | S&f 75mm bore PVC (SWR) pipe bends any radius |
| 50 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 51 | S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 52 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 53 | S&F plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinges |
| 54 | S&F viterous China squatting pan or Orissa patter 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate. |
| 55 | S&F sand cast iron 'P' or S trap 100mm bore for ind type w/c |
| 56 | M&L for salt glazed stone ware gully traps, square or round mouthed ,type P of size 150x150mm set and jointed to drain pipes with cement mortar 1:1 including demolition piped complete pipes |
| 57 | S&F 75 mm bore PVC (SWR)) floor traps plian with grating incl jointing with solvent cement. |
| 58 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed. |
| 59 | S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed. |
| 60 | S&F PVC waste pipe 32mm bore with cup and washers for WHB / Urinal complete on new or old locations. |
| 61 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender