Tender For Comprehensive Maintenance For Hq 14 Sect And 58 Rr, Repair/Desilting, Cleaning Manholes Etc In Mahore Of 58 Rr, Repair/ Maintenance Of Lt Panel, Feeder Panel Boxes Etc In Hq 14 Sect, 63Rr,54Rr,33Rr,60Rr,23Rr, 58Rr Units In Sila Grn Under A
Tender Value
50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
16 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance For Hq 14 Sect And 58 Rr, Repair/Desilting, Cleaning Manholes Etc In Mahore Of 58 Rr, Repair/ Maintenance Of Lt Panel, Feeder Panel Boxes Etc In Hq 14 Sect, 63Rr,54Rr,33Rr,60Rr,23Rr, 58Rr Units In Sila Grn Under Age Reasi Of Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 2 | Material & Labour for Brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 4 | Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.Note: water proofing compound shall be measured & paid separately |
| 6 | Supply only liquid water proofing compound complete all as specified and directed. |
| 7 | Material & Labour for Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of wall care putty 3mm thick preparatory to distempering complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 8 | Material & Labour for priming new surface of wall with alkal iresistant priming paint and applying two coats of cement base paint complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 9 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 10 | Material & Labour for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws acomplete all as specified and directed. |
| 11 | Supply and fixing in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness complete all as specified and directed. |
| 13 | Supply and fixing in repair Anodised aluminium snap grid frame work for false ceiling (Size of grid 605 X 605 mm) complete all as specified and directed. |
| 14 | Supply and fixing in repair 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling surface complete all as specified and directed. |
| 15 | Supply and fixing in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 16 | Supply and fixing in repair Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 17 | Taking down Chowkats or frames n. exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 18 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 19 | Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed. |
| 20 | Taking down Shutter exceeding 2.0 Sqm each complete all as specified and directed. |
| 21 | Supply and fixing in repair Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed. |
| 22 | Supply and fixing in repair 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 23 | Supply and fixing in repair 35mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as specified and directed. |
| 24 | Supply and fixing in repair 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type of one side and another face is covered with aluminium sheet, 0.5mm thick, fixed with aluminium alloys screws complete all as specified and directed. |
| 25 | Material & Labour for preparation of new wooden surfaces over10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 26 | Supply and fixing in repair Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows/ventilators all as specified & as shown on drg .CEUZ/TD/1269/2008 SHT 1/1 to 1/3 complete all as specified and directed. |
| 27 | Supply and Fixing in repair Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 28 | Supply and Fixing in repair Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including all fittings complete all as specified and directed. |
| 29 | Supply and fixing in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified and directed. |
| 30 | Supply and fixing in repair Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 31 | Supply and fixing in repair Powder coated Anodised aluminium frame(Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 32 | Supply and fixing in repair Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 33 | Supply and fixing in repair Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. |
| 34 | Supply and fixing in repair Aluminium anodised handle extruded section of size 150mm complete all as specified and directed. |
| 35 | Supply and fixing in repair Aluminium anodised handle extruded section of size 125mm complete all as specified and directed. |
| 36 | Supply and fixing in repair 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 37 | Supply and fixing in repair Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed. |
| 38 | Supply and fixing in repair Aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed. |
| 39 | Supply and fixing Aluminium anodised barrel tower bolts extruded section of size150 mm, complete all as specified and directed. |
| 40 | Supply and fixing in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 41 | Supply and fixing in repair 5.5mm thick plain sheet glass as in window and door shutters with and including rubber gasket and natural colour anodized 15micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 42 | Supply and fixing in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 43 | Securing glass of any description in existing glass in metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputed shall be Measured) complete all as specified and directed. |
| 44 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 45 | Supply and fixing in repair 3 mm thick sheet glass pin headed quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed. |
| 46 | Supply and fixing in repair sheet glass ordinary quality 3 mm thick in squares n exc 0.5 sqm each pane and glazing complete all as specified and directed. |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | Demolition of floor concrete in ground floors and pavings n exc15 cm thickness (below or above ground level) complete all as specified and directed. |
| 49 | Material and Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over 25 mm thick PCC 1:2:4 type B0 complete all as specified and directed. |
| 50 | Material and Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over 25 mm thick PCC 1:2:4 type B0 complete all as specified and directed. |
| 51 | Material & Labour for vitrified tiles double charged,10 mm thick ,area of each tile exc 0.36 Sqm but n.exc 0.42sqm, in floor etc set and jointed in neat cement slurry including 15 mm screed bed CM 1:4 over 25 mm thick PCC 1:2:4 type B0 complete all as specified and directed.. |
| 52 | Material & Labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including incl 10mm thick plaster in cm 1:4 complete all as specified and directed. |
| 53 | S & F in repairs cast aluminium (extruded section body) door closer by hydraulically regulated, designation No.3 univrsal type, suitable for door shutters up to 851mm to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as specified and directed. |
| 54 | Supply and fixing in repairs gratting 125 mm dia with waste hole of PTMT (Min weights 40 gms) complete all as specified and directed. |
| 55 | Supply and fixing in repairs CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union as fixed in repair complete all as specified and directed. |
| 56 | Supply and fixing in repair PVC connections 15mm size 600 mm long as fixed in repairs complete all as specified and directed. |
| 57 | Supply and fixing in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm complete all as specified and directed.. |
| 58 | Supply and fixing in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 15mm complete all as specified and directed. |
| 59 | S & F in repairs 15mm Chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 60 | Supply and fixing in repairs 15mm fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | S & F in repair of 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipeand fixed (minimum weight 90 gms) complete all as specified and directed. |
| 62 | Supply and fixing in repair 15 mm Stop valves, fancy type, chromium platedcast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 63 | S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, fixed in repairs complete all as specified and directed. |
| 64 | Supply and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass ,mounted on 6mm thick AC building board or commercial plywood ,PVC moulded frame and fixed to wooden plugs with cp brass screws and cup washers as fixed in repairs complete all as specified and directed. |
| 65 | Dismantling water tanks and removing to store capacity exceeding 250 ltrs and not exceding 500 ltrs complete all as specified and directed. |
| 66 | Dismantling water tanks and removing to store capacity exceeding 500 ltrs and not exceding 1000 ltrs complete all as specified and directed. |
| 67 | S&F in repair 500 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I complete all as specified and directed. |
| 68 | S&F in repair 1000 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I complete all as specified and directed. |
| 69 | Supply and fixing in repairs PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 lits capacity with 32mm dia PVC bend pipe for low level cistern complete all as specified and directed. |
| 70 | Supply and fixing in repairs vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover but excluding flushing cistern and flush pipe complete all as specified and directed. |
| 71 | Supply and fixing in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and directed. |
| 72 | Supply and fixing in repair Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 73 | Supply and fixing in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore 110 mm inclding dismantling of old U/S pipes complete all as specified and directed. |
| 74 | Supply and fixing in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore 75 mm inclding dismantling of old U/S pipes complete all as specified and directed. |
| 75 | Supply and fixing in repairs PVC (SWR) bends 75 mm dia radius complete all as specified and directed. |
| 76 | Supply and fixing in repairs PVC (SWR) bends 110 mm dia radius complete all as specified and directed. |
| 77 | Supply and fixing in repairs PVC (SWR) vent cowl 75 mm dia complete all as specified and directed. |
| 78 | S&F in repair vitreous china wash basin , white flat back size 550x400mm excluding chain and plug and porcelain stopper but including brackets, including 32mm bore CP based fittings and PVC waste pipe suitable for 32mm bore complete all as specified and directed. |
| 79 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 80 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 81 | S& F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 82 | Supply and fixing 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 83 | Supply and fixing in repair of Brass chromium plated 15mm wall mixer for mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed. |
| 84 | Supply and Fixing in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated complete all as specified and directed. |
| 85 | Supply and fixing in repairs 32mm dia waste coupling of PTMT (minimum weight 45 gms) with PVC waste pipe for WHB/urinal 750mm long complete all as specified and directed. |
| 86 | S & F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and directed. |
| 87 | Supply and fixing in repair 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified and directed. |
| 88 | Supply only GI Elbow/Socket/ Tee of size 15mm bore pipe including necessary plumbing work taking up or down G I pipe and refixing at the same position all as complete all as specified and directed. |
| 89 | Long screw |
| 90 | Socket |
| 91 | elbow |
| 92 | nipple upto 100 mm long |
| 93 | Reducer socket 15/20mm |
| 94 | Reducer socket 25/20mm |
| 95 | Reducer socket 25/15mm |
| 96 | Supply only GI Elbow/Socket/ Tee of size 20 mm bore pipe including necessary plumbing work taking up or down G I pipe and refixing at the same position complete all as specified and directed. |
| 97 | Long screw |
| 98 | Socket |
| 99 | elbow |
| 100 | nipple upto 100 mm long |
| 101 | nipple upto 150 mm long |
| 102 | Supply and fixing in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 103 | S&F in repair coloured Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 104 | S&F in repair stainless steel peg set of six of selected quality fixed to wall with machine thread nuts complete all as specified and directed. |
| 105 | S&F fancy type stainless steel Drapery rods 19/20 mm bore for curtain rails with fixing stainless steel brackets, fancy stainless steel stops and curtain rings (06 Nos per mtr) complete all as specified and directed. |
| 106 | S&F in repair Vitreous China Urinal bowl type or half stall pattern, white (including flush pipe and waste pipe) including Spreader and other accessories and Bracket with fixing arrangement complete all as specified and directed. |
| 107 | Supply and fixing in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 108 | Supply and fixing in repair Shelf of PTMT fixed with including chromium plated brass screw and wooden/plastic cleats (Minimum weight 300 gms ) complete all as specified and directed. |
| 109 | S&F in repair for aluminium Door Seals width 28mm with gasket, 1.5mm thick, fixed in doors in position conform to design complete all as specified and directed. |
| 110 | Cleaning of sewage lines which are blocked/filled with sludge, semi solid/ material etc by roding manholes to manholes manually or by sewage cleaning machine without causing any damage to sewage line/ manholes manholes covers taking out and refixing the covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the 150mm internal dia of pipe complete all as specified and directed. |
| 111 | Cleaning of sewage lines which are blocked /filled with sludge, semi solid/ material etc by roding manholes to manholes manually or by sewage cleaning machine without causing any damage to sewage line / manholes manholes covers taking out and refixing the covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the 100mm internal dia of pipe complete all as specified and directed. |
| 112 | Cleaning of septic tanks, soakage well of any capacity and manholes by Desludging / dewatering including inlet/ outlet chambers, removing out all scum, silt, residuals sludge (both organic and inorganic nature) after plugging the incoming sewage lines through combined high pressure water jetting cum suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the same in the tank to a place outside cantonment at the place meant for the purpose by local municipality, complete all as specified and directed. |
| 113 | Cleaning of blockage of any type of water closet (Indian/pedestal) from water closet pan to Ist manhole in single storied bldg including resetting/ refitting of asccess door in soil pipe where opened without causing any damage to the water closet pan 'P' or 'S' trap and pipe including fitting complete all as specified and directed. |
| 114 | Cleaning of blockage of any type in Nahani trap provided in bath room, kitchen and indoor waste water pipe of kitchen sinks and WHB and removing all the sludge and foreign material from the trap and waste pipe from blocked trap to gully trap/ surface drain wherever opened or without causing any damage to the trap and pipe complete all as specified and directed. |
| 115 | Cleaning of service RCC/Ferro/PVC service/over head tank cleaning process as under (a) Dewatering using submerssible pump/bailing out of water to dispose the minimum level of dirty water from the tank. (b) Cleaning the tank/ UG sump bottom, walls and ceiling using high pressure water jet to dislodge the algae calcinations, dirt etc.(c) Disposing the dirt water sludge etc., using specially designed sludge removal pump.(d) Cleaning the tank inside throughly by using industrial grade vaccum pump to make the tank inside free from dirt, algea and sludge etc.(e) Treating the inside walls, bottom, ceiling of tank including all nooks and corners by using and spraying anti bacterial agent such as hydrogenperoxide (bio degradable) for disinfection of tank inside.(f) Total disinfection and sterlisation of tank hyginecally cleaned and bacteria free and safeby Eco-Friendly for storage of water. Note :- Cleaning of outlet pipe upto stop cock/gate valve by removing and refixing the same and making the line serviceable after cleaning & Qty of tank are consider for cleaning twice in a Year and Date of cleaning to be written over head tank after cleaning. |
| 116 | For exc 250 ltrs and not exc 500 ltrs capacity |
| 117 | For exc 501 ltrs and not exc 1000 ltrs capacity |
| 118 | For exc 1001 lt and not exc 2000 lt capacty |
| 119 | For exc 2001 lt and not exc 5000 lt capacty |
| 120 | S&L in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 121 | Excavation in trenches in soft/ loose soil exc 1.5 m deep and getting out including forming bottom to required level or slop for laying pipe, concrete bed manhole etc n.exc 10 Sqm on plan complete all as specified and directed. (pipe and concrete bed shall be measured and paid separately ) |
| 122 | Returning filling in soft/ loose soil including spreading levelling ,watering and well ramming in layers not exc 25 mm thick complete all as specified and directed. |
| 123 | Removing of excavated surplas materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specified and directed. |
| 124 | Demolition or breaking up 150 mm dia drain pipe including fittings of any desciption in any position and removing rubbish upto a distance of n. exc 50 mtr complete all as specified and directed. |
| 125 | M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 for 150 m bore of pipe complete all as specified and directed. |
| 126 | M&L Reinforced concrete pipes, class NP3, laid and jointed complete with collars 150 mm bore laid in trenches and jointed with CM 1:1 complete all as specified and directed. |
| 127 | Demolition of brick work of any description and in any position built in CM and removing rubbish upto a distance of n exc 50 mtr complete all as specified and directed. |
| 128 | M&L for brick work built in CM 1:4 with sub class 'B' bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 129 | M&L for rendering 15 mm thick on fair faces of brick work internal faces in manhole in CM 1:4 using WPC as per manufacturer instruction incl finishing the surfaces even & smooth without using extra cement complete all as specified and directed. |
| 130 | M&L rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 complete all as specified and directed. |
| 131 | Demolition of reinforced cement concrete as in cover slabs of any description, removal of debris to beyond MoD land complete all as specified and directed. |
| 132 | M&L for precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in manhole cover slab with plain fair faces and set in CM 1:4 complete all as specified and directed. |
| 133 | M&L for TMT mild steel bars 6 mm to 8 mm dia cut to length, bent to shape required, including cracking, bending, spirally for hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips spirally |
| 134 | All as per Ser item no 117 but 10 mm dia MS round bar as in handle |
| 135 | Note: 1. The schedule rates include collecting of complaints from the concerened JE and returning done complaints at the earliest.2. The quantities are tentative and are liable to change as per day to day complaints .3. The Quantities are to be executed in day to day complaints and cannot be explained at the time of handing over of site. |
| 136 | M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. |
| 137 | M & L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class 'B' (old size) bricks laid dry flat, complete all as specified and directed. |
| 138 | S & F in replacement of GI tubing 50 mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 4 Nos with nut and bolt and washers including connecting complete including of suitable length complete all as specified and directed. |
| 139 | Supply and fixin repair 1100 Volts heavy duty round sheathed multistranded three core copper conductor cable of size 2.5 Sqmm for electrical connections to the street lights fittings complete all as specified and directed. |
| 140 | M & L Dismantling and taking down carefully flood light, street light /perimeter lighting luminaries from its position of any size /wattage from over head line poles or from elevated sentry post for carrying out repair/replacement of burt/worn out accessories and removing unserviceable items frim site and depositing to MES store yard at Reasi, including material and insulated copper conductor single core cable 1.5 sqmm size, connector block, screws etc. Refixing the fitting after repair to its position spirally. (Note : Contractor responsibility is to liase with the department concerned for LT supply shut down required to carry out the work & aslo ensure the safety of labour emploued by giving them safety wquipments like helmet, gloves safety blt, discharge rod etc and nothing extra shall be permissible in this account) |
| 141 | Supply and fix in repair Service cable/wire 1100 V flat twin core aluminium stranded conductor of size 10 Sqmm complete all as specifeid and directed. |
| 142 | M & L for cleaning, preparing and painting with one coat of aluminium paint to steel tubular pole 9 mtr long complete with cross arms, MS channels, angle, iron, frame work, etc incl numbering of pole with black enameled paint from stencil, complete all as specified and directed. |
| 143 | S&F in repair DB for street light made out of PVC sheet 3.0mm thick, dust and vermin proof out door type of size 350mmx300mmx150mm (HxWxD) with arrangement of incoming and outgoing feeder with 04 Nos copper bus bar of 32 Amp, for termination of line with and including single MCB SP 230V. 5A 10 KA (in accordance with IS/IEC 60898-1) and making arrangement for fixing aluminium conductor of size 16 sqmm 4 core and copper wire of size 2 x1.5 sqmm with 1 x 1.5 sqmm earth wire in green wire of FR PVC insulated copper conductor from DB to light fitting, complete all as specified and directed. |
| 144 | S&F of 35 W LED Street Light luminaire confirmining incliding all necessary arrangemet for fixing on Pole made up SITC of high quality integrated LED street light with a minimum system lumen of 4500 Lm and system wattage not exceeding 35 W with nominal effiiciency 110 lumen/Watt. CCT of 5700K with SDCM of <5 and CRI>70. The housing should be of non- Corrosive high - pressure die cast aluminum with heat resistant toughened clear glass to with stand extreme environments with PF>0.95. Life time of 50K Hrs @L70. The ingress protection should be minimum IP 66 with IK ratingof 0.7. The luniunaire should have 5 KV internal 10 KV external surge protection in the luminaire including taking down old unsv light fittings complete all as specified and directed. |
| 145 | S&F of 60 W LED Street Light luminaire confirmining incliding all necessary arrangemet for fixing on Pole made up SITC of high quality integrated LED street light with a minimum system lumen of 6600 Lm and system wattage not exceeding 60 W with nominal effiiciency 110 lumen/Watt. CCT of 5700K with SDCM of <5 and CRI>70. The housing should be of non- Corrosive high - pressure die cast aluminum with heat resistant toughened clear glass to with stand extreme environments with PF>0.95. Life time of 50K Hrs @L70. The ingress protection should be minimum IP 66 with IK ratingof 0.7. The luniunaire should have 5 KV internal 10 KV external surge protection in the luminaire including taking down old unsv light fittings complete all as specified and directed. |
| 146 | S&F of 90 W LED Street Light luminaire confirmining incliding all necessary arrangemet for fixing on Pole made up SITC of high quality integrated LED street light with a minimum system lumen of 9900 Lm and system wattage not exceeding 90 W with nominal effiiciency 110 lumen/Watt. CCT of 5700K with SDCM of <5 and CRI>70. The housing should be of non- Corrosive high - pressure die cast aluminum with heat resistant toughened clear glass to with stand extreme environments with PF>0.95. Life time of 50K Hrs @L70. The ingress protection should be minimum IP 66 with IK ratingof 0.7. The luniunaire should have 5 KV internal 10 KV external surge protection in the luminaire including taking down old unsv light fittings complete all as specified and directed. |
| 147 | S&F of 70W LED Flood Light luminaire made up of Matt black ptextured powder coated pressure Die Cast aluminum housing and frame with heat resistant toughened clear glass fixed with SS screw/ Ant dust exposed lens, sturdiness and embossed brand name/ logo name of manufacturer on fixture. The luminaire should have a minimum system lumen output of 10800 lumens and 70 Watts. The fixture shall have a CRI of minimym 70. The fixture shall be designed for a system life of 50000 hours @ 70 % lumen maintenence , Ingress protection of IP 66 (lamp and gear compartement) and Mechanical impact resistance rating of IK>=07. The fixture driver should have an operaing voltage rang of 20-277V, surge protection of 10 KV, PF. 0.95, THD<10% including taking down old unsv light fittings complete all as specified and directed |
| 148 | S&F of 120W LED Flood Light luminaire made up of Matt black ptextured powder coated pressure Die Cast aluminum housing and frame with heat resistant toughened clear glass fixed with SS screw/ Ant dust exposed lens, sturdiness and embossed brand name/ logo name of manufacturer on fixture. The luminaire should have a minimum system lumen output of 14400 lumens and 120 Watts. The fixture shall have a CRI of minimym 70. The fixture shall be designed for a system life of 50000 hours @ 70 % lumen maintenence , Ingress protection of IP 66 (lamp and gear compartement) and Mechanical impact resistance rating of IK>=07. The fixture driver should have an operaing voltage rang of 20-277V, surge protection of 10 KV, PF. 0.95, THD<10% including taking down old unsv light fittings complete all as specified and directed |
| 149 | Supply and Fixing in replacement of old burnt constant current driver suitable for following LED security kight/Flood light fitting of 35 to 60 W capaity complete all as specified and directed. |
| 150 | Supply and Fixing in replacement of old burnt constant current driver suitable for following LED security kight/Flood light fitting of 72 to 100 W capaity complete all as specified and directed. |
| 151 | Supply and Fixing in replacement of old burnt constant current driver suitable for following LED security kight/Flood light fitting of 120 to 180 W capaity complete all as specified and directed. |
| 152 | Supply and fixing in repair aluminium lugs of any type / shape of capacity from 10 Sqmm to 25 Sqmm complete all as specified and directed. |
| 153 | Supply and fixing in repair aluminium lugs of any type / shape of capacity from 35 Sqmm to 95 Sqmm complete all as specified and directed. |
| 154 | Supply and fixing in repair aluminium lugs of any type / shape of capacity from 120 Sqmm to 240 Sqmm complete all as specified and directed. |
| 155 | Supplying and making in renewal straight through joint heat shrinkable type for 1.1 KV grade XLPE cable of sizes 35 to 50 sqmm 3.5 core complete all a specified and directed. |
| 156 | Supplying and making in renewal straight through joint heat shrinkable type for 1.1 KV grade XLPE cable of sizes 70 to 120 sqmm 3.5 core complete all as specified and directed. |
| 157 | M&L for painting to Old LT Panel of different size with Silver Grey synthetic enamelled paint of two Coats complete all as specified and directed. |
| 158 | M&L for Repair to Old LT Panel of different size with Welding work and Painting after Repair with Silver Grey synthetic enamelled paint of two Coats complete all as specified and directed. |
| 159 | S&F in replacement of MCCB 25 to 100 amp, 4 pole 16KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides complete all as specified and directed. |
| 160 | S&F in replacement of MCCB 125 amp, 4 pole, 16KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides complete all as specified and directed. |
| 161 | S&F in replacement of MCCB 160 amp, 4 pole, 36 KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides complete all as specified and directed. |
| 162 | Supply and fixing in repair of Aluminium conductor, stel reinforced of any size on LT Poles including straining, binding with insulators with Al/copper binding wire with insulators as in OH conductors, providing PVC sleeves for jumper fixed as in repairs complete all as specified and directed. |
| 163 | Labour only for Re-stringing/restretching ACSR aluminium conductor laid over, over head LT line on steel/PCC poles after removing binding from insulator and rewinding the conductor with insulator including providing spacer and neew binding wire jumpering provide with after restranining and removing unavoidable sags in the line and trimming of tree and branches on LT line for main clearance complete all as specified and directed. |
| 164 | Labour and tools for trimming tree branches up to 100 mm grith of any location around existing HT/LT OH lines giving clearance of 1.5 m on all sides after arranging shut down and taking all precaution while working on lines incl all T&P required for the purpose complete all as specified and directed.Note: The contractor shall arrange the tree cutting machine and vehicle mounted telescopic ladder for the same. |
| 165 | S & F in replacement old broken post top lantern of capacity 20 W energy saving , environmental friendly, long life aestetically designed with symmetrical light distribution spun aluminium land scape luminaire with high power LEDs as light source. The luminare shall be complete IP65 for optical compartement suitable gor working for input voltage range of 140V to 270 V light shall have power factor more than 0.9 with THD less than 10% having lm of 900W incluging complete GI pipe complete all as specified and directed. |
| 166 | S & F 9 W LED Bollard light fitting with opal arylic diffuser and IP 65 protection power coated squre extruded aluminium housing. Mushroom shape Opal acrylic diffuser is fixed in die cast aluminium frames on four sides for pleasant light output with inbuilt driver with 4.5 kV surge protection. Luminaire is provided with a base plate and fixing holes for directly mounting on the concrete pedestal. LEDs mounted on top die cast aluminium housing and can be separated from base plate for easy maintenance incl taking down old unsv light fittings complete all as specified and directed. Please Enable Macros to View BoQ information |
| 167 | S & F 9 W LED Bollard light fitting with opal arylic diffuser and IP 65 protection power coated squre extruded aluminium housing. Mushroom shape Opal acrylic diffuser is fixed in die cast aluminium frames on four sides for pleasant light output with inbuilt driver with 4.5 kV surge protection. Luminaire is provided with a base plate and fixing holes for directly mounting on the concrete pedestal. LEDs mounted on top die cast aluminium housing and can be separated from base plate for easy maintenance incl taking down old unsv light fittings complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender