Tender For Repair/Replacement Of Old Vintage Ci/Gi Pipe Fine Including All Fittings/ Fixtures, Air Valves, Sluice Valve, Foot Valves And Other Connected Items In Perimeter Area Under Ge Pulgaon.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
16 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Old Vintage Ci/Gi Pipe Fine Including All Fittings/ Fixtures, Air Valves, Sluice Valve, Foot Valves And Other Connected Items In Perimeter Area Under Ge Pulgaon.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches by mechnical means (hydraulic excavator) not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all kind of soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming in layers of soil not exceeding 25cm. |
| 3 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of rock. |
| 4 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store or staking at site of size 20mm dia. |
| 5 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store or staking at site of size 25mm dia. |
| 6 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store or staking at site of size 40mm dia. |
| 7 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store or staking at site of size 50mm dia. |
| 8 | Refixing/laying old steel tubing and connections in new or old positons (wall/ ceiling, floor, intrenches etc) threading, rethreading and with necessary fittings all as directed of size 20mm dia. |
| 9 | Refixing/laying old steel tubing and connections in new or old positons (wall/ ceiling, floor, intrenches etc) threading, rethreading and with necessary fittings all as directed of size 25mm dia. |
| 10 | Refixing/laying old steel tubing and connections in new or old positons (wall/ ceiling, floor, intrenches etc) threading, rethreading and with necessary fittings all as directed of size 40mm dia. |
| 11 | Refixing/laying old steel tubing and connections in new or old positons (wall/ ceiling, floor, intrenches etc) threading, rethreading and with necessary fittings all as directed of size 50mm dia. |
| 12 | Supply and fixing/laying in trenches steel tube medium grade with all fitting and fixed complete to wall, tubing and ceilings or laid in floor/ trench of size 20mm dia. |
| 13 | Supply and fixing/laying in trenches steel tube medium grade with all fitting and fixed complete to wall, tubing and ceilings or laid in floor/ trench of size 25mm dia. |
| 14 | Supply and fixing/laying in trenches steel tube medium grade with all fitting and fixed complete to wall, tubing and ceilings or laid in floor/ trench of size 40mm dia. |
| 15 | Supply and fixing/laying in trenches steel tube medium grade with all fitting and fixed complete to wall, tubing and ceilings or laid in floor/ trench of size 50mm dia. |
| 16 | Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of size 20mm bore. |
| 17 | Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of size 25mm bore. |
| 18 | Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of size 40mm bore. |
| 19 | Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of size 50mm bore. |
| 20 | M&L for CI/DI special/fittings suitable for CI/DI flanged/socket ends pipe upto 80 to 150 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers, mechanical joint, etc. complete all as specified and as directed, |
| 21 | M&L for CI/DI special/fittings suitable for CI/DI flanged/socket ends pipe upto 200 to 300 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers etc. complete all as specified and as directed. |
| 22 | Taking up old U/S steel hume pipe line/CI/GI/DI any type water mains pipes, any class,(including all fittings),disconnecting pipes and fittings complete of size 80mm bore |
| 23 | Taking up old U/S steel hume pipe line/CI/GI/DI any type water mains pipes, any class,(including all fittings),disconnecting pipes and fittings complete of size 100mm bore |
| 24 | Taking up old U/S steel hume pipe line/CI/GI/DI any type water mains pipes, any class,(including all fittings),disconnecting pipes and fittings complete of size 150mm bore |
| 25 | Taking up old U/S steel hume pipe line/CI/GI/DI any type water mains pipes, any class,(including all fittings),disconnecting pipes and fittings complete of size 200mm bore |
| 26 | Relaying only old pipe DI/CI/GI in good condition/pipe taken out from trenches for repairs in any length including fittings etc. of size 80mm bore |
| 27 | Relaying only old pipe DI/CI/GI in good condition/pipe taken out from trenches for repairs in any length including fittings etc. of size 100mm bore |
| 28 | Relaying only old pipe DI/CI/GI in good condition/pipe taken out from trenches for repairs in any length including fittings etc. of size 150mm bore |
| 29 | Relaying only old pipe DI/CI/GI in good condition/pipe taken out from trenches for repairs in any length including fittings etc. of size 200mm bore |
| 30 | Supply and fix cast iron pipes with spigot and socket ends centrifugally casted class LA in any length suitable for rubber tytan joint and Laid in trenches of size 150mm bore. |
| 31 | Supply and fix cast iron pipes with spigot and socket ends centrifugally casted class LA in any length suitable for rubber tytan joint and Laid in trenches of size 200mm bore. |
| 32 | Supply and laying in trenches/surfaces 200mm bore Ductile iron spigot and socket pipes as per IS:8329/2000 class K9 including EPDM rubber gasket suitable for and including push on rubber gasket joint with inside cement mortar lining and outside zinc bitumen coating complete all as specified and as directed. |
| 33 | Supply and laying in trenches/surfaces 100mm bore Ductile iron spigot and socket pipes as per IS:8329/2000 class K9 including EPDM rubber gasket suitable for and including push on rubber gasket joint with inside cement mortar lining and outside zinc bitumen coating complete all as specified and as directed. |
| 34 | Supply and laying in trenches/surfaces 80mm bore Ductile iron spigot and socket pipes as per IS:8329/2000 class K9 including EPDM rubber gasket suitable for and including push on rubber gasket joint with inside cement mortar lining and outside zinc bitumen coating complete all as specified and as directed. |
| 35 | M&L for burning out lead joint in position , including removing lead to store / stacked at site to issue under credit and new Run lead joint for spigot socket cast iron pipes and fitting, including cauking properly and making joint leak proof of size 80mm bore. |
| 36 | M&L for burning out lead joint in position , including removing lead to store / stacked at site to issue under credit and new Run lead joint for spigot socket cast iron pipes and fitting, including cauking properly and making joint leak proof of size 100mm bore. |
| 37 | M&L for burning out lead joint in position , including removing lead to store / stacked at site to issue under credit and new Run lead joint for spigot socket cast iron pipes and fitting, including cauking properly and making joint leak proof of size 150mm bore. |
| 38 | M&L for burning out lead joint in position , including removing lead to store / stacked at site to issue under credit and new Run lead joint for spigot socket cast iron pipes and fitting, including cauking properly and making joint leak proof of size 200mm bore. |
| 39 | Taking down existing UNSV sluice valve and supply & fix new Sluice valve of rising spindle type (Gear type) PN-1.6 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and oprating wheel of size 80mm bore. |
| 40 | Taking down existing UNSV sluice valve and supply & fix new Sluice valve of rising spindle type (Gear type) PN-1.6 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and oprating wheel of size 100mm bore. |
| 41 | Taking down existing UNSV sluice valve and supply & fix new Sluice valve of rising spindle type (Gear type) PN-1.6 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and oprating wheel of size 150mm bore. |
| 42 | Taking down existing UNSV sluice valve and supply & fix new Sluice valve of rising spindle type (Gear type) PN-1.6 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and oprating wheel of size 200mm bore. |
| 43 | M&L for rubber tyton joints for suitable for sockets and spigot CI pipes including rubber gasket of size 150mm |
| 44 | M&L for rubber tyton joints for suitable for sockets and spigot CI pipes including rubber gasket of size 200mm |
| 45 | Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box of sluice valve spindle brass including taking apart and reassembling of 200 MM complete all as specified and directed byEngineer-in-Charge. |
| 46 | Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box of sluice valve spindle including taking apart and reassembling of 150 MM complete all as specified and directed byEngineer-in-Charge. |
| 47 | Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box of sluice valve spindle including taking apart and reassembling of 80 MM complete all as specified and directed byEngineer-in-Charge. |
| 48 | M&L in repair of rusted & crack CI water branch connection 80 to 100mm dia by using mechanical joint with connecting all accessories complete all as specified and directed byEngineer-in-Charge. Note :(i) cost of gasket and nut bolts ,washers'jointing of materials as required are inclusive in above job.ii) Required T&P for job is provided by the Contractor is deemed to be included in the item rate.(iii) Excavation for pipe is included in job Work. |
| 49 | M&L in repair of rusted & crack CI water branch connection 150 to 300mm dia by using mechanical joint with connecting all accessories complete all as specified and directed byEngineer-in-Charge. Note :(i) cost of gasket and nut bolts ,washers'jointing of materials as required are inclusive in above job.ii) Required T&P for job is provided by the Contractor is deemed to be included in the item rate.(iii) Excavation for pipe is included in job Work. |
| 50 | M&L for dismantling old wall valve chamber and construction of brick masonary new valve pit chamber of size 900mmx900mmx900mm (internal ) size 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick built in CM 1:6 rendering in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 2.00 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame embeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron applying two coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified and directed. |
| 51 | M&L for dismantling old wall valve chamber and construction of brick masonary new valve pit chamber of size 1200mmx1200mmx1200mm (internal ) size 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick built in CM 1:6 rendering in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 2.00 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame embeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron applying two coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified and directed. |
| 52 | Dismantaling of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 53 | M&L for Cement concrete 1:2:4 B-2 using 40mm graded stone aggregate in foundations, filling and mass concrete |
| 54 | S&F in repair Mild steel work in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 55 | Testing of Treated water (Drinking water) sample as per IS - 10500 including collecting of sample from the pump house and handed over it to the authoriesed (NABL) lab for the testing purpose all as specified and directed. |
| 56 | Testing of Raw water sample as per IS - 10500 including collecting of sample from the pump house and handed over it to the authoriesed (NABL) lab for the testing purpose all as specified and directed. |
| 57 | Horizontal mechanical trencheless Boring hole for crossing metaled road or footpath for GI/CI pipe of any size and making connection all as directed and specified. |
| 58 | S&F in replacement Air release valve of size 80/100 mm along with rubber washer nuts & bolts etc. Complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender