Tender For Periodicals Including Smart Periodicals Of Hatiali, Laipuli & Panitola Including Mes Installations Under Ge Dinjan No 2
Tender Value
26.50 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
8 days left
EMD
53000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodicals Including Smart Periodicals Of Hatiali, Laipuli & Panitola Including Mes Installations Under Ge Dinjan No 2
BOQ
| Sl. No. | Item Description |
| 1 | M&L for one coat of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed. |
| 2 | M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed. |
| 3 | M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer and 1 mm putty complete all as specified and directed. |
| 4 | M&L preparation of old decorated surfaces & applying one coat of oil bound distemper on ceiling complete all as specified and directed. |
| 5 | M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd. |
| 6 | M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of white putty and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 7 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying weather proof, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of white putty and applying one coat of interior primer by using Airless spray techonology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 9 | M&L for applying two coat interior 100% anti fungal acrylic smooth emulsion with silicon additives on old plastered surfaces that offer anti alge high performance interior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 10 | M&L for preparing of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified & directed by the Engr-in-Charge. |
| 11 | M&L for preparing of old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by the Engr-in-Charge. |
| 12 | Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete. |
| 13 | M&L repair to corroded conc surface as in chajja and ceiling or similar surface after taking down,cleaning and preparation of surface,and apply Dr fixit Lates 302 as per mfg inst up to 50 mm thick and then apply plaster in CM 1:4 15 mm thick complete all as specified and directed |
| 14 | M&L applying one coat of smart care damp gard block 2K of make:-Asian paints/Dr Fixit or equivalent as approved bt GE on brick/conc/plasterd surface as per mfg inst |
| 15 | M&L for Rendering 15 mm thick in Cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of wall upto 3 story height mixed with water proofing compound (ISI Marked) @3% by weight of cement or as per manufacture insturctions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard /block 2K of make : - Asian paints/ Dr Fixit or equivalent as approved by GE. |
| 16 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement incl WPC 3% by weight of cement or as per manufacture instruction complete all as specified and directed |
| 17 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (with out using extra cement) |
| 18 | M&L 5 mm thick plastering on ceiling in CM (1:4) even and smooth without using extra cement after applying of a coat of pidicrete mixed with cement. Note : - Dubbing of cement plater where reqd in two or three layer of 20 mm thick will be includued in the cost. |
| 19 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 20 | M& L for two coat of oil bound distemper over one coat of primer incl preparation of new surface of wall complete all as specified and as directed. |
| 21 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 22 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coat of white putty and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 23 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 24 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 25 | S&F PVC (SWR) single (single 'T') equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed. |
| 26 | S&F PVC (SWR) single (single 'T') equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed. |
| 27 | M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work including all quoins, arches, pillars etc complete. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from steel frames. |
| 29 | M & L sheet glass ordinary quality 4mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender