Tender For Renovation Of Swimming Pool With Upgradation Of Toilet/Changing Room At Cgra Meenambakkam Under Ge (I) Cg Chennai
Tender Value
32.50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
19 days left
EMD
65000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Swimming Pool With Upgradation Of Toilet/Changing Room At Cgra Meenambakkam Under Ge (I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | B/R ITEMS |
| 2 | Demolition of floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing rubbish off the premises complete all as specified and as directed. |
| 3 | Material and Labour for Demolition of un-reinforced cement concrete in ground floor and paving not exceeding15cm thick ( below or above ground level ) complete all as specified and directed. |
| 4 | Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.18Sqm but not exceeding 0.38 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 5 | Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group of size matching to floor tile as approved, fixed in vertical surfaces such as in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:4, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed. |
| 6 | Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed. |
| 7 | Material and labour for Chequered cement concrete tiles (Ultra) of any size/shape, 30cmx30cm, 22-25mm thick, set and jointed in neat cement slurry in floors and pointed with grey cement and pigments match to tiles laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 8 | Material and Labour for Ceramic Swimming pool tiles (Crystal Series) of 30cm x 30cm x 10-12mm thick, set, machine pressed; set jointed and, and cut and polished and pointed in neat cement slurry with grey cement and no pigment in floors over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 9 | Material and Labour for Granite stone slab18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 20mm thick screed in cement mortar (1:6) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 10 | Material and Labour for Green Marble stone slab of 18-20mm thick of any shade (table rubbed and polished) laid in Floors and jointed in flooring strips, window cills and jambs etc over and including 20mm thick backing coat in CM 1:6 complete all as specified and directed |
| 11 | Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints and removing rubbish off the premises complete all as specified. |
| 12 | Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed. Note: WPC will be measured and paid separately. |
| 13 | Material and labour for internal rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 14 | Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified. |
| 15 | Supply only integral water proofing compound of approved quality. |
| 16 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed. |
| 17 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 18 | Material and labour for Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 19 | Taking down wooden chowkats or frames with shutter (without taking off shutters from the frames) of size not exc 1.5sqm each complete all as specified and directed. |
| 20 | Taking down wooden chowkats or frames with shutter (without taking off shutters from the frames) of size exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and directed. |
| 21 | Supply and Fix Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on MES Schedule Part-II (2020)complete all as specified and directed |
| 22 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified. |
| 23 | Supply and fix Aluminium powder coated frame with shutter doors for Three/ Two track windows and ventilators including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed.Note : Thickness of powder coating not less than 50 micron. Rate including but rubber beading/neoprene gasket, screws, three/ two track rollers, locking arrangements for windows will not be weighted. Please Enable Macros to View BoQ information |
| 24 | Supply and fix Aluminium powder coated frame with shutter doors for Three/ Two track windows and ventilators including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed.Note : Thickness of powder coating not less than 50 micron. Rate including but rubber beading/neoprene gasket, screws, three/ two track rollers, locking arrangements for windows will not be weighted. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender